Universal guitar processor / interface for Android USER MANUAL
Contents Table of Contents Contents 2 English 3 iRig UA 3 Register your iRig UA 3 iRig UA overview 4 Installation and setup 5 iRig UA status LED 8 Usage note 9 iRig UA as audio interface 9 iRig UA as FX processor 9 Connecting instruments 9 Play along a song from your device 9 Troubleshooting 10 Specifications 10 Warranty 10 Support and more info 10 2
English iRig UA Thank you for purchasing iRig UA, the first FX processor and interface for Android devices. Your package contains: • iRig UA • Micro USB to Micro USB OTG cable • Quick Start Guide • Registration Card 1x 1x iRig UA is the first digital effects processor and interface to allow universal near-zero latency processing with AmpliTube on all Android devices compatible with Android 4.2 or higher and that support host mode/USB OTG.
English iRig UA overview 1 6 2 3 4 5 1. 1/4” TS Instrument input 2. 1/8” Headphones output jack 3. Headphones volume control 4. AUX input 5. Status/level LED 6.
English Installation and setup 1. Connect the included Micro USB OTG cable to the Micro USB host port on iRig UA. 2. Connect the Micro USB cable to the Micro USB port on your Android device. 1 2 3. Connect your guitar, bass or other mono instrument to the 1/4” input jack on iRig UA.
English 4. Download AmpliTube UA to use iRig UA as FX processor and launch it . AmpliTube UA ikdownloads.com/irigua 5. Connect your headphones, guitar amplifier, mixer or powered speakers to the iRig UA headphone jack to monitor your recording. Adjust the level thru the level thumbwheel on iRig UA. WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high volume. You can adapt over time to a higher volume of sound, which may sound normal but can be damaging to your hearing.
English 1/8" RCA 1/4" 7
English 6. Connect the output jack of your Android device (or any music player) to the AUX input jack on iRig UA for play along a song from your device (e.g., Youtube®, Spotify®, etc) . External audio in 1/8" iRig UA status LED The multicolor LED on iRig UA gives you important information about the iRig UA’s status. NOTE: You can control the input level of the signal on Amplitube UA app. • LED is off: iRig UA is not connected to any power source.
English Usage note iRig UA as audio interface iRig UA can be used as a digital recording interface when connected to a Samsung Professional Audio compatible device or smartphone or tablet with Android 5.0 that supports USB host-mode. iRig UA is compatible with AmpliTube for Samsung Pro Audio as well as any other real-time processing apps which support USB/OTG audio input. No matter where you are, iRig UA delivers a pure high-quality digital input signal.
English Troubleshooting I have connected iRig UA to my Android device, but it’s seems doesn’t works. Remember to always use a OTG cable and make sure that your device support USB host-mode. The iRig UA doesn’t works as audio interface. To works as an audio interface make sure your device support Samsung Professional Audio or Android 5.0. Also, make sure you’re using a real-time processing app which support USB/OTG audio input. Specifications - Maximum Input Level: 8.0 Vpp (+11.
FCC statement This device complies with Part 15.107 and 15.109 Class B of the FCC Rules CFR47: October 2010. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
