iBT290 Eng IB (removed Aux-in cable) Size: 153mm x 120mm Printing color: Black Aug 01, 2019 P1 Model: iBT290/iBT290N Bluetooth Wireless Color Changing Dual Alarm FM Clock Radio with USB Charging instruction manual Questions? Contact Customer Service at 1-800-288-2792
iBT290 Introduction Thank you for purchasing the iHome iBT290. This product is designed to provide high quality wireless sound for your Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish.
iBT290 Table of Contents Meet Your iBT290 ............................................................................................................................................ 4 The Display/Setting Up the Unit............................................................................................................... 5 Setting the Time ..............................................................................................................................................
iBT290 Included • iBT290 system • 100V-240V universal AC adapter iBT290 power adapter 3
iBT290 Meet Your iBT290 Top Power/Alarm Reset Button Press to turn unit ON or OFF, reset alarm when sounding Time Set/Sleep Button Alarm 1 Button Press for sleep timer Press and hold for time setting Set and arm/disarm Alarm 1 Alarm 2 Button Set and arm/disarm Alarm 2 Answer Call and Forward/ Plus Settings Button Raise Volume Button Press to raise selected setting Raise volume Color Button Press to cycle color settings Lower Volume Button Lower volume End Call and Reverse/Minus Settings But
Using the iBT290 The Display Aux mode indicator Bluetooth Pairing indicator Alarm 1 and 2 indicators Alarm is armed and will sound at set time Low Backup Battery indicator Sleep mode indicator Wake to indicator FM radio mode indicator PM indicator AM indicator Time display Mode/Bedtime Sleep Timer/ FM station/alarm time display Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. Extend FM antenna.
Using the iBT290 Setting the Time 1. Press and hold the Time Set/Sleep Button for 2 seconds. “CLOCK” will appear in the bottom of the display, the time will flash and a beep will sound. Press the – or + Button to set the correct time (press and hold for rapid setting). Remember to set the correct AM or PM time. The AM and PM Indicators are located to the left of the time digits. 2. Press the Time Set/Sleep Button. The year will flash. Press the – or + Button to set the correct year. 3.
Using the iBT290 Setting and Using the Alarm This unit has a dual alarm system so you can set two separate alarms to different alarm times and wake to sources. Setting the Alarms Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for whichever alarm you are setting. 1. Press and hold the or Button until the alarm icon flashes, the alarm time flashes on the lower part of the display and a beep sounds.
Using the iBT290 5. Press and release the Alarm Button again, then press and release the – or + Button to set the color LED wake cycle: Dawn (amber fade leading up to alarm time), Flash (flashing red while alarm sounds), Glow (glowing color sequence while alarm sounds) or None (no wakeup LED effect). 6. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting mode. 2 beeps will confirm alarm setting is complete.
Using the iBT290 Listening to FM Radio Setting up the Antenna Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas. Tuning and Playing the Radio 1. Press and release the Mode Button as needed to select FM radio mode. 2. When FM mode is selected, press the – or + Button to tune the radio to a desired station. The current radio frequency appears in the lower part of the display.
Using the iBT290 Color Change Mode Color Change Mode can be accessed whether the unit is ON or OFF. There are 4 color settings. Press the Color Button to cycle through them. The settings are: • FADE Slow color change (default): Colors slowly fade in and out continually from one color to the next. • FAST Fast color change: colors change quickly from one to another through the color spectrum.
Using the iBT290 Pairing Your Device Via Bluetooth Whenever AC power is connected, the iBT290 will attempt to autolink to a previously paired device. 1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). 2. Press the Button to turn on the iBT290. 3. Press the Mode Button to cycle to Bluetooth mode, indictaed by “BT” on the display” Pairing Button on top of the iBT290 for 2 4. Press and hold the seconds.
Using the iBT290 Playing Audio Via Bluetooth 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed to select Bluetooth mode (“BT”appears on the display). 3. Press the Play/Pause/Presets Button on the unit to play audio from your linked Bluetooth device. 4. Press the – or + Buttons to go to the previous or next track. 5. Press the or Buttons to adjust the volume on the unit. 6. When done listening, press the Button to turn the unit off.
Using the iBT290 Playing your Aux Audio Device 1. 2. 3. 4. 5. Connect one end of a standard aux audio cable (not included) to the aux jack on the back of the unit and connect the other end to the headphone jack or aux-out jack on your audio device. Press and release the Mode Button as needed to put the unit in Aux-in mode. Use controls on your device to play and pause audio and to navigate tracks and menus. Press the or Buttons to adjust the unit volume.
Using the iBT290 Replacing and Installing Clock Backup Battery Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
Unit doesn’t respond (no sound) • • • • Troubleshooting Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT290. Make sure the Power is ON. Make sure volume is up on your Bluetooth device and on unit. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power source.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read and follow all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B.
FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.