Rhein Tech Laboratories 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix I: Client: Model: Standards: ID’s: Report #: IKUSI – Angel Iglesias R70MP10 FCC 15.249/IC RSS-210 PVT-R70MP10 & 4166A-R70MP10 2007115 Manual Please see the following pages.
70 - MINI ENGLISH 70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. IKUSI reserves the right to modify this information without prior notification.
70 MINI USER’S MANUAL INDEX Pág. 1.- SYSTEM DESCRIPTION: CHARACTERISTICS………………………………………………………..............1 2.- SAFETY INSTRUCTIONS…………………………………………………………….........................................4 2.1.- GENERALS………………………………………………………………………… .......................................... 4 2.2.- HOISTING MACHINERY……………………………………………………………........................................ …4 2.3.- FCC RECOMMENDATIONS……………………………………………………………………………….............. 5 3.- INSTALLATION / SYSTEM ASSEMBLY……………………………………….............
70 MINI USER’S MANUAL 1.- SYSTEM DESCRIPTION: CHARACTERISTICS The systems are based on several handheld transmitter models (with the possibility of single step keypads by function, known as generic transmitter, or double step keypads by function, known as hoisting transmitter) and several receiver models, available with relays or static outputs –PWM outputs-. The radio, integrated in the PCB of the transmitter and the receiver, is ready to work in different ISM bands, according to different models.
70 MINI USER’S MANUAL R70MP10: Receiver with PWM outputs (10 outputs) Available frequencies (ISM bands) Power supply Number of outputs Protection Antenna Working channel selection Weight Dimensions EEPROM Status signaling Conexions Maximum current per output Maximum current output (total) PWM outputs frequency range Output accuracy Electrical input protection Electrical output protections Operating temperature Storage temperature (24h) Storage temperature –long periodsDisconnecting security R70MR11: Recei
70 MINI USER’S MANUAL R70MR06: Receiver with output relays (6 outputs) Available frequencies (ISM bands) Power supply (depending on the model) Number of outputs Protection Antenna Working channel selection Weight Dimensions EEPROM Status signaling Conexions Maximum current over resistive load Operating temperature range Storage temperature (24h) Storage temperature –long periods- 70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.
0 MINI USER’S MANUAL 2.- SAFETY INSTRUCTIONS 2.1.- GENERALS These instructions must be read carefully. This will allow you to install, use and maintain this device in a proper state, reducing the risk of incorrect use. Do not install the equipment in machines for the elevation of people or in explosive atmospheres.
70 MINI USER’S MANUAL 2.3.- FCC RECOMMENDATIONS (only valid for equipment that works in 915MHz ISM band) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
70 MINI USER’S MANUAL 3.2.-RECEIVER Find an easy access location for the receiver, free from obstacles, in order to facilitate the reception of the transmitter’s radio signal, and far away from elements which can produce intense electric disturbance. R70MP10 and R70MR06 models receiver dimensions: R70MR11 model receiver dimensions: 70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso.
70 MINI USER’S MANUAL 3.3.- STARTING UP. TRANSMITTERS: Turning on the T70MG10 transmitter model: 1- Insert the transmitter’s batteries (2 AA type batteries). 2- Press ON/OFF function. The transmitter remains powered. 3- Enter the key code: press simultaneously “7” + “8” functions. 4- Press “10” function. Equivalent to the START function. 5- Transmitter in ON state (solid green LED). Turning on the T70MH3 / T70MH2 transmitter model: 1- Insert the transmitter’s batteries (2 AA type batteries).
70 MINI USER’S MANUAL 4. – TRANSMITTERS 4.1. – Transmitters’ MODELS T70MH3 T70MG10 Generic: máx. 10 functions (1 step) + ON/OFF (without display) Hoisting: máx. 6 functions (2 steps) + 2 AUX: A1 and A2 (1 step) + START + ON/STOP T70MH3D Hoisting: máx. 6 functions (2 steps) + START + ON/STOP (with display) T70MH2 Hoisting (Cat. 3 EN-954-1): máx. 4 functions (2 steps) + START + ON/STOP (without display) The models with LCD display are always required for Tele-Alignment purposes. 70-MINI V.01.
70 MINI USER’S MANUAL 4.2.- MAINTENANCE / TROUBLE SHOOTING GUIDELINE TRANSMITTER’S LED SIGNALLING Correct operating Activated Lost transmitter Status Low battery mode function Green flashing LED ERROR frame found Switches to SWITCHED OFF LATENCY Without signal Red LED and buzzer Without signal mode SWITCHED ON: Red LED + buzzer continuously activated. Red LED + buzzer. Red LED and buzzer TRANSMISSION continuously activated. It MODE (max. 1 min.
70 MINI USER’S MANUAL 5.- RECEIVERS 5.1.- TYPE OF RECEIVERS: CONNECTIONS BLOCK DIAGRAMS R70MP10: PWM OUTPUT RECEIVER (10 OUTPUTS). The voltage DC of the power supply (from 9v to 35v DC, is conducted to the common wiring of the 10 output switches (OUT1 until OUT10), through a SAFETY switch which guarantees the output disconnection in case of breakdown of some of the outputs. The “RELAY” (STOP) switches between 2 fixed positions NO (normally opened) and NC (normally closed).
70 MINI USER’S MANUAL 5.2.
70 MINI USER’S MANUAL 6.- RADIO REMOTE SYSTEM FUNCTIONALITIES 6.1.- GENERALS The transmitter models without LCD display have restrictions with the access to the programation parameters, due to the impossibility to show the Software Menu in Programation Mode. The remote system receiver remembers the last ID used by the last current working transmitter. This transmitter can be considered as the receiver’s owner.
70 MINI USER’S MANUAL 6.3.- BASE CHANNEL CHANGHING (TRANSMITTER MODELS:T70MG10;T70MH3D;T70MH3;T70MH2) T70MG10 TRANSMITTER MODEL 1) With the transmitter switched off, press “ON/OFF”. Transmitter in stand-by or LOW CONSUMPTION mode. 2) Entering base channel changing mode: + BASE CHANNEL CHANGING MODE (Press “5” and “10” functions simultaneously) -> Wait until the orange LED lights continuously.
70 MINI USER’S MANUAL T70MH3D / T70MH3/ T70MH2 TRANSMITTER MODELS 1) With the transmitter switched off, press “ON/OFF”. Transmitter in stand-by or LOW CONSUMPTION mode. 2) Entering in the base channel changing mode: + BASE CHANNEL CHANGING MODE (Press “RIGHT” and “START” functions simultaneously) -> Message in the LCD display: “FREQ CHANGE” 3) The current base channel information is displayed: “Freq Change” “Channel NN” -> (01,02,03……….
70 MINI USER’S MANUAL 6.4 ID RELEASING (LIB ID) (TRANSMITTER MODELS:T70MG10;T70MH3D;T70MH3;T70MH2) T70MG10 TRANSMITTER MODEL It allows releasing the receiver’s ownership of the working transmitter. 1) With the transmitter switched off, press “ON/OFF”. Transmitter in stand-by or LOW CONSUMPTION mode. 2) To enter in LIB ID mode, press simultaneously “4” and “10” functions. + DURING THE ID RELEASING PROCESS THE ORANGE LED BLINKS AND THE BUZZER IS ACTIVE. ID RELEASED PROCESS FINISHED: LED OFF and BUZZER OFF.
70 MINI USER’S MANUAL T70MH3 / T70MH2 TRANSMITTER MODEL It allows to register in the receiver’s database a new transmitter’s ID (maximum = 32 ID) 1) With the transmitter switched off, press “ON/STOP”. Transmitter in stand-by or LOW CONSUMPTION mode. 2) To enter in AUTO ID mode, press “DOWN” and “START” buttons simultaneously + Keep pressed until the orange LED lights continuously. 3) Introduce the “default password” : “ENTER-ENTER-ENTER-ENTER” -> “START” to validate.
70 MINI USER’S MANUAL 6.6 LOST TRANSMITTER SEARCHING MODE (TRANSMITTER MODELS: T70MG10;T70MH3;T70MH2) T70MG10 TRANSMITTER MODEL It allows finding one or more lost transmitters in the same working area. 1) With the transmitter switched off, press “ON/OFF”. Transmitter is stand-by or LOW CONSUMPTION mode. 2) To enter in SEARCH mode, press simultaneously “7” and “10” functions. Keep pressed until the orange LED lights continuously.
70 MINI USER’S MANUAL 6.7 PROGRAMMING PARAMETERS (PARAM) (TRANSMITTER MODELS: T70MG10;T70MH3;T70MH2 ) 1) When executing DOWNLOAD/UPLOAD LOCAL, if the EEPROM is wrong or not connected, the red LED will indicate “EEPROM Error” (red LED blinking during 5 secs. aprox.) and the transmitter switches to PARAM mode, ready to select a new sequence (DOWNLOAD LOCAL or UPLOAD LOCAL or DOWNLOAD REM). 2) In case of “Grave Error”, the red LED and the buzzer becomes active continuously.
70 MINI USER’S MANUAL T70MH3 TRANSMITTER MODEL 1) With the transmitter switched off, press “ON/STOP”. Transmitter in stand-by or LOW CONSUMPTION mode. 2) To enter in PARAM mode, press simultaneously “ENTER” and “START” functions. + Keep pressed until the orange LED lights continuously.
70 MINI USER’S MANUAL 6.8 PROGRAMATION (TRANSMITTER MODEL T70MH3D) The availability to enter in programation mode is restricted to transmitter’s models with LCD (model T70MH3D). The software architecture presents this following message’s levels: 1 M E S 1 M S . E A G X1 S 1 M . E E S A X1 S 1 M . S . E G E X2 A G X1 S . S E X2 A . G X3 E TRANSMITTER’S SWITCH ON PROCESS With the transmitter switched off, press “ON/STOP” during 2 secs.
70 MINI USER’S MANUAL 6.8.1- PROGRAMMING MODE: BLOCK DIAGRAM PROGRAMATION 1 PARAMETERS 1.0 DOWNLOAD LOC 1.1 UPLOAD LOC 1.2 DOWNLOAD REM 2 TELETEACH 3 SEARCH WAIT PLEASE SERCHING LOST EMITTER 2.0 ADJUST 2.1 RESET VALUES CONFIRM RESET 70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. IKUSI reserves the right to modify this information without prior notification.
70 MINI USER’S MANUAL 2.0 ADJUST 2.0.0 PASSWD ID 2.0.1 SEARCHMODE 2.0.2 TOUT LATENCY 2.0.3 TOUT OFF 2.0.4 T STOP PASSWD ID XXXX SERACH MODE ON / OFF TOUT LATENCY MIN N TOUT OFF MIN NN T STOP SEG NN .N 2.0.5 TELEALIGN SELECT OUT 1….10 SELECT OUT START (*) (*) The START relay activation can be programmed as MOMENTARY or LATCHING, as well, while pressing START function. 2.0.5.START OUT MODE (*) OUT MODE LATCH / TEMP 70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.
70 MINI USER’S MANUAL 6.8.2.- PROGRAMMABLE PARAMETERS (TELE-ALIGNED): Parameter PASSWD ID START (Coded) SEARCH MODE TOUT LATENCY TOUT OFF TSTOP OUTMODE SOFTSTART SOFTSTOP Default value xxxx OFF 4min 15min 2sec MOMENTARY ON ON ACCELRAMP 0,1sec DECELRAMP ASSIGN TABLE PWM FREQ 0,1sec Xxx 300Hz 70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.
70 MINI USER’S MANUAL 6.8.3.- OUTPUT PROGRAMMING MODES (TELE-ALIGNED) In Menu 2.0.5.x.0 OUTMODE: select “MOMENTARY” for MOMENTARY OUTPUT and “LATCHING” FOR LATCHED (LOCKED) OUTPUT. OUTPUT PROGRAMMING WITH ONE STEP KEYPAD: “MOMENTARY” OUTPUT MODE or “LATCHING” OUTPUT MODE. 1) RAMP-UP PROGRAMMING (RAMP= ON) 2) ON/OFF PROGRAMMING (RAMP= OFF) V MAX = 100% V MAX = 100% In 2.0.5.x.
70 MINI USER’S MANUAL In 2.0.5.x.3.0 software menu ACCEL RAMP, select: ACCEL TIME SEG NN Tmax = 5s Tmin = 0s V MAX = 100% ▼ ▲ T=0 Tmax = 5s Tmin = 0s T=0 In 2.0.5.x.3.1 software menu DECEL RAMP, select: DECEL TIME SEG NN The ramp up time (up or down) is fully programmable (Tele-Aligned). The programmed time is the time to achieve Vmax. from 0v of the PWM output signal. TWO STEP KEYPAD PROGRAMMING 1) RAMP-UP PROGRAMMING (RAMP= ON) 2 VEL/SPEED = ON V OUT = V max = 100% In 2.0.5.x.
HEADQUARTER - SPAIN IKUSI - Ángel Iglesias S.A. Pº Miramón, 170 20009 San Sebastián SPAIN Tel.: +34 943 44 88 00 Fax: +34 943 44 88 20 ikusi@ikusi.com www.ikusi.com AUSTRALIA - NEW ZEALAND IKUSI ANZ PTY LTD Tel.: +61 3 9720 7022 Fax: +61 3 9720 7422 ika@ikusi.com CHILE INGENIERÍA IKUSI CHILE, LTDA. Tel.: +56 2 335 9661 Fax: +56 2 233 7511 ikc@ikusi.com FRANCE IKUSI FRANCE SARL Tel.: +33 1 43 03 52 22 Fax: +33 1 43 03 52 42 ikf@ikusi.com MEXICO IKUSI-GS MÉXICO, S.A. DE C.V. Tel.
70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. IKUSI reserves the right to modify this information without prior notification.
70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. IKUSI reserves the right to modify this information without prior notification.
70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. IKUSI reserves the right to modify this information without prior notification.
70-MINI V.01.00 (01/07) 120009-0B.pdf 70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. IKUSI reserves the right to modify this information without prior notification.
