Installation Guide

This Remote Control Kit contains the following:

Control Box with Power Cord

Power Cord (6 ft)
 Remote Control

Remote Control Holder
 Screws
 Plastic Anchors
 Wire Connectors
1.
Turn power off at circuit breaker panel or fuse box.
2.
Connect the power cord of control
3. Then mount the control kit to
the wall by two screws
Important: make sure the
control kit
protect
against rain. It may become
control kit.
Mounting the control kit horizontally allows the control kit to vent property
4.
Hardwire a power cord to the fan
socket of control kit
to get power.
This Remote Control Kit contains the following:
Control Box with Power Cord
Power Cord (6 ft)
for Hardwiring to the Fan
Remote Control Holder
Installation
Turn power off at circuit breaker panel or fuse box.
Connect the power cord of control
kit to a 120V/60Hz wall socket.
the wall by two screws
HORIZONTALLY.
control kit
is mounted
horizontally with rain shield wall on top to
against rain. It may become
hazardous to the consumer if water get
Mounting the control kit horizontally allows the control kit to vent property
Hardwire a power cord to the fan
(included in the kit)
. Plug the power cord of fan into the
to get power.
horizontally with rain shield wall on top to
hazardous to the consumer if water get
s into the
Mounting the control kit horizontally allows the control kit to vent property
.
. Plug the power cord of fan into the