User Guide

Bluetooth Party Speaker
User’s Guide for Model ISB212 v2902-01
Controls
Charging the Battery
To charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on
computer or USB power adapter (not included) and standard
power outlet. Charging time is approximately 5 hours.
When the battery is low a voice will announce “Low
Battery,” then the unit will automatically power OFF after 3-5
minutes.
While the unit is charging the Charge LED will display a
solid red light. When the battery is fully charged the light
will turn o.
Features
• Bluetooth wireless 5.0: range 60 ft.
• Micro SD card port
• USB port
• Built-in rechargeable battery: approximately 4.5 hrs of
playtime at 50% volume with LED lights OFF
• Micro-USB port for battery recharge
Includes
• User’s Guide
• Micro-USB to USB charging cable
1. Mode: Press to change source modes to Bluetooth, USB
or Micro SD/TF.
2. LED Lights: Press to turn LED lights ON. Repeatedly press
to shue through dierent light modes. Quickly press
two times to turn Rhytmic mode ON/OFF. Press and hold
to power turn LED lights OFF.
3. Volume-/Previous: Press to decrease volume level. Press
and hold to play previous track.
4. Play/Pause/Pair: While playing music, press to play/
pause tracks. Press and hold for 3 seconds to pair
Bluetooth device manually.
5. Volume+/Next: Press to increase volume level. Press and
hold to play the next track.
Note: Press and hold both the Volume+ & Volume- buttons at
the same time to turn voice prompts ON/OFF.
3
1 2
54
Inputs
USB Port
Power Switch
DC Power Input
Charge
LED
TF/Micro SD