IOVU-210AD-RK39 Panel PC MODEL: IOVU-210AD-RK39 10.1" RISC-Based Panel PC with Touchscreen, Rockchip RK3399 On-board SoC, Wi-Fi, Bluetooth, RFID, Digital I/O, PoE, COM, USB, Android 7.1, RoHS Compliant User Manual Page i Rev. 1.
IOVU-210AD-RK39 Panel PC Revision Date Version Changes June 4, 2021 1.10 Updated for R11 version October 8, 2018 1.
IOVU-210AD-RK39 Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IOVU-210AD-RK39 Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes.
IOVU-210AD-RK39 Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURES ................................................................................................................... 2 1.3 FRONT PANEL .....................................................................
IOVU-210AD-RK39 Panel PC 4 ANDROID OS .............................................................................................................. 28 4.1 HOME SCREEN ......................................................................................................... 29 4.1.1 Adding a Home Screen ..................................................................................... 29 4.1.2 Switching between Home Screens .................................................................... 30 4.1.
IOVU-210AD-RK39 Panel PC List of Figures Figure 1-1: IOVU-210AD-RK39 Panel PC ......................................................................................2 Figure 1-2: Front Panel ..................................................................................................................3 Figure 1-3: LED Indicators .............................................................................................................3 Figure 1-4: Bottom Panel ..........................................
IOVU-210AD-RK39 Panel PC List of Tables Table 1-1: Technical Specifications ..............................................................................................7 Table 2-1: Packing List .................................................................................................................10 Table 2-2: Optional Items .............................................................................................................11 Table 3-1: Power Terminal Block Pinouts .....................
IOVU-210AD-RK39 Panel PC Chapter 1 1 Introduction Page 1
IOVU-210AD-RK39 Panel PC 1.1 Overview Figure 1-1: IOVU-210AD-RK39 Panel PC The IOVU-210AD-RK39 is a 10.1" RISC-based panel PC with Android 7.1 OS. At the heart of the system is the Rockchip RK3399 on-board SoC, offering low power in a powerful package. The IOVU-210AD-RK39 provides rich input capabilities utilizing the projected capacitive touchscreen. Other peripherals include RFID reader, 4-bit digital I/O, two USB 2.0 ports, one USB 3.
IOVU-210AD-RK39 Panel PC 1.3 Front Panel The front panel of the IOVU-210AD-RK39 contains a 10.1" LCD with projected capacitive touchscreen, 5-megapixel camera, digital microphones and the RFID reader. Figure 1-2: Front Panel The LED indicators on the front panel show the status of power, Bluetooth and Wi-Fi connection. Figure 1-3: LED Indicators Power LED Bluetooth LED Wi-Fi LED Off The system is turned off. Blue The system is turned on. Off Bluetooth is disabled. Blue Bluetooth is enabled.
IOVU-210AD-RK39 Panel PC 1.4 Bottom Panel The bottom panel contains the I/O interfaces as shown in Figure 1-4. Figure 1-4: Bottom Panel 1.5 Rear Panel The rear panel has four VESA 75 mounting screw holes.
IOVU-210AD-RK39 Panel PC 1.6 Side Panels The left panel has a 2 W speaker, and the right panel has a terminal block for 4-bit digital input and output.
IOVU-210AD-RK39 Panel PC 1.7 System Specifications The IOVU-210AD-RK39 technical specifications are listed below. System CPU Rockchip RK3399 on-board SoC (dual-core Cortex-A72 + quad-core Cortex-A53, 64-bit) Memory 2 GB 1866 MHz LPDDR3L on-board memory Storage 16 GB eMMC NAND flash One microSD card slot (internal) Audio 1 x Speaker (2 W) 2 x Digital microphone Camera 5-megapixel front-facing camera Thermal Solution Fanless Watchdog Timer Yes Real-time Clock Battery backup RTC OS Android 7.
IOVU-210AD-RK39 Panel PC Physical Character Construction Material PC+ABS plastic front cover and metal rear cover Color White Mounting VESA 75 mm x 75 mm Dimensions (W x H x D) 293 mm x 209.5 mm x 44.5 mm Operation Temperature -10°C ~ 50°C with air flow Storage Temperature -20°C ~ 60°C Humidity 10% ~ 95%, non-condensing Weight (Net) 1.84 kg Certifications CE, FCC Class A Connectors, Buttons and Indicators I/O Connector 1 x USB 3.2 Gen 1 (5Gb/s) Type-A port 2 x USB 2.
IOVU-210AD-RK39 Panel PC 1.8 Dimensions The dimensions are shown below.
IOVU-210AD-RK39 Panel PC Chapter 2 2 Unpacking Page 9
IOVU-210AD-RK39 Panel PC To unpack the panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the system has been properly installed. This ensures the screen is protected during the installation process. Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape. Step 2: Open the box. Step 3: Lift the IOVU-210AD-RK39 out of the box.
IOVU-210AD-RK39 Panel PC 2.
IOVU-210AD-RK39 Panel PC Chapter 3 3 Installation Page 12
IOVU-210AD-RK39 Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the IOVU-210AD-RK39 may result in permanent damage to the IOVU-210AD-RK39 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-210AD-RK39. Dry climates are especially susceptible to ESD.
IOVU-210AD-RK39 Panel PC 3.2 Installation Precautions CAUTION: The IOVU-210AD-RK39 series has more than one power supply connection point. To reduce the risk of electric shock, disconnect all power sources before installing or servicing the IOVU-210AD-RK39 series. NOTE: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IOVU-210AD-RK39 Panel PC 3.3 External I/O Connectors This section provides an overview of the external I/O connectors of the IOVU-210AD-RK39. 3.3.1 Power Input Interfaces The IOVU-210AD-RK39 supports 9 V ~ 30 V DC power input and provides two kinds of power input interfaces (Figure 3-1). Figure 3-1: Power Input Interfaces The pinouts for the power terminal block are listed in the figure and table below.
IOVU-210AD-RK39 Panel PC 3.3.2 Ethernet Connector There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to an external network and supports PoE. The Ethernet connector pinouts are shown below. Pin Description 1 LAN1_MDX0+ 2 LAN1_MDX0- 3 LAN1_MDX1+ 4 LAN1_MDIX2+ 5 LAN1_MDX2- 6 LAN1_MDX1- 7 LAN1_MDIX3+ 8 LAN1_MDX3- Table 3-2: Ethernet Connector Pinouts The RJ-45 Ethernet connector has two status LEDs, one green and one yellow.
IOVU-210AD-RK39 Panel PC 3.3.3 Serial Interfaces The system has an RS-232 and an RS-232/422/485 serial port connector. Pinouts of the two connectors are shown in the following two tables.
IOVU-210AD-RK39 Panel PC 3.3.4 Digital I/O Connector The digital I/O connector on the system side panel provides 4-bit input/output connection. Pinouts of the digital I/O connector are shown in the following figure. Figure 3-4: Digital I/O Connector Pinouts 3.3.5 USB 2.0 Host Connectors The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Figure 3-5: USB 2.
IOVU-210AD-RK39 Panel PC 3.4 Mounting the System WARNING! When mounting the panel PC, it is better to have more than one person to help with the installation to make sure the panel PC does not fall down and get damaged. Four methods of mounting the IOVU-210AD-RK39 are listed below. Wall mounting Arm mounting Stand mounting The four mounting methods are described below. 3.4.1 Wall Mounting To mount the IOVU-210AD-RK39 onto the wall, please follow the steps below.
IOVU-210AD-RK39 Panel PC Step 5: Secure the mounting-bracket to the wall by inserting four retention screws (M4*8) into the four pilot holes and tightening them (Figure 3-6). Figure 3-6: Wall-mounting Bracket Step 6: Insert the four monitor mounting screws (M4*6) provided in the wall mounting kit into the four screw holes on the real panel of the IOVU-210AD-RK39 and tighten until the screw shank is secured against the rear panel (Figure 3-7).
IOVU-210AD-RK39 Panel PC NOTE: In the diagram below the bracket is already installed on the wall. Figure 3-7: Chassis Support Screws Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting bracket (Figure 3-8).
IOVU-210AD-RK39 Panel PC Figure 3-8: Securing the IOVU-210AD-RK39 3.4.2 Arm Mounting The IOVU-210AD-RK39 is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75 mm interface pad. To mount the IOVU-210AD-RK39 on an arm, please follow the steps below. Step 1: The arm is a separately purchased item. Please correctly mount the arm onto the surface it uses as a base. To do this, refer to the installation documentation that came with the mounting arm.
IOVU-210AD-RK39 Panel PC NOTE: When purchasing the arm, please ensure that it is VESA compliant and that the arm has a 75 mm interface pad. If the mounting arm is not VESA compliant, it cannot be used to support the IOVU-210AD-RK39. Step 2: Once the mounting arm has been firmly attached to the surface, lift the IOVU-210AD-RK39 onto the interface pad of the mounting arm. Step 3: Align the retention screw holes on the mounting arm interface with those in the IOVU-210AD-RK39, as shown in Figure 3-9.
IOVU-210AD-RK39 Panel PC Figure 3-10: Arm Mounting 3.4.3 Stand Mounting The IOVU-210AD-RK39 has Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA hole pattern. To mount the IOVU-210AD-RK39 onto a stand, please follow the steps below. Step 1: Line up the threaded holes on the system rear panel (Figure 3-9) with the screw holes on the monitor stand mounting plate.
IOVU-210AD-RK39 Panel PC Figure 3-11: Stand Mounting 3.5 Power-On/Off Procedure WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user. Ensure to connect the power cord to a socket-outlet with earthing connection.
IOVU-210AD-RK39 Panel PC Figure 3-12: Power Connectors 3.6 Online Resources All the resources for the IOVU-210AD-RK39 are available on IEI Resource Download Center (https://download.ieiworld.com). Type IOVU-210AD-RK39 and press Enter to find all the relevant software, utilities, and documentation.
IOVU-210AD-RK39 Panel PC 3.7 System Maintenance If the components of the IOVU-210AD-RK39 fail, they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. NOTE: A user cannot replace a motherboard. If the motherboard fails it must be shipped back to IEI to be replaced. Please contact the system vendor, reseller or an IEI sales person directly.
IOVU-210AD-RK39 Panel PC Chapter 4 4 Android OS Page 28
IOVU-210AD-RK39 Panel PC The IOVU-210AD-RK39 comes with Android OS pre-installed. This chapter introduces the user interface and basic functions of Android OS installed in the IOVU-210AD-RK39. 4.1 Home Screen Android OS supports multiple home screens allowing users to customize the screen with widgets, apps and shortcuts. The following sections describe the basic technique to manage the home screen. 4.1.1 Adding a Home Screen To add a home screen, touch and hold an app/widget icon.
IOVU-210AD-RK39 Panel PC 4.1.2 Switching between Home Screens Swipe right or left to switch between home screens. Figure 4-2: Multiple Home Screens 4.1.3 Favorites Tray The Favorites tray at the bottom of each home screen allows users to keep the most important or frequently used shortcuts.
IOVU-210AD-RK39 Panel PC 4.1.4 Adding Shortcuts To add app or widget shortcuts on the home screen, follow the steps below. Step 1: To add an app shortcut, tap the up arrow on the home screen to access the All Apps page. To add a widget shortcut, touch and hold the background of a home screen, then tap WIDGETS.
IOVU-210AD-RK39 Panel PC Step 2: Touch and hold an app icon or a widget, and drag it to the home screen.
IOVU-210AD-RK39 Panel PC 4.1.5 Arranging the Home Screen The items on the home screen can be moved and deleted. Touch and hold an item on the home screen and drag it where you want. To trash the item on the screen, drag it to the Remove icon. Release the icon when it turns gray.
IOVU-210AD-RK39 Panel PC 4.2 Navigation Buttons The navigation buttons shown in Figure 4-8 can always be found at the bottom of every screen. Figure 4-6: Navigation Buttons Buttons Description Tap to turn the volume down. Tap to return to the previous screen. Tap to return to the home screen. Tap to display all the recently used applications. Tap to turn the volume up. Tap to take a screenshot.
IOVU-210AD-RK39 Panel PC 4.3 Status Bar The status bar on the top of the screen (Figure 4-9) displays system status, such as battery level or signal strength. Figure 4-7: Status Bar Swipe down from the status bar to view notification and status details (Figure 4-10).
IOVU-210AD-RK39 Panel PC Figure 4-8: Notification List and System Status Page 36
IOVU-210AD-RK39 Panel PC Appendix A A Regulatory Compliance Page 37
IOVU-210AD-RK39 Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2014/30/EU Low-Voltage Directive 2014/35/EU RoHS II Directive 2015/863/EU If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply. If this equipment has telecommunications functionality, it also complies with the requirements of the R&TTE Directive 1999/5/EC.
IOVU-210AD-RK39 Panel PC Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] IEI Integration Corp déclare que l'appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5 CE.
IOVU-210AD-RK39 Panel PC Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] IEI Integration Corp týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 199 /5/ES. Suomi [Finnish] IEI Integration Corp vakuuttaa täten että laitteet on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
IOVU-210AD-RK39 Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
IOVU-210AD-RK39 Panel PC Appendix B B Safety Precautions Page 42
IOVU-210AD-RK39 Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the IOVU-210AD-RK39. B.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the IOVU-210AD-RK39 is opened.
IOVU-210AD-RK39 Panel PC B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IOVU-210AD-RK39 may result in permanent damage to the IOVU-210AD-RK39 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-210AD-RK39. Dry climates are especially susceptible to ESD.
IOVU-210AD-RK39 Panel PC B.1.
IOVU-210AD-RK39 Panel PC B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the IOVU-210AD-RK39, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the IOVU-210AD-RK39, please read the details below. Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth.
IOVU-210AD-RK39 Panel PC can restrict the airflow in the IOVU-210AD-RK39 and cause its circuitry to corrode. Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas. Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning.
IOVU-210AD-RK39 Panel PC Appendix C C Hazardous Materials Disclosure Page 48
IOVU-210AD-RK39 Panel PC C.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU). Please refer to the following table.
IOVU-210AD-RK39 Panel PC C.
