User's Manual

INSTRUCTION
MANUAL
Product Overview
1.
2.
3.
4.
5.
6.
1. Indicator/Microphone
2. Touch Area
3. Silicone Ear-tips
4. Earphones Charging Contacts
5. Charging Case Indicator
6. USB-C Charging Port
-1-
Thank you for purchasing your new true wireless
earbuds.
W
e recommend that you spend some time reading
this instruction manual in order to fully understand
all the operational features it oers.
Read all the safety instructions carefully before use
and keep this instruction manual for future reference.
Safety Rules
1. Charge the earbuds and the charging case at least
once every 6 months.
2. Do not store the product in extreme temperature
(below 0℃ or above 45℃）
3. Do not use chemicals or detergents to clean the
product.
4. Do not drop or knock the product on hard surfaces.
5. Do not scrape the surface of product with sharp
objects.
6. Do not try to take the product apart.
Specification
Battery capacity
Bluetooth version
V5.1
BT profiles support
SPP/HFP/A2DP/AVCTP/HID
50mAh for each earbuds
400mAh for charging case
Charging time
Around 1.2 hour
Playing time
Around 5 hours
Up to 20 hours with
charging case
Talk time
3-5 hours
Earbuds weight
5g each
Case weight
10g
Power ON/OFF
Power ON
1. Take the earbuds out of the charging case the
earbuds will power on automatically.
2. Long press the left and right touch area of the
earbuds for three seconds, the earbuds indicator
light flashes red and blue, and the earbuds powered
on.
Power OFF
1. Put the earbuds into the charging case, the earbuds
will power o automatically.
2. Long press the left and right touch area of the
earbuds for eight seconds, the earbuds indicator
light turn o, and the earbuds powered o.
Pairing
1. When using PT-30 True Wireless Earbuds the
first time. Take the earbuds out of the charging case,
the earbuds indicator lights flash red and blue the
“pairing mode” is on.
2. Turn on Bluetooth on your mobile device.
3. Search and select “PT-30”.
4. When successfully connected, the blue LEDs flash
every 5 seconds.
Remark: Earbuds power o when they stay out of
range for over two minutes.
Find Your Fit
Choose the size of silicone ear-tips that you feel the
most comfortable with.
Wireless Earbuds
Portable Charging Case
Type-C Charging Cable
User manual
Ear-Tips x 4 (S/M/L)
In the Box
Charging
1. Fully charge both the earbuds and the charging case
before the first use.
2. To prevent damage, use the provided USB-C cable.
3. Fully dry o the earbuds and the USB port before
charging.
4. Charging takes around 1.2 hours.
5. When fully charged, all LEDs will stay on.
Bluetooth range
10 m / 33 ft
Frequency response
20 Hz - 20 kHz
Multi Functions
Pause/Play
Previous Song
Next Song
Volume Down
Volume Up
Active Siri/Google
Assitant
Answer/End a call
Refuse the call
Single tap L/R
Double tap R
Double tap L
Long press L
Long press R
Triple tap L/R
Tap L/R
Long press L/R
-2-
-3-
-4-
-5-
-6-
Factory reset
1. Ensure L&R disconnect to any device. (trun o the
bluetooth device connected before)
2. Triple tap the touch area of the left and right earbud.
3. When hear the prompt tone, The earbuds is ready to
pair with your device now.
WARNING
1. Listening to earbuds at high volume levels,
particularly over extended periods of time, may
damage your hearing.
2. Supervise children when using equipment. This
product is not a toy.
3. The small parts included with this product can be a
choking hazard. This product is not intended for use
by small children and should be kept away from
children under 3 years of age.
MADE IN CHINA
True Wireless Earbuds
Model NO.: HM-AU-BE-218
-7-
EARBUDS
Red LED
No LED
Charging
Fully Charged
CHARGING CASE
Blue LED blinks
Four Blue LED
Charging
Fully Charged
PT-30
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does ause harmful interferenceto radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.