Installers & User guide Rim Lock for Wooden Door. RW1 Version 0.
Welcome! This guide will get you up and running with your Rim Lock for Wooden Door. In the meantime, you should follow us on Facebook and Youtube! Like us on Facebook Visit our Youtube As our igloohome app is frequently updated, there may be changes to this manual. Please refer to our website igloohome.co/support for the latest version of the manual.
Table of Contents What’s Included 4 Specifications 5 Installation Guide Requirements Checking Lock Orientation Installing/Replacing Batteries 6 7 8 Installation Instructions 9 User Guide Lock Anatomy Features Unlocking from the Outside Unlocking from the Inside Locking from the Outside Locking from the Inside App Onboarding Managing Access in App Lock Behaviour Emergency Jumpstart 14 15 17 19 22 23 24 25 27 29 Audio and LED Indications
What’s Included Front Assembly Back Assembly 1.5mm 2.5mm x2 Striker x2 Base Plate 3.
Specifications Model Rim Lock for Wooden Door Battery Type Battery Life Emergency Power Battery Operating Temp Operation Temp IP Rating Front Assembly Material Back Assembly Material Weight Unlock Mechanism 4 x AA* Alkaline Up to 10 months 9V Alkaline Battery -10°C to 50°C -25°C to 50°C IP54 Aluminum DC, ABS, PC Zinc, ABS, Stainless Steel Net: 1.4kg, Gross: 1.
Installation Guide Requirements Clearance Door Thickness > 90mm 179mm a b c Measurements 6 a Supported Wooden Door Thickness : 25 - 60 mm b > 30mm c Backset: > 50mm (default)
Checking Lock Orientation Back Assembly Orientation Left Hand Installation ‘LH’ Lock Assembly Orientation Hinge Outside * Hinge is on your right. Right Hand Installation ‘RH’ Lock Assembly Orientation Hinge Outside * Hinge is on your left.
Installing/Replacing Batteries Remove the battery cover by sliding it off. Battery Cover Close the battery cover by sliding it back into place.
Installation Instructions Door Preparation Using the provided drill sheet, drill a 32mm (diameter) hole where the lock will be installed. > 50mm Backset Preparing the Back Assembly Remove both screws from the back assembly in order to remove the base plate.
Installing the Front Assembly Install the front assembly on the door’s exterior. Secure it in place with the base plate on the door’s interior with the provided screws. Screws BH M5 X 25 x2 for 24 - 35mm door BH M5 X 35 x2 for 35 - 45mm door BH M5 X 55 x2 for 45 - 60mm door * NOTE: The length of screws to be used depends on the thickness of your door. Securing the Base Plate Use the six screws to secure the base plate in place.
5 Inserting the Connecting Cable Insert the connecting cable firmly into the back assembly. Connecting Cable 6 Installing the Back Assembly Align the back assembly with the base plate and secure it with four screws.
7 Installing the Striker Position the striker on the door frame such that the bolt tongue can extend smoothly into the striker. Use provided shim plates if needed. Secure the striker with four screws, if needed, use longer ones provided.
8 Inserting the Batteries and Completing the Installation Insert the batteries and slide battery cover into place. Installation is complete once the lock powers up and a start-up alert is heard.
User Guide Lock Anatomy Front & Back Assembly Thumbturn Low Battery Indicator Auto lock Sensor Deadbolt RFID Reader LED Indicator Touch Screen Keypad Unlock Clear Multi-Function Button 9V Jumpstart Battery Cover 14
Features PIN / Bluetooth Unlock Master PIN Code Bluetooth Master Key The lock unlocks with a permanent Master PIN Code. The lock unlocks with Bluetooth via the app. Bluetooth Guest Key User PIN Code The igloohome mobile app can generate multiple types of User Pin codes, e.g. One-Time, Permanent, Recurring & Duration. The igloohome mobile app can generate and share Bluetooth Guest keys. RFID The lock is able to register up to 100 key cards.
Features Security / Alarms Security Lockout Activity Logs Keypad or RFID is disabled after several incorrect access attempts to ensure your property is always secure. Entry via PIN codes and Bluetooth Key will be logged in the app. Privacy Mode When enabled, lock will only unlock via master Bluetooth key. PIN codes, RFID credentials will not be accepted until function is disabled. Passage Mode Activate Passage mode via the MultiFunction Button or turning auto lock off via Bluetooth.
Unlocking from the Outside a Bluetooth 1. Open your igloohome app 2. Tap on the icon 3. The LED Indicator will flash green twice with 4 short ascending tones once unlocked. Home Rim Lock for Wooden Door b PIN Code 1. Press any button on the keypad to wake device up 2. Key in a valid PIN code (with or without masking pins) followed by the icon 3. The LED Indicator will flash green twice with 4 short ascending tones once unlocked.
c RFID 1. Tap the registered RFID tags/stickers on the icon 2. The LED Indicator will flash green twice with 4 short ascending tone once unlocked.
Unlocking from the Inside a Multi-Function Button Press the Multi-Function Button to Unlock.
b Bluetooth Unlock 1. Open your igloohome app 2. Tap on icon 3. The LED indicator will flash green twice with 4 short ascending tones once unlocked.
c Thumbturn Twist the thumbturn in an anti-clockwise direction to unlock.
Locking from the Outside a Auto Lock The Rim Lock automatically locks when door is closed. User can configure the delay or deactivate* Auto Lock if they prefer to. b Manual Relock Press and hold the icon on the bottom right of the keypad for 2 seconds until the LED Indicator shows green with a long beep.
Locking from the Inside a Multi-Function Button b In the case that Auto Lock function is disabled or does not work, after closing the door, user can alternatively press the Multi-Function Button to manually lock the Rim Lock for Wooden Door from the inside.
App Onboarding Test Factory PIN Code Unlock In the factory mode (before pairing), the PIN to unlock is 2 1234567890 Register as a Lock User a) Download the igloohome app from App store / Play store. b) Create an account and login. 3 Pairing a) Select [Add new igloohome lock] Note: For existing users with other paired locks, go to [Add and Manage], select [Add Locks] and follow the instructions.
Managing Access in App Creating PIN codes PIN codes can be generated on the app under [Access], create [+Access] and choose either One-Time, Permanent, Duration PIN or Recurring PIN. Pin codes will expire if it’s not use within its activation period. Refer to the table below.
Managing Access in App 3 Adding Key Card 1. Under [Access], select [+Access] followed by [Keycard]. 2. Wait until the confirmation of the lock by an audio indicator (long beep). 3. Tap key card(s) on the lock to add and then rename the key card(s) on the App right away. 4. Follow instructions on the app and select [Done] to complete the process.
Lock Behaviour Security Lockout After several incorrect PIN code or RFID attempts, the corresponding entry method will be locked out and the security alarm will be triggered. Note: You may attempt other methods of entry (Bluetooth unlock, manual unlock via MultiFunction button etc.) to override the lockout mode.
2 Privacy Mode Privacy Mode prevents others from using PIN code and RFID tag/stickers to unlock when you are inside the property. It can be activated when the Rim Lock for Wooden Door is locked. Note: Bluetooth can be used to unlock in this mode. 3 Passage Mode Passage Mode enables you to have easy access during high human traffic flow by deactivating auto lock. It can be activated when the Rim Lock for Wooden Door is unlocked.
Emergency Jumpstart 9V Jumpstart 1. Hold the battery contacts against the 9V jumpstart contact points on the lock. You will hear a series of beeps and the keypad will light up. 2. While holding the 9V battery to the jumpstart, key in your PIN code on the keypad followed by the icon. Please ensure terminals of the 9V battery are in contact with the jumpstart contact points of the lock for 2 seconds to activate your lock.
Audio and LED indications Actions Bluetooth Connection 30 Indications LED Indicator flashes Blue Successfully Unlocked Ascending 4 fast tones after unlocked and flash Green LED 2 times Successfully Locked 1 long beep after product is locked and Green LED for 2 seconds Incorrect PIN 4 short beeps and flash Red LED 2 times Invalid RFID Descending 4 fast tones Obstruction Alarm 6 sets of 4 short beeps Keypad Disabled Mode Activated Ascending 3 fast tones Keypad Disabled Mode Deactivated Ascendi
Troubleshoot Pairing is unsuccessful • Try with a different mobile device, using the same username and password • Update your phone’s operating system to the latest version • Restart the Bluetooth and Internet connection on your mobile device • Restart igloohome app on your mobile device • Switch to a new set of batteries Unable to use a 9V battery to jumpstart the lock • Please ensure the two pins of the battery is in contact with the 9V jumpstart contact points securely while unlocking it • Please unlock
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
For enquiries go to: igloohome.