Multifunction smartphone camera stand USER MANUAL
Contents Table of Contents Contents 2 English 3 iKlip Grip Pro 3 Register your iKlip Grip Pro 3 Using iKlip Grip Pro as hand-held 4 Using iKlip Grip Pro as tripod 5 Using iKlip Grip Pro as selfie stick 7 Using the Bluetooth shutter 9 Compatible Devices 10 Specifications 11 Warranty 11 Support and more info 11 2
English iKlip Grip Pro Thank you for purchasing iKlip Grip Pro. Your package contains: • iKlip Grip Pro • Wrist hand strap • Device holder • *Bluetooth shutter • Double thread adapter • Quick Start Guide • Registration Card 1x 1x 1x 1x 1x iKlip Grip Pro is the next generation of IK’s well known iKlip Grip. It provides a handheld grip, mini-tripod, monopad, tripod adater and bluetooth shutter for any smartphone or phablet, in a conveniently portable package.
English Using iKlip Grip Pro as hand-held 1. Mount the Xpand holder on the threaded ball at the top of the pole. Alternatively you can mount any camera with standard 1/4”-20 femle thread.
English 2. Fit your preferred smartphone and orientate it by operating the side key. up to 3.58"/ 91mm Using iKlip Grip Pro as tripod WARNING: before to try to open iKlip Grip’s legs, you NEED to unlock the telescopic pole.
English 1. Unlock the telescopic pole by turning it counter-clockwise. 2. Extend the pole and open the legs.
English 3. Place iKlip Grip Pro on a stable surface and place the pole at the heigth desired. The lock the pole by rotating it clockwise.
English 1. Unlock the telescopic pole by turning it counter-clockwise. 2. Extend the pole full lenght and lock it by turning clckwise.
English Using the Bluetooth shutter 1. Turn on the shutter by switching the ON/OFF button on the side of the controller. The shutter controller will enter into pairing mode and the LED indicator starts flashing quickly at the same time. ON 2. Activate the Bluetooth setting on your device and it should “look” for new Bluetooth devices. 3. Select the “Shutter” device from the list and you should be ready to start capturing video and photos using your new shutter controller.
English 4. You can fix the shutter on the body of iKlip Grip Pro thanks to its sledge. Compatible Devices Compatibility list iPhone 6 Plus/6/5s/5c/5, iPhone 4s/4, iPad 4/3/2, all iPad, iPod touch 4th gen. Or newer Built-in camera app Camera360 app Samsung Galaxy S2/S3/S4+, Note 1, Note 2, Note 3+, Tab 2, Note 8, 10.
Specifications Pole length: 45cm Maximum weight applicable: 1kg Holds any smartphones with screens ranging in size from 3.5” to 6” with case on Holding Bracket Width: 54mm (min) - 91mm (max) / 2.13” (min) - 3.58” (max) Material: Thermoplastic Warranty Please visit: www.ikmultimedia.com/warranty for the complete warranty policy. Support and more info www.ikmultimedia.com/support www.iklipgrippro.
Regulatory FCC radiation exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
