3DK1455001-C4口袋灯-说明书英中 尺寸：85x85mm 40P 材质：128g双铜 2022.8.
HL1 C4 RGBW Handy Light User Manual 3DK1455001
Thank you for purchasing this iFootage product. This manual provides important user information for the HL1 C4 Handy Light. Please read the manual carefully before operating the equipment and keep the manual safe for future reference. The HL1 C4 is a portable, flexible,RGBW handy light and features colour temperature, HSI, special effects and multi-light control.
FEATURES 1. The colour temperature range is 2700K~10000K. A CRI RA value of 95 is achieved when the colour temperature range is between 2700K and 7500K. 2. A customized TIR lens improves LED energy consumption. 3. The rotating lights ensure more realistic shadows. 4. Quickly move between spot light and soft light functions. 5. The rear of the handy light is magnetic allowing the light to be attached to metal surfaces. 6.
PRECAUTIONS 1. Do not expose to water or other liquids. This product is not dustproof or waterproof. 2. Please ensure that you do not apply pressure to the OLED screen as this may result in permanent screen damage. 3. Do not look directly into the LED bead lights as this may impair vision. 4. When the product is not in use for an extended period of time, it is recommended that it should be discharged and recharged to a minimum of 60% power in order to preserve the life of the battery. 5.
COMPONENT DESCRIPTION 1 2 3 5 4 6 8 7 9 1 Display 6 Soft cover (detachable) 2 On/Off Power Button 7 1/4”Thread 3 Type-C Charging Port 8 “＋”Key / Previous 4 SET Button 9 “－”Key / Next 5 Back Cover 3
USER GUIDE Functions: User operation instructions Key features On/Off Power Button SET Button Type-C Charging Port “＋”Key / Previous “- ”Key / Next On/Off Power Button 1. To turn on the HL1 C4, press and hold the power button for 3 seconds, then release the power button when the screen lights up. 2. To turn off the HL1 C4, press and hold the power button for 3 seconds, then release the power button when the screen turns off. 3.
USER GUIDE Display The main display interface shows colour temperature, HSI, special effects, Bluetooth reset, and additional settings (colour temperature, HSI, effects, green/ magenta, saturation and brightness are all adjustable).
USER GUIDE Soft Cover When the soft cover is removed the light will create a spot light effect. With the soft cover attached the light will create a soft light or diffused effect. Once removed, the soft cover can be safely housed on the back case.
USER GUIDE Built-in magnets in the back case Magnets have been located in the back casing so that the lights can be securely attached to metal objects. For example: Metal shelving 1/4”thread The base of the light has a 1/4" thread designed for attaching to most accessories.
Mode Selection CCT Mode The adjustable parameters within colour temperature mode are: colour temperature range of 2700K ~ 10000K. Brightness range of 0% ~ 100% and a green/magenta range of -1 ~ +1.
Mode Selection HSI Mode The adjustable parameters of the HSI mode are: HSI range 0° ~ 360°, saturation range 0% ~100% and brightness 0% ~100%.
Mode Selection Special Effects Mode There are in excess of 18 special effects including: fireworks, SOS, rainbow, lightening, TV light emission, pulsating light, emergency vehicle, firelight, nightclub or party, strobe light, welding light, flickering candlelight, intermittent light bulb, light through clouds and explosion. Brightness ranges from 0% - 100%.
Mode Selection Language selection To select and set language, access settings on the interface display, press the SET key for your language and press the SET key to confirm. Firmware Version Number Device ID Number Overheating protection If the product temperature is too high during use or whilst charging 'Overheating Protection' will appear on the display and screen brightness will be reduced.
Bluetooth Introduction Bluetooth Connection and Reset 1. For Bluetooth connection: download the iFootage Lumin App to your mobile device (Smartphone or tablet). Once registered, open the Lumin App and create a new project. Open the project and search for devices, select the appropriate device using the device name or code to connect via Bluetooth. The light will blink three times to show a successful Bluetooth connection. Via the project device list, select to control single or multiple devices.
APP Introduction Lumin App Overview 1. The Lumin App has multi-light control, keyframes and music mode. For additional modes please download the iFootage Lumin App or visit www.ifootagegear.com to access a detailed App user guide. To download the APP, please scan the QR code or search for iFootage Lumin App. For more information please visit www.ifootagegear.com Note: First-time connected mobile devices (Smartphones or tablets) can, after registering, immediately use the App to operate the product.
APP Introduction Multi-light Control Within the App's project device list, you can choose to add multiple lights to a project. By setting key frames on each light you can create a multiple light sequence. Example. Project 1: (A1 - A4) Four lights have been added to the project and each has been set to different key frames. These have been set and recorded so that this can be stored and used as a playable lighting effect. Example.
LIST OF ITEMS HL1 C4 Soft Cover Warranty Card Power cable Cold Shoe Holder Manual Certificate PRODUCT PARAMETERS Model HL1 C4 Handy Light Product name 2700K~10000K HSI Range 0°~360° 0%~100% Brightness 0%~100% Green/Magenta -1~+1 Bluetooth BLE5.
Notes 1. In order to avoid equipment failure, please do not expose this product to moisture or use in wet or rainy, sandy or dusty environments. 2. Do not disassemble or modify the product. Mishandling, including dropping the product, may result in permanent damage. 3. Keep the product and its parts out of the reach of children and animals. 4. Please ensure that the product is always free from moisture and is stored safely.
Maintenance 1. To prevent the accumulation of dust particles affecting the performance of the product, please carefully wipe the exterior of the product with a clean, soft, dry cloth at regular intervals. 2. The HL1 C4 Handy Light has a 1 year warranty from the date of original purchase. This applies to the unit and accessories. The battery has a 180 day warranty from the date of original purchase. 3.
FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC statement - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
20
Statement iFootage reserve the right to amend or rectify all hardware and software specifications at any time without notice. If there appears to be any difference between the contents of the instruction manual and the actual product, please refer to the product itself. iFootage and its associates will not be held responsible for the use or misuse of any of the iFootage products or any direct, indirect, punitive, incidental, special consequential property or life damage responsibility.
