Installation Instructions RF identification system Read/write head 80233226 / 00 11 / 2015 ANT515 ANT516 UK
Content 1 Preliminary note ���������������������������������������������������������������������������������������������������4 1.1 Symbols used �����������������������������������������������������������������������������������������������4 2 Safety instructions �����������������������������������������������������������������������������������������������4 2.1 General ���������������������������������������������������������������������������������������������������������4 2.
12.1 Radio approvals ����������������������������������������������������������������������������������������13 12.1.1 Overview �������������������������������������������������������������������������������������������13 12.1.2 Europe ����������������������������������������������������������������������������������������������13 12.1.3 USA ��������������������������������������������������������������������������������������������������13 12.1.
1 Preliminary note This document is part of the device and contains information about the correct handling of the product. This document is intended for specialists. These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device. Read this document before use to familiarise yourself with operating conditions, installation and operation.
2.2 Radio equipment In general, radio equipment must not be used in the vicinity of petrol stations, fuel depots, chemical plants or blasting operations. ►► Do not transport and store any flammable gases, liquids or explosive substances near the unit. 2.3 Interference of electronic and medical devices Operation can affect the function of electronic devices that are not correctly shielded. ►► Disconnect the device in the vicinity of medical equipment.
4.2 Overview Art. no.: Function: Type designation: Operating frequency: Type: ANT515 / ANT516 Read/write head DTRHF KQRWIDUS03 13,56 MHz Rectangular 5 Installation 5.1 General installation instructions When mounting several read/write heads adhere to the minimum distances between the systems. Flush mounting of a read/write head in metal reduces the read/write distance.
5.3 Avoiding interference The device generates a modulated electrical field with a frequency of 13.56 MHz. To avoid interference of the data communication no other devices generating interference emission in this frequency band must be operated in the vicinity. Such devices are for example frequency converters and switched-mode power supplies. 5.4 Mechanical design UK 1 1: Sensing face 5.
Figure B ►► Fasten the device to the adapter using the supplied screws (3). Figure C ►► Fasten the mounting adapter including the inserted device to the tank at the desired height using suitable screws (4). The device can be inserted into the mounting adapter E12153 in both directions. 5.6 Installation on bypass pipes with mounting adapter The mounting adapter is available as accessory (order no. E12163). ►► Fasten the device to the bypass at the desired height using common plastic cable ties.
5.7 Installation without mounting adapter UK ►► Fasten the device at the intended installation location using suitable screws or suitable glue. ►► Align the cut-outs as shown. 5.
5.9 Positioning of the ID tags D ►► Align the ID tag on the antenna central axis ID tag Type E80371 Distance read/write head (D) metal plastics 32 mm 34 mm All indications apply to static read/write operations. 6 Electrical connection 6.1 Wiring ►► Connect the device to the evaluation unit DTE10x using the M12 connection. Voltage is supplied via the evaluation unit. 1 3 4 1 4 3 L+ DATA L A selection of sockets is available on our website at: www.ifm.com → Data sheet search → e.g.
6.2 UL approval For units with cULus approval and the scope of validity cULus: ►► Supply the device from an isolating transformer having a secondary UL- listed fuse rated a) 5 A at voltages of 0...20 Vrms (0...28.3 Vp) b) 100/Vp at voltages of 20...30 Vrms (28.3...42.
8 Operation The read/write head is configured via the connected evaluation unit DTE10x. You can find more information about the operation in the manual: www.ifm.com → Data sheet search → e.g. DTE100 → Operating instructions 9 Dimensions 9.1 Bore hole dimensions of the mounting adapter 3,2 4,2 15 28 36 2,9 3,2 57 13 24 9.2 Bore hole dimensions of the device 10 Technical data The data sheets are available on our website at: www.ifm.com → Data sheet search → e.g.
11 Maintenance, repair, disposal The operation of the unit is maintenance-free. For perfect functioning: Keep the sensing face and a clear space, if any, free from deposits and foreign bodies. When replacing the device ensure that installation is done in the same way and that the same type of unit is used. It is not possible to repair the unit. After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations. 12 Approvals/standards UK 12.
12.1.4 Canada Notices IC: This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: 1. the device may not cause interference, and 2. the user of the device must accept any interference received, including interference that may cause undesired operation. 12.1.
UK 15