Interactive Flat Panel ST65R series User manual Read and keep this instruction. Reserves the right to revise this document and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.
Attention and Safety Warnings Attention: Please read the instruction carefully and put it in a convenient position. Please obey the following installations and operating attentions. 1. The safety and operation description should be read carefully before operating and using the product. Please keep the instruction for the future using. 2. All the warning signs in the Product Operation Guide should be followed. 3.
Attention and Safety Warnings 19. The wall installation (if there was) of the panel is only applied to normal concrete wall, solid wall and wooden wall which can bear the 4 times weight of the panel, for the hanging and lifting on special walls (means the steel structure wall, hollow structure wall and walls in glass and marble materials, etc.), the manufacturer suggest you to consider the safety of hanging or lifting, and operate it after ensuring there is no error.
Standard Accessories No. Name Q’ty Specification (PCS) 1 Power cable 1 3.0m 2 HDMI 2.0 cable 1 3.0m 3 TOUCH cable 1 USB A to B cable ,3.0m 4 USB cable 1 USB A to A cable, 3.
Mounting Instruction Loading Bearing The user could install the panel on the wall or mobile stand according to their own needs. When using mobile stand installation, please choose the one from the manufacture (Optional accessories). If you purchase yourself, be sure the stand could bear at least the 4 times weight of the panel and put it stability.
Mounting Steps Accessories : M8 setscrew * 4 pcs M8 Hexagonal screw * 4 pcs Mount kit * 1 pc Hanger * 2 pcs 6
Appearance Introduction Front side Back side 1 Monitor 5 Speaker 9 Rocker switch 2 Light sensor 6 Front Function ports 3 Power indicator 7 OPS Slot 4 Control function buttons 8 Input and Output port 7 10 Power socket
Appearance Introduction Normal Interfaces and cables HDMI Cable Connect PC Use HDMI cable connects the HDMI port (1) of LED Interactive Flat Panel and PC (Please reference the port function instruction) The USB Cable Connect External touch USB Cable one end connect the USB port (2) which on the silk screen Touch of the LED Interactive Flat Panel, the other end connect the USB port of EXT computer (please reference the port function instruction) (3) Connect the Power Cable The LED Interactive Flat Panel
Appearance Introduction Control Key Functions Function Instruction Picture Power indicator Source input. Return to previous page.
Back side interfaces RS232 Can be used to external device by using RS232 port. TOUCH Can be used to connect external device with the panel to achieve the touch. SD CARD Used to extend the TV storage space. EARPHONE Used to connect with external storage devices, such as USB disk, U HD and mobile HD. External devices can be input by HDMI to achieve the dual display of local and eternal display. Can be used to connect the earphone and sound device.
Remote Control Instruction Basic Operations Turn on the panel Step 1: Use 100V-240V 50/60Hz AC as the panel power supply. The power plug is fully plugged in and the outlet ground wire is well connected. ※ The type of power cord supplied may differ from that illustrated depending on your region of purchase. Step 2: Turn on the Rocker switch (back side of the panel, next to power outlet). Enter standby state, the power indicator turns to red color.
Step 3: Turn off the Rocker switch or plug off the power cable. Notices: Be sure to turn off the PC power before turning off the power, otherwise it may damage the panel. Be sure to turn off the Rocker switch or unplug the power cable, otherwise it may damagethe panel. Do not switch the machine on and off in a short time, otherwise it may damage the panel. OPS installation Step 1: Plug the OPS PC into the OPS interface of the panel; Step 2: Screw the two screws on the OPS to fix it.
Basic Operations Home Page Turn on the panel and enter the panel to Android Homepage by default. The home page has some main menus like Media Class, WhiteBoard, All Application, Browser and Setting. Click “Home “ from remote control or click from shortcut menu to enter homepage again. Shortcut Click and slide from left and right of the screen to call out the shortcut menu. There are “Back, Home, Task, Annotation, Input, Voice” for the users to operate.
All applications Click All Apps icon, the menu includes browser, local video and other download application. Click the icon you want to use the application software. Setting To set the Network, Applications and other General settings.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
