Model: iBT234 Dual Alarm Clock Radio with USB Charging QUESTIONS? Visit www.ihome.
W E L C O M E Thank you for choosing the iBT234 from iHome. This user guide will get you up and running quickly and provide helpful hints to maximize enjoyment. For more information about this and other iHome products, please visit www.ihome.com G E T T I N G S T A R T E D This unit ships with the following items. Please check to see that all items are present.
F E A T U R E S & F U N C T I O N S TOP PANEL Alarm 1 Power/Alarm Reset Reverse Volume Down Bluetooth Volume Up Forward Sleep Alarm 2 Play/Pause Speakerphone/ Siri/Google FM Presets Snooze/Display Dimmer CLOCK DISPLAY PM Indicator ALM. 1 Indicator ALM. 2 Indicator BACK PANEL Battery Back-Up Compartment DST Switch FM Antenna USB DC Jack Charging (7.5V/1.
CONNECTING AC ADAPTOR This unit operates on AC power using the included universal AC adaptor. Place unit on a stable surface. Plug the power adaptor into the DC jack on back of the unit and the other end into a working wall socket. T ESER RESET T SET TEST MAINTENANCE • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish.
B A C K U P B A T T E R Y The unit comes with 2 AA back-up batteries to maintain alarm and clock settings during a temporary power failure. When you power ON the unit and the clock display reads ‘lo batt’, it is time to replace the back-up batteries. The battery compartment is located on the back of the unit. 1. Make sure the AC adaptor is connected, or you will lose your clock settings during battery replacement. 2. Slide the battery compartment door up to open. 3.
SETTING THE TIME: DST SWITCH There is a Daylight Saving Time (DST) Switch on the back of the unit. By default, the switch is set to Auto and will automatically adjust the time at the start and end of Daylight Saving Time. To adjust this manually, move the switch to -1 to subtract an hour or to +1 to add an hour. Setting th e tim e 1. Press and hold the Time Set Button. The time will flash on the display. Press the + or – Buttons to set the correct time (hold for rapid adjustment).
SETTING + USING THE ALARMS This unit features dual alarms which can be set to different times and alarm sources. Each is set in the same way. Instructions are given as ‘Alarm Button’ - press Alarm 1 or Alarm 2 to set respective alarms. 1. 2. 3. 4. 5. 6. 7. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash. Press the – or + Buttons to adjust the alarm time (hold for rapid setting). Make sure you set the correct AM/PM alarm time.
SNOOZE/DISPLAY DIMMER Snooze: Dimmer: When the alarm is sounding, press the ZZZ/Dimmer Button to snooze (default is 9 minutes). Press the ZZZ/Dimmer Button (when alarm is NOT sounding) to adjust display brightness. PROGRAMMABLE SNOOZE Set the duration of your snooze timer: 1. To program Snooze, press and hold the ZZZ/Dimmer Button for 2 seconds during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 1 and 29 minutes). 3.
LISTENING TO FM RADIO Extend FM antenna for best reception. Tu ning a n d P layin g th e R a d i o 1. 2. 3. Press and release any of the four FM Presets Buttons. The current FM radio frequency appears on the display. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). Press the or Buttons to adjust the volume on the unit. USING THE RADIO IN OTHER COUNTRIES Different regions of the world use different FM radio frequency steps and ranges.
BLUETOOTH PAIRING + LISTENING TO AUDIO Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT234. Once your device is paired, the iBT234 can recognize it and you can play your audio through it. 1. Press and hold the Bluetooth Pairing Button located on the top of the unit for 3 seconds. The Bluetooth icon will flash and PAIR will appear on the display and tones will sound indicating pairing mode. 2. “iHome iBT234” will appear on your device’s Bluetooth menu.
SPEAKERPHONE/VOICE CONTROL Using th e S p e ake r p h on e Unit must be ON and paired to a Bluetooth device to use Speakerphone. 1. When a call is received, playing music is muted to hear the ring tone and “CALL” appears on the display. Press the Play Button to answer the call, 2. Press and hold the Play Button to reject or end the call and resume previous function. Using Voice Con trol NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth device to use Voice Control.
TROUBLESHOOTING Symptom Possible Reason Solution Unit won’t turn on AC adaptor isn't plugged into a working wall socket or not plugged into the power jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit. Make sure any associated wall switch that controls the outlet is ON.
IM PO RTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12.
FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LIMITED 1 YEAR WARRANTY iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.