iBT16 IB Size: 153mm x 120mm Printing color: Black Nov 28, 12.
P2 Introduction iBT16 Thank you for purchasing the iHome iBT16. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 iBT16 FCC Information FCC Radiation Exposure Statement FCC ID: EMOIBT16 IC: 986B-IBT16 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Table of Contents iBT16 Meet Your iBT16 ........................................................................................................... 1-2 Charging the Unit.............................................................................................................3 Using Bluetooth:Pairing Your Device .....................................................................................4 Playing Audio Via Bluetooth............................................................................
P5 iBT16 Meet Your iBT16 Back Micro USB Charging/ Audio-in Port Power/Charging/Pairing Indicator Light Aux-out Jack Power Off/Bluetooth/Aux Switch 1
P6 iBT16 Included • iBT16 system • Micro USB to USB/3.
P7 Using the Charging the Unit 1. Connect the micro USB plug to the micro USB charging port on the back of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. For first time use, charge unit for about 8 hours. 3. The Power/Charging/Pairing Indicator Light on the back of the unit glows red steadily while the unit is charging and turns OFF once the unit is fully charged.
P8 Using the Using Bluetooth: Pairing Your Device iBT16 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Move the Power OFF/Bluetooth/Aux Switch on the unit to the Bluetooth position (center). The unit will turn on and attempt to auto link to a previously paired device for 10 seconds, indicated by a 3 note tone and the Power/Charging/Pairing Indicator Light on the back of the unit flashing blue.
P9 Using the iBT16 Pairing with a Different Device 1. When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must turn off the Bluetooth capability of the already paired device. Playing Audio Via Bluetooth 1.
P10 Using the Playing Audio via Aux In iBT16 1. Move the Power OFF/Bluetooth/Aux Switch to the Aux position (right) to listen to audio via aux in. The Power/Charging/Pairing Indicator Light on the back of the unit will glow blue. 2. Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device. 3.
P11 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
P12 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P13 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P14 Troubleshooting Unit doesn’t respond (no power) • • • • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT16. Make sure the Power OFF/Bluetooth/Aux Switch switch is not in the OFF (left) position. Trouble pairing device/computer with iBT16 Bluetooth implementation varies depending on your device’s hardware and operating system. Please see our website for updates on pairing.
P15 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.