User Manual

ManualsBrandsikeGPS ManualsElectronicsBLE Smart Measure Pro

Manual Development Template

GT&S Tech Docs Graphics Req #: XXXX

This document is meant to serve as a development platform for NPD and maintenance manual

creation/modification.

Product Brand: Stanley

FatMax

DeWALT

Black + Decker

Product Region: North America

Note:

To reduce potential translations and paper usage, all figures and images should be placed at the

top of this document when possible. Reference numbers can be used to relate from body text

to imagery. In the case where minimal translations are required in imagery (EX: North

America), translations can be included in the imagery. In the case where many translations are

necessary in imagery (ex: EU), imagery should utilize numerical/alphabetical labeling followed

by a reference table that includes all translations.

Reviewers

Name

Approve/Revise

Date

Engineering

Bruce Eidinger

Product Management

Dustin Prevete

Graphics

Lori Farthing

Packaging Structure

Jonathan Miller

Branding

Compliance

Matt Ponko

Legal

This table is for contact information and internal approval only. If certain reviewers are not necessary

insert “NA” under name. Engineering responsible for Compliance review coordination.

Anything shown in this color box is informational and should not be included as text/content.

Summary of content (12 pages)

PAGE 1
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX This document is meant to serve as a development platform for NPD and maintenance manual creation/modification. Reviewers Engineering Product Management Graphics Packaging Structure Branding Compliance Legal Name Approve/Revise Date Bruce Eidinger Dustin Prevete Lori Farthing Jonathan Miller Matt Ponko This table is for contact information and internal approval only. If certain reviewers are not necessary insert “NA” under name.
PAGE 2
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX This page should be used for desired imagery direction.
PAGE 3
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX This page should be used for body text. The STANLEY Smart Measure Pro Laser Distance Measurer is an estimation tool that connects to your mobile device to give you the capability to take measurements with the snap of a picture. From that photo you can capture real time measurements including height, width, area, length, and target location. Images and measurements can be shared in multiple formats through email, messages or the cloud.
PAGE 4
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX DO NOT remove any warning label(s) on the housing. This instrument must only be used for tasks as outlined in the Product Manual. ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser beam. DO NOT use in combination with other optical instruments. Do not modify the laser tool, make adjustments or use in other applications than those described herein.
PAGE 5
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX FCC Information Smart Measure Pro Model: STHT77366 Bluetooth Information FCC ID: 2ACBG3000 IC ID: 11952A-3000 FCC Compliance This device complies with Part 15 of the FCC Rules.
PAGE 6
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX End of Life DO NOT dispose of this product with household waste. PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical and electronic waste. Declaration of Conformity This product conforms with IEC60825:2014. For further details please refer to www.stanleyworks.com Maintenance and Care DO NOT allow to get wet. Damage to internal circuits may result. Laser tool is not waterproof.
PAGE 7
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX Range Output Share Options 6ft-492ft (1.8m-150m) PDF, JPG, Smart Measure Pro File Email, Message, Cloud Storage Mounting Your Smart Measure Pro 1. 2. 3. 4. 5. Centrally place Smart Measure Pro on the back of your device. Ensure that Smart Measure Pro does not obstruct the view from your camera or flash. Firmly squeeze the clamp mechanism onto your device To verify, start your device’s camera app and validate the correct placement.
PAGE 8
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX Pairing Your Smart Measure Pro NOTE: The LED indicator shows the status of your Smart Measure Pro: Blue flashing: Smart Measure Pro discoverable over Bluetooth Blue on: Smart Measure Pro connected to device Green flashing: Smart Measure Pro charging Green on: Smart Measure Pro fully charged Off: Power off 1. Turn on Bluetooth on your device. 2. On your Smart Measure Pro, press the Power button.
PAGE 9
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX 4. If the measurement changes at the point where the crosshair moves on and off the vertical edge, your laser is correctly aligned. If this does not happen at the correct point, tap on the left and right blue arrows ➌ to adjust to the correct point. 5. Turn your device horizontally and aiming at the same two objects, repeat steps 3 and 4 to align the laser horizontally.
PAGE 10
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX    The whole object must be on the same surface or plane as explained above. Ensure the crosshair is on a solid surface and not on a window or hole. Use the zoom slider so you can better view the crosshair location on your target, or when you are positioned at a distance from your target.  Make sure you are as square as possible with the target. 2. Tap the Capture button on the screen to take a picture. 3.
PAGE 11
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX 3. Drag the end of the line to the edge of the object you want to measure. Then drag the other end of the line to the other edge of the object.  Use the zoom window to help you align the line precisely to the edges of your object.  The length of your object will display on the screen.  To add another segment to a line, select + (Add) and drag from an existing anchor. To add another line, tap + (Add) to select it.
PAGE 12
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX STANLEY Lasers are covered by: 30-Day Money Back Guarantee. If you are not completely satisfied with the performance of your STANLEY Laser for any reason, you can return it within 30 days from the date of purchase with a receipt for a full refund. IMPORTANT NOTE: The customer is responsible for the correct use and care of the instrument.