Installation Instructions RF identification system Read/write head 80223010 / 00 09 / 2014 ANT430 ANT431 UK
Contents 1 Preliminary note ...................................................................................................4 1.1 Symbols used ...............................................................................................4 2 Safety instructions ...............................................................................................4 2.1 General .........................................................................................................4 2.2 Radio equipment ...........
11 Maintenance, repair and disposal ....................................................................13 12 Approvals/standards ........................................................................................13 12.1 Radio approvals........................................................................................13 12.1.1 Overview...........................................................................................13 12.1.2 Europe .........................................................
1 Preliminary note This document is part of the device and contains information about the correct handling of the product. This document is intended for specialists. These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device. Read this document before use to familiarise yourself with operating conditions, installation and operation.
2.2 Radio equipment In general, radio equipment must not be used in the vicinity of petrol stations, fuel depots, chemical plants or blasting operations. ► Do not transport and store any flammable gases, liquids or explosive substances near the unit. 2.3 Interference of electronic and medical devices Operation can affect the function of electronic devices that are not correctly shielded. ► Disconnect the device in the vicinity of medical equipment.
4.2 Overview Art. no.: Function: Type designation: Operating frequency: Type: ANT430 Read/write head DTRHF IBRWIDUS03 13.56 MHz M30, flush mountable Art. no.: Function: Type designation: Operating frequency: Type: ANT431 Read/write head DTRHF INRWIDUS03 13.56 MHz M30, non-flush mountable 5 Installation 5.1 General installation instructions When mounting several read/write heads adhere to the minimum distances between the systems.
The best way to position the available ID tags and on mounting in metal is available on our website: www.ifm.com → Data sheet search → e.g. ANT430 → More information (General information about mounting and operation) 5.3 Avoiding interference The device generates a modulated electrical field with a frequency of 13.56 MHz. To avoid interference of the data communication no other devices generating interference emission in this frequency band must be operated in the vicinity.
5.6 Mounting distances 5.6.1 ANT430 Operating mode For reading and writing Distance side (A) ≥ 50 mm Distance front (B) ≥ 100 mm Distance side (A) ≥ 120 mm Distance front (B) ≥ 160 mm 5.6.
5.7 Positioning of the ID tags 5.7.1 ANT430 D UK ► Align the ID tag on the antenna central axis. ID tag Distance read/write head (D) metal plastics Type E80370 20 mm 20 mm E80371 25 mm 30 mm All indications apply to static read/write operations. 5.7.2 ANT431 D ► Align the ID tag on the antenna central axis. ID tag Type Distance read/write head (D) metal plastics E80370 35 mm 35 mm E80371 45 mm 45 mm All indications apply to static read/write operations.
6 Electrical connection 6.1 Wiring ► Connect the device to the evaluation unit DTE10x using the M12 connection. Voltage is supplied via the evaluation unit. 1 1 4 3 4 3 L+ DATA L A selection of sockets is available on our website at: www.ifm.com → Data sheet search → e.g. ANT430 → Accessories Cables with the following characteristics are suitable for the connection: Length < 20 m Ohmic resistance (feed + return line) max. 3Ω Effective cable capacity max. 3 nF 6.
7 Display elements ANT430 ANT431 LED LED UK LED green: operating voltage LED yellow: ID tag LED Green Yellow Green + yellow Status ON OFF FLASHING SLOWLY ON (permanently) ON (pulse) FLASHING QUICKLY OFF FLASHING ALTERNATELY Description Operating voltage OK Operating voltage missing Deactivated ID tag detected ID tag read/written successfully Error when reading/writing on ID tag No ID tag in the field or faulty ID tag in the field or invalid ID tag in the field error in communication or device faul
9 Dimensions 9.1 ANT430 50 39 37 29 M12 x1 M30x1,5 1,5 5 36 9.2 ANT431 M12 x1 M30x1,5 50 39 37 15 18 5 10 Technical data The data sheets are available on our website at: www.ifm.com → Data sheet search → e.g.
11 Maintenance, repair and disposal ► Do not open the housing as the device does not contain any components which must be maintained by the user. The device must only be repaired by the manufacturer. ► Dispose of the device in accordance with the national environmental regulations. 12 Approvals/standards UK 12.1 Radio approvals 12.1.1 Overview The overview of the approval status of a unit is available on our website at: www.ifm.com → Data sheet search → e.g. ANT430 → More information 12.1.
12.1.4 Canada Notices IC: This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: 1. the device may not cause interference, and 2. the user of the device must accept any interference received, including interference that may cause undesired operation. 12.1.
UK 15
