80291664/00 06/2020 Operating instructions Gateway ZB0929 UK
1 Preliminary note Technical data, approvals, accessories and further information at www.ifm.com. 2 Safety instructions • Read this document before setting up the product and keep it during the entire service life. • The product must be suitable for the corresponding applications and environmental conditions without any restrictions. • Only use the product for its intended purpose (→ Functions and features).
2.1 Symbols used ► > → Instruction Reaction, result Cross-reference Important note Non-compliance may result in malfunction or interference. Information Supplementary note. UK 3 Functions and features • The gateway transmits sensor data to the back-end system. In the backend system, the sensor data is made available to carry out analyses and evaluations and to create alarm rules.
5 Operating and display elements 1 2 3 4 5 LED 1: 2: 3: 4: 5: USB connection Mains connection Ethernet connection Micro-SIM card slot Configuration button 6 Electrical connection ► Connect the device with the supplied power supply. 7 Set-up The unit switches on automatically when connected to the power supply.
LED Colour Status Meaning green on Device is connected to the Internet. blue on Wireless connection to the Internet is being established. flashes The device is in local configuration mode. on Device fault ► Open configuration mode and examine the malfunction. red UK 7.1 Connect to the Internet A connection via Ethernet or mobile radio automatically disables the wireless LAN connection. 7.1.1 Ethernet connection Use the RJ45 socket for Ethernet connection.
► Connect PC, smartphone etc. to the wireless LAN access point. The name of the wireless LAN access point is "ifmgw-serial number". ► Enter the password. While the gateway is establishing a radio connection (LED lights up blue), the configuration mode cannot be started. Windows 10 may ask for a PIN code as primary access point password. Use the option 'password'. ► Open the browser on the PC, smartphone, etc. ► Open the address 192.168.0.1:3001 in the browser. ► Make the necessary configurations (e.g.
9 Radio approvals If approvals are granted, the approval texts of the respective countries shall apply. 9.1 Overview Frequency ranges and transmission power Radio technology Frequency bands max. transmission power LTE Cat. M1 B2, B3, B4, B5, B8, B20 + 23 dBm LTE NB-IoT B2, B3, B4, B5, B8, B20 + 23 dBm 2G GPRS/EGPRS B3 + 33 dBm 2G GPRS/EGPRS B8 + 30 dBm WLAN (2.4 GHz) 2.4 GHz ISM + 17.3 dBm 2.4 GHz ISM (Proprietär) 2.
Information to the user: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
