MODAT-200 IEI Technology Corp. MODEL: MODAT-200 HANDHELD COMPUTER, Quick Registration, Inspection, On-line Sales User Manual Page 1 Rev. 1.
MODAT-200 Revision Date Version Changes 28 December, 2010 1.
MODAT-200 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
MODAT-200 WARNING: NOTE: This equipment been tested andfound found to to comply thethe limits for afor Class A digital This equipment has has been tested and complywith with limits a Class A device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable digital device, to Part 15when of thethe FCC Rules.is These are designed to protection againstpursuant harmful interference equipment operatedlimits in a commercial environment.
MODAT-200 Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURE .................................................................................................................... 2 1.3 APPLICATIONS ...................................................................................
MODAT-200 ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY .......................................
MODAT-200 List of Figures Figure 1-1: MODAT-200 ..................................................................................................................2 Figure 1-2: MODAT-200 Front Panel .............................................................................................4 Figure 1-3: MODAT-200 Left Panel................................................................................................5 Figure 1-4: MODAT-200 Top Panel.........................................................
MODAT-200 List of Tables Table 1-1: MODAT-200 System Specifications ............................................................................8 Table 2-1: Packing List .................................................................................................................
MODAT-200 Chapter 1 1 Introduction Page 1
MODAT-200 1.1 Overview Figure 1-1: MODAT-200 The MODAT-200, built-in Windows Mobile 6.5, offers real-time information for staff to provide their guests with better, faster service and more information. The MODAT-200 links the staff to real-time, online data to serve customers with better, faster service through Wi-Fi and connected Bluetooth devices such as headsets and thermal printers. A built-in vibrator can alert the wait staff that an order is ready to be served. 1.
MODAT-200 Bluetooth 2.0 + EDR IP 54 compliant Windows Mobile 6.5 preinstalled Support Visual Studio .NET and .NET Compact Framework development tools Mobile application downloads: Windows Marketplace for Mobile (http://www.windowsmarketplace.com) 1.3 Applications The MODAT-200 can be applied in the following places: Table service Quick registration Inspection On-line sales 1.4 External Overview The MODAT-200 combines its features in a stylish enclosure.
MODAT-200 1.4.1 Front Panel The front panel of the MODAT-200 is shown below. Figure 1-2: MODAT-200 Front Panel 1 x Speaker 1 x Wi-Fi/Bluetooth status LED 1 x Battery status LED 4 x Touch keys The two LEDs on the front panel indicate Wi-Fi, Bluetooth, battery and message status as described below.
MODAT-200 1.4.2 Left Panel The left panel of the MODAT-200 is shown below. Figure 1-3: MODAT-200 Left Panel 1 x Scrolling key 1 x MicroSD card slot 1 x Reset button 1.4.3 Top Panel The top panel of the MODAT-200 has a power button as shown in Figure 1-4.
MODAT-200 1.4.4 Bottom Panel The bottom panel of the MODAT-200 is shown below. Figure 1-5: MODAT-200 Bottom Panel 1 x Earphone connector 1 x Mini USB connector 1 x Power charging cradle connector 1.4.5 Rear Panel The rear panel of the MODAT-200 is shown below.
MODAT-200 1.5 Specifications The technical specifications for the MODAT-200 systems are listed in Table 1-1. Specification MODAT-200 Microprocessor Samsung 6410 ARM11 667 MHz OS Windows Mobile 6.5 Memory 128 MB SDRAM 128 MB NAND Flash Display Communication 3.5” (89mm) TFT LCD QVGA (240 x 320) 64 K color LED backlight Resistive touchscreen Wi-Fi 802.11 b/g Bluetooth 2.
MODAT-200 Specification MODAT-200 Temperature Operating: -10C ~ +50C Storage: -20C ~ +70C Humidity 5%~95%, non-condensing Drop Survival 1.2 m Protection IP 54 Electrostatic Discharge +/- 15 kVdc air discharge +/- 8 kVdc contact discharge Dimensions (LxWxD) 125 mm x 174 mm x 18.
MODAT-200 1.
MODAT-200 Chapter 2 2 Installation Page 10
MODAT-200 The installation steps below should be followed in order. Step 1: Unpack the device Step 2: Check all parts are included Step 3: Charge the MODAT-200. Step 4: Power up the systemS tep 0: 2.1 Unpack the Device WARNING! Only remove the protective plastic cover stuck to the front screen after installation. The plastic layer protects the screen surface during installation process. To unpack the MODAT-200, follow these steps: Step 1: Cut the sealing tape. Only cut deep enough cut the tape.
MODAT-200 2.2 Packing List The MODAT-200 is shipped with the following components: Quantity Item 1 MODAT-200 1 USB cable 1 AC-DC Adapter 90 V~264 V AC input 5 V DC output, 1 A (max.
MODAT-200 Quantity Item 1 Hand strap 1 Charging cradle (optional) Image (P/N: Modat-200-CR1-R10) Table 2-1: Packing List 2.3 Charging the System To start using the MODAT-200, the user must charge the MODAT-200 by the power adapter. To charge the MODAT-200, please follow the steps below. Step 1: Connect the mini-USB plug of the USB cable to the mini-USB connector on the bottom panel of the MODAT-200.
MODAT-200 Figure 2-2: Power Adapter USB Connector Step 3: The battery LED lights up in orange and indicates the battery is being charged. When the battery is fully charged, the battery LED will turn off. Step 0: Figure 2-3: Battery LED 2.3.1 Using Cradle To charge the MODAT-200 using the optional charging cradle, follow the steps below. Step 1: Connect the mini-USB plug of the USB cable to the mini-USB connector on the rear side of the charging cradle.
MODAT-200 Figure 2-4: Mini-USB Connector of the Cradle Step 2: Connect the USB cable to the USB connector of the power adapter. Then, plug the power adapter to a power source. Or connect the USB cable to the USB connector of a computer. Figure 2-5: Power Adapter USB Connector Step 3: Place the MODAT-200 on the cradle and start charging the battery.
MODAT-200 2.4 Power-On/Off Procedure To power-on/off the MODAT-200 please follow the steps below: Power-On: Push the power button until the screen shows up. Figure 2-7: Power Button Power-Off: Push the power button for around 6 seconds until the screen shuts off.
MODAT-200 Appendix A A Safety Precautions Page 17
MODAT-200 WARNING: The built-in 1880mAh Li-ion battery of the MODAT-200 is a non-swappable battery. The user can not open the back cover and remove the battery. WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the MODAT-200. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.
MODAT-200 DO NOT: o o o o Drop the MODAT-200 against a hard surface. Strike or exert excessive force onto the LCD panel. Touch any of the LCD panels with a sharp object In a site where the ambient temperature exceeds the rated temperature A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the MODAT-200 may result in permanent damage to the MODAT-200 and severe injury to the user.
MODAT-200 A.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by and incorrect type. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
MODAT-200 The interior of the MODAT-200 does not require cleaning. Keep fluids away from the MODAT-200 interior. Be cautious of all small removable components when vacuuming the MODAT-200. Turn the MODAT-200 off before cleaning the MODAT-200. Never drop any objects or liquids through the openings of the MODAT-200. Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning the MODAT-200.
MODAT-200 Appendix B B Hazardous Materials Disclosure Page 22
MODAT-200 B.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
MODAT-200 Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalen Polybrominated Polybrominated (Pb) (Hg) (Cd) t Biphenyls Diphenyl Chromium (PBB) Ethers (CR(VI)) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or hazardous subs
MODAT-200 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害