BLUETOOTH VOICE ACTIVATED GOOGLE/SIRI SPEAKER MODEL: ISBV39B Please read this user manual carefully to ensure proper use of this product and keep this manual for future reference
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE DEVICE. NO USER SERVICEABLE PARTS ARE INSIDE. PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PRODUCT OVERVIEW TOP VIEW 1 2 3 4 5 6 7 REAR VIEW 8 9 1. Play/Pause, Hands-Free Button 2. Charging Indicator 3. Volume Down Button 4. Volume Up Button 5. Built-in Microphone 10 6. Pairing Indicator 7. Power On/Off, Mode Switch Button 8. AUX-IN Jack 9. Micro-USB Charging Port 10.
RECHARGING THE UNIT The unit has a built-in rechargeable battery, charge it before operation or when it is drained as below: 1. Uncover the rubber cover of the unit. 2. Insert the Micro USB connector of the included charge cable into the DC 5V input, which serves as the speaker’s Micro USB port. 3. Plug the other end of the USB cable into a computer or other compatible device, as shown below. 4.
BLUETOOTH OPERATION 1. Press and hold the “ SOURCE ” button to turn the device on. After powering on, the mode indicator will begin to blink, alternating between blue and green. 2. Activate the Bluetooth menu on the device you wish to connect to the unit. Begin a device search for the speaker. The pairing name " ISBV 39 " will appear on the pairing list. Select it to establish a connection. 3. After a successful connection made, the mode indicator will be solid blue. 4.
INSTALLING GOOGLE ASSISTANT 1. Access the Google Play Store or Apple App Store from your smartphone device. 2. Install the Google Home app onto your smartphone device. 3. Establish a wireless connection from the wireless router to your smartphone. If Wi-Fi is not available, you can use data. 4 . Activate the Bluetooth functionality on your smartphone device. * The Google Home app uses Bluetooth to identify the speaker. 5 .
SETTING UP SIRI ASSISTANT 1. To set up Siri Assistant on your speaker, you need an iPhone, iPod touch, or iPad with iOS 12 or later. 2. To begin, ensure that your iOS device has Bluetooth mode turned. 3. Plug in and turn on the speaker. Then hold your unlocked iOS device within a few centimeters of the speaker, until the setup screen appears. Tap “Set Up” and follow the on-screen instructions.
AUX IN 1. Uncover the rubber cover at the rear of the unit. 2. Insert one end of the auxiliary cable into the external device’s Aux-output jack. 3. Insert the other end of the auxiliary cable into the speaker’s Aux-input jack. AUX IN MP3 Mobile Phone Connect to the hone audio device s ( MP3 layer, mobile phone , or iPod/iPad, etc.) 4. Press and hold the “ S O UR C E ” button to turn the device on. 5. Press the “ S O UR C E ” button to switch to AUX IN mode. The mode indicator will be solid Green. 6.
TROUBLESHOOTING GUIDE Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Won’t turn on Built-in battery is dead No sound or weak sound Volume level of paired/connected device Raise the volume level of the is set to a low level paired/connected device Sound distortion Volume level of the connected/paired device is set too high Reduce the volume level of the connected/paired device The external BT device did NOT pair to the speaker successfully Pair the external
