User Guide CUG00028-EN-A01 USER GUIDE Wireless temperature data logger LT2 This device complies with FCC RF radiation exposure limits set forth for general population (uncontrolled exposure). This device must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
User Guide CUG00028-EN-A01 SUMMARY 1 Safety instructions and regulatory compliance .............................................................................................................. 3 1.1 Operating instructions ............................................................................................................................................ 3 1.2 Safety instructions .....................................................................................................................
Temperature data logger LT2 User Guide CUG00028-EN-A01 1 Safety instructions and regulatory compliance 1.1 Operating instructions • For a battery replacement, check the presence of a desiccant bag after an opening. This bag must be replaced after a contact with ambient air during a period longer than 3 minutes. If the desiccant bag turn green, it means you have to replace it (PN : H0Q00012). • Only the use of Ijinus' accessories and consumable ensures the best and the more safely installation.
Temperature data logger LT2 User Guide CUG00028-EN-A01 1.4 Warning to users in the United States Federal Communication Commission Interference Statement 47 CFR Section 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Temperature data logger LT2 User Guide CUG00028-EN-A01 Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’ intention d’autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.
User Guide Temperature data logger LT2 CUG00028-EN-A01 2 Introduction This device is a wireless temperature sensor. It is installed in places where temperature-sensitive products are stored or shipped and need to be monitored. It is able to record temperature data in a memory. The recorded data can be retrieved locally using a radio access point.
Temperature data logger LT2 User Guide CUG00028-EN-A01 4 Configuration of the logger using the software IJITempLab 4.7 4.1 Launch the software IJITempLab 4.7 and connect to the data logger to configure After connection of the Wiji kit equipped with its antenna (or the Wiji key) on the laptop or PC USB port, run the software IJITempLab. NB: at least 1 meter distance is needed between the Wiji antenna and the datalogger for a correct radio connection.
Temperature data logger LT2 User Guide CUG00028-EN-A01 Choose the measuring period by setting the interval and click on the “Begin Measure” button: A pop up will appear confirming the recording state 4.2 Displaying the measures From the graph and/or list of data you find the tab “Export the measures” with the choice of different files format and style. You have 3 options to retrieve the data. Once retrieved, they are displayed on the graph You can zoon into the graph with your cursor clicked.
Temperature data logger LT2 User Guide CUG00028-EN-A01 From this menu you can also save the graph as an image, and other options. 4.3 Data export There are different ways of exporting the data : - You can export the measures directly from the graph by right clicking on it, choosing from this menu “Export to csv”. - The same option is available from the top menu. Choose “File” and “Export to csv”. - Finally to automatically export the data, choose a directory like bellow example : 4.
User Guide Temperature data logger LT2 From the Tools menu you can - Install the Wiji driver or uninstall it - Change the memory recording mode CUG00028-EN-A01 - Change the sensor resolution as desired - Retrieve a sensor configuration From the View menu you can hide the parameters to reveal the graph only in a bigger size IJINUS - 25 ZA de Kervidanou 3, 29300 MELLAC – France : +33 2 98 09 03 30 – Customer Service: +33 2 98 09 03 32 / sav@ijinus.
User Guide Temperature data logger LT2 CUG00028-EN-A01 5 Revision of the document Date Revision 11/21/2019 2A01 Writer(s) Modifications D. MAHE Creation of the document and translation A. TRIBALLIER IJINUS - 25 ZA de Kervidanou 3, 29300 MELLAC – France : +33 2 98 09 03 30 – Customer Service: +33 2 98 09 03 32 / sav@ijinus.
