Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 Revision: 0.7 Revision date: 2016-07-05 ICC-1 connectivity module Document ID: SCDOC-129-142 Author’s name: Olof Blomé Approver’s name: Tomas Mellblom Revision Author’s name Comment 0.1 Olof Blomé Document created 2016-03-08 0.2 Olof Blomé Formatting 2016-03-09 0.3 Olof Blomé Added: • • • Revision date 2016-04-24 Antenna gain -2.5dBi Limitations on usage Label guidance User manual regulatory info 0.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 Revision: 0.7 Revision date: 2016-07-05 Contents 1 2 3 4 5 6 ICC-1 module description ................................................................................. 4 1.1 Description of ICC-1 .................................................................................. 4 1.2 Pin description .......................................................................................... 5 1.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 Revision: 0.7 Revision date: 2016-07-05 6.1 FCC statement........................................................................................ 16 6.2 Industry Canada statement ...................................................................... 17 Figures Figure 1 - Module with shield can ............................................................................ 4 Figure 2 - Overview pin out numbering for ICC-1 ......
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 1 Revision: 0.7 Revision date: 2016-07-05 ICC-1 module description ICC-1 is a ZigBee module with integrated antenna with highly flexible input and output options. The ICC-1 module will be integrated within the IKEA TRÅDFRI wireless product range and is not a standalone product. • IEEE Std- 802.15.4 compliant RF transceiver • Supports ZigBee / Bluetooth Low Energy (BLE) / Thread on 2.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 1.2 Revision: 0.7 Revision date: 2016-07-05 Pin description The pin out is flexible and all pins can be configured as analogue port or data channel, such as I2C. Each GPIO has its own mux configuration and set of PU and PD. The software is defied for each product. The pin number is counted from the lower left corner, see Figure 2.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 1.3 Revision: 0.7 Revision date: 2016-07-05 Radio front-end and crystal The ICC-1 radio chipset has a built-in balun. The radio output is connected to an antenna using a wave guide type of trace to minimize losses because of the two-layer structure of the PCB. The front-end has a discrete RF-filter to comply with harmonic emission regulations.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 1.5 Revision: 0.7 Revision date: 2016-07-05 Module physical size and footprint • Total width: 18 mm x 24.5 mm • Height, including PCB and shield can: 2.1 mm Figure 4 - Physical dimensions of the ICC-1 module 1.6 Mounting options There are two mounting options for the ICC-1 module: • Wave solder the 6 pin connector to the right in a 90° angle to the carrier board. See Figure 9 - Mounted 90 degree angle.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 2 Revision: 0.7 Revision date: 2016-07-05 Design rules for antenna integration The ICC-1 module can be integrated into various IKEA TRÅDFRI products. Follow the described antenna integration design rules to ensure acceptable and correct radiated performance. The antenna gain is -2.5dBi.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 2.1 Revision: 0.7 Revision date: 2016-07-05 Distance to metal objects Place large metal objects above the indicated surface as shown in Figure 6 and at least 30 mm from the antenna to secure antenna performance. Figure 6 - Metal free area to secure antenna performance 2.2 Distance to plastic objects Place large plastic objects at least 10 mm from the antenna. This can affect the resonance frequency.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 2.3 Revision: 0.7 Revision date: 2016-07-05 Grounding of metal heat sink When using opening A in the solder mask of the Poly PCB as shown in Figure 7, the antenna connection shall be as short and close to antenna feed as possible. A Figure 7 - Suggested grounding point If integrated in LED bulbs, when inserted into an opening the module PCB shall be grounded to the heatsink plate as shown in Figure 8.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 2.4 Revision: 0.7 Revision date: 2016-07-05 Module mounting options If the ICC-1 module needs to be attached to another PCB during the integration process, the connections shall be solid and stable to prevent unwanted effects on the antenna performance. See Figure 10 and Figure 10 for possible attachment methods of the ICC-1 PCB to carrier board.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 3 Power supply for ICC-1 3.1 Regulated power supply Revision: 0.7 Revision date: 2016-07-05 ICC-1 can be supplied from a regulated power supply down to 1.85V in all conditions. During peak load transients, power supply can be up to 145mA when using high power mode. The product designer shall verify unconditional stability during peak load to secure that voltage is not dropping below 1.85V.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 4 Electrical specifications 4.1 Absolute maximum ratings Parameter Revision: 0.7 Revision date: 2016-07-05 Condition Min -40 Max 125 Unit ⁰C Ambient temperature range -50 150 ⁰C Storage temperature VDDMAX External voltage supply 0 3.351 V VDIGPIN Voltage on any GPIO pin except pin 2 and pin 3 -0.3 VDD + 2 V VLFXOPIN Voltage on pin 2 and pin 3 -0.3 VDD + 0.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 4.4 Revision: 0.7 Revision date: 2016-07-05 Transceiver characteristics Parameter Maximum TX power, 802.15.4 DSSS-QPSK Condition Conducted, 3.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 5 Regulatory instructions 5.1 Limitations Revision: 0.7 Revision date: 2016-07-05 ICC-1 shall only be installed in limb-worn devices and only be used as described in this document and cannot be co-located with other antennas or transmitters, exceptionally if specified in the grant condition of the equipment authorization.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 6 Revision: 0.7 Revision date: 2016-07-05 Certification The ICC-1 module is certified with FCC ID: FHO-ICC-1 and Industry Canada IC: 10912AICC1. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For more information, go to: http://www.ecfr.gov/cgi-bin/textidx?SID=a1be5f56bcd8d1391a26085ba51c6478&mc=true&node=se47.1.
Document name: ICC-1 connectivity module FCC ID: FHO-ICC-1 IC ID: 10912A-ICC1 • Revision: 0.7 Revision date: 2016-07-05 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • 6.2 Consult the dealer or an experienced radio/TV technician for help. Industry Canada statement This device complies with Industry Canada’s license-exempt RSSs.
