Installation Instructions

Open the charging compartment, remove the earphones, the headset
will automatically turn on and pair, the matching process takes about 5
seconds (the indicator light is: the headset is red and blue alternately
flashing quickly, after the successful pairing, the red and blue lights flash
slowly).
Find the corresponding Bluetooth name F9 from the Bluetooth list of
the mobile phone and click pairing. The voice prompt connection is
successful in about 5 seconds. The headphone indicator flashes blue light
every 5 seconds.
When using one ear, just take one of the headphones, select F9 from
the Bluetooth list of the phone and click Pair. After the pairing is
successful, you can use it.
2. Charging Indication
The display will shows the current power when charging for the
charging case. Its full if it shows 100.
Put the earphone to charging case ,the earphone will auto power
off and start charging, the red light of earphone and display will stay light,
after fully charged ,the light will be off.
3.ON/OFF
When putting earphone to charging case ,they will automatically
turn off and charge.
After the earphone is taken out of the charging compartment, it will
automatically turn on, and long touch function area will be turned off for
4 seconds; after turn off, long touch the function area again for 3 seconds
will be turned on.
4.Call
After the earphone is connected to the phone, you can make a call.
Touch the headset function area to answer the call, long touch will
reject the call.
During a call, touch the function area to hang up.
5.Music
When playing Bluetooth music, tap the function area, the music
pauses, and tap again to continue playing music. Touch the function area
triple: the vice earphone volume decrease, and the main volume increase.
Touch the function area twice,the vice ear will play the previous song,
and the main ear will play the next song.
Precautions for use
1. Headphones should be stored in a dry and ventilated environment to
avoid contact with oil, water vapor, steam, moisture and dust, so as not to affect
product performance.
2. Avoid using irritating, organic solvents or items containing these
ingredients to clean the headphones.
3. The earphones should be correctly and professionally used according to
the requirements. Pay attention to the influence of the use environment on the
headphones. To ensure the smooth connection, it is recommended that the
distance between the mobile phone and the earphones be within 10 meters.
4. If the headset is not connected or the communication is not smooth, etc.,
please do not disassemble the headset body and its accessories, otherwise it will
not be guaranteed.
5. Charge the earphone compartment, please use the standard car charger
or the charger specified by the company.
6. To ensure that you use the headset normally, make sure that the headset
is fully charged.
1.Bluetooth Pair