iHealth Wireless Scale Lite User Manual TABLE OF CONTENTS WELCOME BOX CONTENTS MOBILE DEVICE COMPATIBILITY COMPANION MOBILE APP ACCESS IHEALTH CLOUD USING THE IHEALTH WIRELESS SCALE LITE SCALE HANDLING & USAGE SOFTWARE UPDATES PRODUCT SPECIFICATIONS SAFETY INFORMATION TROUBLESHOOTING CARE & MAINTENANCE WARRANTY INFORMATION EXPLANATION OF SYMBOLS ON UNIT
WELCOME Congratulations on your new iHealth Wireless Scale Lite with Bluetooth® Smart Ready technology. This Scale tracks your weight and BMI and, along with the free companion “iHealth MyVitals” app, can help you stay motivated and reach your weight goals.
Go to www.ihealthlabs.com, then click on “Sign In” to access your cloud account from a PC or Mac using your iHealth ID. USING THE IHEALTH WIRELESS SCALE LITE 1. Install the batteries Open the battery compartment on the bottom of the Scale and install the batteries. 2. First-time Use For your first weigh-in, follow these steps to ensure the Scale and the app are connected and that the date and time synchronize correctly. If you have an iOS device: 1.
SCALE HANDLING & USAGE • The iHealth Wireless Scale Lite can measure weights up to 400 lb. • For best results, the Scale should be used on a flat, hard surface. Soft surfaces, such as carpeting or rugs, may affect the accuracy of your reading. • The iHealth Wireless Scale Lite has an automatic shut-down feature to conserve battery power. The following scenarios will cause the Scale to go into automatic shutdown mode: º One minute has passed after completion of successful weigh-in.
Body Weight: 11 lb - 400 lb / 5 kg - 180 kg 9. Accuracy: Body Weight: ±0.5kg/1.1Lb (5kg~50kg/11Lb~110Lb); ±1% (50kg~180kg/110Lb~400Lb); 10. Operating temperature: 5 ℃ - 40 ℃ (41°F~104°F) 11. Operating humidity: 20 - 85%RH 12. Environmental pressure for operation: 86~106kPa 13. Storage and transport temperature: -20 ℃ - 55 ℃(-4°F~131°F) 14. Storage and transport humidity: ≤90%RH 15. Environmental pressure for storage: 50~106kPa 16. Scale resolution:0.2lb/0.
warranty for this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Scale display shows “Er 1.” Maximum weight has been exceeded. The maximum weight allowed is 400 lb/180 kg. Scale displays “Er 2.” The Scale can’t capture a steady reading. 1. Allow the Scale to shut off completely before trying again. 2. Place feet on the center of glass platform and stand still. Scale displays “Er 4.” Bluetooth connection error. Reset the Bluetooth connection by turning it off and on in your mobile device setting. Scale displays “Er 9.” Scale memory access error.
Please recycle where facilities exist. Waste electrical products should not be disposed of with household waste. Check with your local authority or retailer for recycling advice. Manufacturer Keep dry Complies with RTTE 99/5/EC Requirements ANDON HEALTH CO., LTD. No. 3 Jinping Street, YaAn Road, Nankai District, Tianjin 300190, China. Tel: 86-22-60526161 Bluetooth® associated logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by iHealth Lab Inc.