User Manual

Table Of Contents

TRANSMITTER – E1201C ANSLUTA

USER INSTRUCTION

A. Features

1. Easy and simple to use.

2. Blinking blue LED indicates signal transmission status.

B. Diagram & Descriptions

No.

Description

Function

indicator

The indicator blinks to indicate signal transmission status.

1 OFF，1 ON

Switch on and off the appliances connected to channel 1 receiver E1201

C. Operation

1. Configure

Press the“ON/OFF Learning Code ”button on the receiver until the LED “Indicator” blinks. Then press

any one of the four “OFF” buttons until the red LED “Indicator” goes off. The receiver is trained to

respond to the corresponding channel.

2. Control

PAGE 1
TRANSMITTER – E1201C ANSLUTA USER INSTRUCTION A. Features 1. Easy and simple to use. 2. Blinking blue LED indicates signal transmission status. B. Diagram & Descriptions i ii No. i ii Description indicator 1 OFF，1 ON Function The indicator blinks to indicate signal transmission status. Switch on and off the appliances connected to channel 1 receiver E1201 C. Operation 1. Configure Press the“ON/OFF Learning Code ”button on the receiver until the LED “Indicator” blinks.
PAGE 2
Press the “ON” or “OFF” button to switch on or off the appliance connected to the receiver trained to the corresponding channel. . D. Specifications 1. Battery : 2X AAA 2. Frequency : 433.92 MHz 3. Distance E. : 20 meters max. (in the open air) Holder IKEA of Sweden, AB Manufactory: Everflourish Electrical Co., Ltd. Adress:Renjiu Village, Wuxiang Town, Yinzhou Ningbo 315111 P.R. China This device complies with Part 15 of the FCC Rules.
PAGE 3
—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.