iBT232 Eng IB Size: 153mm x 120mm Printing color: Black Nov 9, 2016 P1 Model: iBT232 Bluetooth FM Clock Radio with USB Charging instruction manual Questions? Contact Customer Service at 1-800-288-2792
P2 iBT232 Introduction Thank you for purchasing the iHome iBT232. This product is designed to provide high quality wireless sound for your Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish.
P3 iBT232 Table of Contents What’s Included ................................................................................................................................................ 3 Meet Your iBT232............................................................................................................................................. 4 The Display/Setting Up the Unit...............................................................................................................
P4 iBT232 What’s Included • iBT232 unit • 100V-240V universal AC adapter • 2 AA batteries power adapter iBT232 3
P5 iBT232 Meet Your iBT232 Top FM/Presets Button Aux Button Sleep Button Alarm 1 Button Bluetooth Button Alarm 2 Button Power/Alarm Reset Button Plus Settings Button Volume Down/ Volume Up Buttons Minus Settings Button End Call Button Answer Call Button Microphone (next to display) Snooze/Display Dimmer Button Play/Pause Button Back Backup Battery Compartment Time Set Button DC 7.5V 1.
P6 Using the iBT232 The Display Time Display PM Indicator Alarm 2 Active Indicator Alarm 1 Active Indicator Setting Up the Unit RESET R ESET TEST T EST Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet that is not controlled by a switch. Extend FM antenna. 5 DC 7.5V 1.
P7 Using the iBT232 Installing and Replacing Clock Backup Batteries Note: 2 AA batteries are included with the unit. Install batteries before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P8 Using the iBT232 Setting the Clock This unit has a Daylight Saving Time (DST) Switch located on the back of the cabinet. By default, it is set to auto and will automatically adjust the time at the start and end of daylight saving time. If your location does not observe daylight saving time or you wish to manually adjust, move the switch to +1 to add an hour or to –1 to subtract an hour. 1.
P9 Using the iBT232 Setting and Using the Alarms (Continued) 1. 2. 3. 4. 5. 6. 7. 8. 9. 8. Press and hold the Alarm Button for 2 seconds until the alarm time display, alarm button and alarm icon flash. A beep sounds. Press the or Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the display; there is no AM indicator. Press the Alarm Button to confirm the alarm time setting.
P10 Using the iBT232 Snooze/Display Dimmer Button 1. 2. 3. 4. 5. While the alarm is sounding, press and release the Snooze/Display Dimmer Button to temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be used several times during alarm. To adjust the brightness of the display, press and release the Snooze/Display Dimmer Button during normal operation (when no alarm is sounding) to cycle through the brightness display settings, including turning the display off.
P11 Using the iBT232 Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets 1. Press and release the FM Presets Button. The FM current FM station frequency appears on the display. 2. Press and release the FM Presets Button as needed until the preset number (P1- P6) you wish to set is displayed, then press and hold the FM Presets Button to enter setting mode. 3. Press the or Buttons to tune the radio to the desired station (hold to scan for the next clear station). 4.
P12 Using the iBT232 Pairing Your Bluetooth Device Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT232. to a previously paired device. Once your device is paired, the iBT232 can recognize it and you can play your audio through it. For manual pairing, follow steps below. 1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). 2.
Using the iBT232 Playing Audio via Bluetooth 1. 3. 4. 5. 6. Press the Bluetooth Button to turn the unit ON in Bluetooth mode. “bt” appears on the display and the Bluetooth Button lights up. Press the Play/Pause/Voice Control Button on the unit to play audio from your linked Bluetooth device. Press the or Buttons to go to the previous or next track. Press the or Buttons to adjust the volume on the unit. You may need to adjust the volume on your device, too.
P14 Using the iBT232 Playing Audio via Aux-In 1. 2. 4. 5. 6. Connect one end of a standard stereo 3.5mm audio cable into the aux-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. Press the Aux Button on the unit to turn it on in AUX mode, indicated by “AUX” on the display and the Aux Button lighting up green. Place your audio device in play mode. Navigate tracks and adjust output volume on the device.
P15 Using the iBT232 Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Charging Port on back of the unit and connect the other end to the charging port on your device. It’s often best to use the charging cable supplied with your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it.
P16 Using the iBT232 Battery Use Cautions and Tips • • • • • • • • • • • • • Only use the recommended/supplied batteries or equivalent Use alkaline batteries for longer life Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries Insert batteries with proper polarity (+/–) as indicated Remove exhausted batteries from product Recharge rechargeable batteries under adult supervision Do not attempt to recharge non-rechargeable batteries Do not open bat
P17 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P18 iBT232 FCC Information FCC ID: EMOiBT232 IC: 986B-iBT232 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P19 Unit doesn’t respond (no power) • • • Troubleshooting Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT232. Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup batteries. Let unit stand for 2 minutes. Re-install backup batteries and connect unit to power source.
P20 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.