IOVU-430M Panel PC 四 Nt IEI Technology Corp. MODEL: IOVU-430M Panel PC, 4.3" Touch Screen, 416 MHz Marvell XScale PXA270, Fast Ethernet, USB, Mini SD, CAN bus, RS-232/422/485 RoHS Compliant, Front Panel IP 65 Protection User Manual Page i Rev. 1.
IOVU-430M Panel PC Revision Date Version Changes 17 September, 2010 1.
IOVU-430M Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IOVU-430M Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 BENEFITS ................................................................................................................... 2 1.3 FEATURES ..............................................................................
IOVU-430M Panel PC 3.5 SOFTWARE ................................................................................................................ 23 3.5.1 Wireless AP ...................................................................................................... 23 A CERTIFICATIONS .................................................................................................... 26 A.1 ROHS COMPLIANT ..................................................................................................
IOVU-430M Panel PC List of Figures Figure 1-1: IOVU-430M ..............................................................................................................2 Figure 1-2: Front Panel .............................................................................................................3 Figure 1-3: IOVU-430M Peripheral Connectors ........................................................................4 Figure 1-4: IOVU-430M Physical Dimensions (millimeters) .................................
IOVU-430M Panel PC List of Tables Table 1-1: IOVU-430M Specifications .......................................................................................6 Table 1-2: Technical Specifications..........................................................................................8 Table 2-1: Package List Contents ........................................................................................... 11 Table 3-1: External Interface Connectors.........................................................
IOVU-430M Panel PC Chapter 1 1 Introduction Page 1
IOVU-430M Panel PC 1.1 Overview Figure 1-1: IOVU-430M The IOVU-430M Panel PC comes with a 4.3" touch panel screen. It is powered by a 416 MHz Marvell XScale PXA270 processor and has 128 MB of SDRAM. The IOVU-430M includes a Mini SD card with Windows CE 5.0 installed. The package also includes a software development kit and documentation to help easily customize the operating system according to needs. The IOVU-430M is an extremely low power Panel PC.
IOVU-430M Panel PC Can handle tough environments because of solid-state storage and IP64 protection of the front cover 1.3 Features The IOVU-430M features are listed below: 416 MHz Marvell XScale PXA270 processor 128 MB of SDRAM One Fast Ethernet port One USB 1.1 port One RS-232/422/485 serial communication connection One GPIO and CAN bus connection Projected capacitor multi-touch panel or 4-wire resistive single-touch panel 12-36 VDC input RoHS compliant 1.
IOVU-430M Panel PC 1.5 Connector Panel The external peripheral interface connectors are located on the bottom and side panels of the IOVU-430M . The peripheral interface connectors are shown in Figure 1-3. Figure 1-3: IOVU-430M Peripheral Connectors External peripheral interface connectors on the IOVU-430M include: Page 4 1 x CAN bus connector 1 x DC-IN terminal block 1 x GPIO connector 1 x RJ-45 LAN connector 1 x RS-232/422/485 connector 1 x mini SD card slot 1 x USB 1.
IOVU-430M Panel PC 1.
IOVU-430M Panel PC 1.7 Power Supply and Battery WARNING: Whenever you need to remove a part for maintenance or upgrading, switch off the power supply and unplug the power cord first. And Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions The IOVU-430M has a terminal block connector on the bottom panel. 1.8 Model Variations The IOVU-430M is available in the following model variations. Model No.
IOVU-430M Panel PC Specifications Real-time Clock Battery backup RTC Watchdog Timer Software programmable supports 1~255 sec. system reset Display Display Type TFT LCD screen Display Size 4.3" Resolution 480 x 272, 262,000 colors Video Support MPEG1 Brightness 400 cd/m Backlight MTBF 10,000 hrs Pixel Pitch (mm) 0.066(H) x 0.
IOVU-430M Panel PC Specifications Operating Random Vibration Mode (MIL-STD-810F 514.5C-3) 1.Axes: 3 axes (Vertical / Transverse / Longitudinal). Vibration 2.10-500 Hz, 60min/axis. 3.Equivalent to Z:2.18 Grms X:1.6 Grms Y:1.96 Grms Front Panel Color Pantone Black C Physical Dimensions 145 mm x 104 mm x 34 mm Net Weight 0.7 kg Ingress Protection IP 65 compliant front panel Table 1-2: Technical Specifications 1.
IOVU-430M Panel PC Chapter 2 2 Unpacking Page 9
IOVU-430M Panel PC 2.1 Anti-static Precautions WARNING: Failure to take ESD precautions during installation may result in permanent damage to the IOVU-430M and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-430M. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IOVU-430M or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
IOVU-430M Panel PC 2.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the IOVU-430M from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw.
IOVU-430M Panel PC Chapter 3 3 Installation Page 12
IOVU-430M Panel PC 3.1 Installation Precautions During installation, be aware of the precautions below: Read the user manual: The user manual provides a complete description of the IOVU-430M, installation instructions and configuration options. DANGER! Disconnect Power: Power to the IOVU-430M must be disconnected during the installation process, or before any attempt is made to access the rear panel.
IOVU-430M Panel PC 3.3 External Peripheral Interface Connectors Table 3-1 lists the external interface connectors on the IOVU-430M. Detailed descriptions of the connectors can be found following the table.
IOVU-430M Panel PC 3.3.1 12 V~36 V DC Terminal Block The power terminal block connects to a 12 V~36 V DC power source. CN Label: 12-36 V CN Type: Terminal block CN Location: See Figure 3-2 CN Pinouts: See Table 3-2 and Figure 3-3 Pin Description 1 12~36 V DC Power in 2 GND Table 3-2: 12~36 V Power Connector Pinouts Figure 3-3: Power Terminal Block 3.3.2 GPIO and CAN bus Connector The IOVU-430M has a GPIO (pins 1-7) and CAN bus connector (pins 8-10).
IOVU-430M Panel PC Pin Description 1 GND 2 GPIO1(95) 3 GPIO2(96) 4 GPIO3(97) 5 GPIO4(98) 6 GPIO5(99) 7 GPIO6(100) 8 CAND-/CAN_L 9 CAND+/CAN_H 10 GND Table 3-3: GPIO and CAN Bus Connector Pinouts Figure 3-4: GPIO and CAN Bus Terminal Block 3.3.3 RS-232/422/485 Serial Port This section outlines the usage and setup of the serial port on the bottom I/O panel. 3.3.3.
IOVU-430M Panel PC Figure 3-5: Serial Device Connector Step 2: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 3.3.3.2 RS-232/422/485 Selection To select RS-232/422/485 mode, please follow the directions below. Step 1: Find and start the IEI CE_UTILITY.
IOVU-430M Panel PC Step 2: Select COM1 mode setting. Select the desired mode setting for Serial Port COM1 in the drop down menu (Figure 3-6). RS-232 RS-422 RS-485 Step 3: Click the Set button. Click the Set button to apply the mode setting change. Step 4: Click the Save Registry button. Click the Save Registry button to save the settings. Step 0: 3.3.3.3 Pinouts Pinouts for the RS-232/422/485 serial port is shown below.
IOVU-430M Panel PC 3.3.4 USB Connector The external USB Series "A" receptacle connector provides easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IOVU-430M. Step 1: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into the USB Series "A" receptacle on the external peripheral interface. See Figure 3-8. Step 0: Figure 3-8: USB Connector USB devices connect directly to the USB connector on the external peripheral connector panel.
IOVU-430M Panel PC Step 1: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the IOVU-430M. See Figure 3-9. Figure 3-9: LAN Connection Step 2: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector. Step 0: The Ethernet connector pinouts are shown below.
IOVU-430M Panel PC Figure 3-10: Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked (Table 3-7). SPEED LED LINK LED Status Description Status Description GREEN ON: 100 MB YELLOW ON: Linked OFF: 10 MB Flashing: Activity Table 3-7: Ethernet Connector LEDs 3.
IOVU-430M Panel PC 3.4.1 In Wall Cage The IOVU-430M has not Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. So we provide In wall cage to fix this panel, please follow the steps below. Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the monitor stand mounting plate. Step 2: Secure the monitor to the stand with the supplied retention screws (Figure 3-11).
IOVU-430M Panel PC 3.5 Software The IOVU-430M comes with a pre-installed Windows CE 5.0 or Linux 2.6.x operating system and a rich software application development kit. For information about configuring the operating system, adding remote management tools or additional software and drivers, refer to the user manuals on IEI IOVU Utility CD that came with the IOVU-430M. The IOVU includes the following software: Standard Windows® CE5.0 professional version license.
IOVU-430M Panel PC Figure 3-12: Wireless AP Step 2: Select your Internet connection and click Connect. Step 3: The Wireless Network Properties screen appears next. (Figure 3-113).
IOVU-430M Panel PC Step 4: You must input the password into the Network key. Click OK. The soft AP configuration is finished. (Figure 3-114). Figure 3-14: Wireless AP Connected Step 5: Click the IP Information button to view the information of the Wireless AP Solo. If the server function is enabled on the AP. You can automatically get the IP address, subnet mask.
IOVU-430M Panel PC Appendix A A Certifications Page 26
IOVU-430M Panel PC A.1 RoHS Compliant All models in the IOVU series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial workstations and the workstation itself are RoHS compliant.
IOVU-430M Panel PC Appendix B B Safety Precautions Page 28
IOVU-430M Panel PC B.1 Safety Precautions WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the IOVU-430M. Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
IOVU-430M Panel PC B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IOVU-430M may result in permanent damage to the IOVU-430M and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-430M. Dry climates are especially susceptible to ESD.
IOVU-430M Panel PC The interior of the IOVU-430M does not require cleaning. Keep fluids away from the IOVU-430M interior. Be cautious of all small removable components when vacuuming the IOVU-430M. Turn the IOVU-430M off before cleaning the IOVU-430M. Never drop any objects or liquids through the openings of the IOVU-430M. Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning the IOVU-430M.
IOVU-430M Panel PC B.3 FCC Precautions WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IOVU-430M Panel PC Appendix C C Hazardous Materials Disclosure Page 33
IOVU-430M Panel PC C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
IOVU-430M Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or hazardou
IOVU-430M Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X