Users Manual

AIRTIME

™

ANC

TRULY WIRELESS EARBUDS

WITH ACTIVE NOISE CANCELLATION TECHNOLOGY

Quick Start Guide

Factory Reset

If you have functionality issues, a factory

reset can help. Here’s how to perform one.

1. Place both buds in the case.

2. Press and hold the center pairing button

for 20 seconds.

3. The case LEDs will illuminate in a wave

from left to right and then from right

to left.

4. The earbuds are now reset to the

factory settings.

5. Go into your device’s Bluetooth settings

and remove the Airtime ANC earbuds.

Then re-pair them to your device.

Having Trouble?

Our IFROGZ customer support team is

available should you have any needs:

Online: www.support.zagg.com

Or give us a call at: 1-800-700-9244

Label

PAGE 1
Factory Reset If you have functionality issues, a factory reset can help. Here’s how to perform one. 1. Place both buds in the case. 2. Press and hold the center pairing button for 20 seconds. 3. The case LEDs will illuminate in a wave from left to right and then from right to left. 4. The earbuds are now reset to the factory settings. 5. Go into your device’s Bluetooth settings and remove the Airtime ANC earbuds. Then re-pair them to your device.
PAGE 2
MUSIC CONTROLS Introduction Welcome to truly wireless audio and our highly-coveted ANC earbuds with up to 25 hours of noise-canceling playtime. Pairing the Wireless Earbuds with Your Device 1 Simply open the case with the earbuds still inside. Press and hold the pairing button in the center of the case for two seconds. The two left and right LEDs on the case will alternate flashing. A pairing signal will be sent to your Bluetooth® device.