Use And Care Manual

Truly Wire-Free Earbuds
User’s Guide for Model IAEBT209 v2419-01
Charger Power
ON/OFF
Main Function Button
Press and hold to power ON.
Press and hold for 2 sec. to skip forward.
Press and hold for 5+ sec. to power OFF.
Earbud Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds in their docking
stations. Be sure to press down so the earbuds make
contact with the charging contacts.
2. Press the Power button on the case to power it ON and
charge the earbuds.
3. When charging, the indicator LEDs on the earbuds will
turn red. When charging is complete, the indicators will
turn blue.
Notes On Charging and Use
• Each earbud must be powered on separately.
• Once the earbuds are linked, powering o one earbud
will power o both.
• Placing the earbuds in the charging case will
automatically power them o and begin charging.
• Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device. The earbuds must have been linked
and connected to a bluetooth device beforehand.
Charging the Case
Using a Micro-USB to USB cable,
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case.
Microphone
Charger Battery Indicator LED
Red when charging.
Flashing red when charging is
complete.
Charger Power Indicator LED
Blue when ON.
Earbud Indicator LED
Red when charging.
Blue when fully charged.