Table of Contents 1 Statement.............................................................................................. 1 1.1 Agreement ................................................................................... 1 1.2 Copyright information ................................................................. 1 1.3 Disclaimer .................................................................................... 2 1.4 Safety Information ...................................................................
1 Statement You must carefully read the instruction manual, especially the safety instructions, before you can connect, commission and operate the products of IDUTEX TECHNOLOGY CO., LTD., Ltd. (hereinafter referred to as “IDUTEX”). 1.
contract law, and other national laws. It is strictly forbidden to copy or transfer the data and software or some of the contents. If there is any violation, the technology will be held legally responsible according to law. 1.3 Disclaimer (1) This manual only provides the operation and operation methods for DS810 / DS810 Plus. The company does not assume any responsibility for the consequences caused by using the operation methods for other equipment operations.
1.4.1 Inspection Precautions (1) DS810 / DS810 Plus can only be connected to a safety outlet that is grounded. Before connecting, check and confirm that the diagnostic circuit is in good condition. Otherwise, it is not necessary to test to avoid damage to the main unit. If necessary, use a multimeter to measure the diagnostic seat voltage. (2) Use only the power cord supplied with the IDUTEX diagnostics or detected power line.
with high temperature components such as the water tank and the exhaust pipe. At the same time, be careful of the voltage generated by the components such as the ignition coil, the distributor cover, the ignition circuit and the ignition plug during engine operation. 1.4.2 Notes on the use of the instrument (1) This instrument is a precision electronic instrument. Do not drop it. Handle it as gently as possible, away from heat and electromagnetic fields.
a computer control system, the following should be noted: (1) Do not place magnetic objects such as radio speakers close to the computer, as the magnetic properties of the speakers can damage the circuits and components in the ECU. (2) When the ignition switch is turned on, the internal electrical equipment of the car must not be disconnected.
2 Product description 2.1 Product Overview DS810 / DS810 Plus is a proffessional efficient and convenient diagnistic tool for passenger car. Powerful quad-core Cortex-A53 2.0GHz processor with faster 2GB LPDDR4 and reliable 32GB On-board memory Android 10.0 OS running on 8.
2.
DOOR&WINDOWS X LANGUAGE X NOX SET X PUMP START X SEAT SET X START&STOP X TIRE SET X TRANSPORT X UREA SET X 11 OBD1 Connectors for DS810 Plus: BMW-20 BENZ-14 GM/DAEWOO-12 KIA-20 MAZDA-17 NISSAN-14 FIAT-3 HONDA-3 VW/AUDI -2+2 MITSUBISHI HYUNDAI -12+16 Chrysler -12+8 8
2.3 VCI Model for DS810 No.
VCI Box Parameters Processor ARM 32-bit Cortex processor Input Voltage DC 8-30V Operating Temperature -10 to 70℃ ( 14-158℉ ) , relative Humidity:<90% Storage Temperature -30 to 120℃ ( -22-248℉ ) , relative Humidity:<90% Communication model Bluetooth or USB Protocols ISO 9141, ISO14230, ISO15765, ISO11898, SAE-J1850 VPW, SAE-1850 PWM, UDS, K/L lines, High speed CAN, Middle speed CAN, Low speed CAN and Single wire CAN 10
2.4 VCI Model for DS810 Plus No.
No. Name Description ⑤ USB interface Used for wired communication with tablets ⑥ DC interface Power supply No.
VCI Box Parameters Processor ARM 32-bit Cortex processor Input Voltage DC 8-30V Operating Temperature -10 to 70℃ ( 14-158℉ ) , relative Humidity:<90% Storage Temperature -30 to 120℃ ( -22-248℉ ) , relative Humidity:<90% Communication model Bluetooth or USB Protocols ISO 9141, ISO14230, ISO15765, ISO11898, SAE-J1850 VPW, SAE-1850 PWM, J1939, J1708, UDS, K/L lines, High speed CAN, Middle speed CAN, Low speed CAN and Single wire CAN 13
2.5 Host Model 2.3-1 The front of host No.
2.3-2 The top of host No.
2.3-3 The back of host No. Name ⑨ Camera Description Camera lens and camera flash 2.6 The Product Specifications Item Description CPU Quad-core Cortex-A53 2.0GHz GPU G52 3EE MC1@800MHz Operaton system Android 10.
ROM 32 GB EMMC RAM 2G LPDDR4 Display 8.0 inch IPS Multi-touch Capacitive Touch Screen with 800*1280 resolution Camera(rear) 5.0 Megapixel, AF with Flashlight Connectivity WIFI: 802.11 b/g/n/ac Support Hot spot/ 2.4/5GHz BlueTooth 5.0, USB 2.0, Type-C HDMI: 1080P Output TF Card (Support up to 32GB) Audio Microphone Dual Speakers Power and Battery 8000 mAh 3.7 V lithium-polymer battery Input Voltage 8V – 30V Power Consumption 6.5 W Operating Temp. -10 to 50°C (14 to 122°F) Storage Temp.
3 Product software introduction The software homepage show the functional module: Diagnosis, Hot Function, Quick Support, DTC Query, Update, Data Manager, Feedback, Settings. 3.1 Diagnosis Extensive vehicle coverage for more than 80 Europe, America, Asia, China and Australia vehicle makes.
19
20
21
3.2 Hot function DS810 supporting 15 most commonly used service Reset Functions: OILREST, ABS BLEEDING, BATTERY, DPF, EPB, INJECTOR, SAS, THROTTLE, TPMS, IMMOKEYS, AT SET, GEAR, HEADLIGHT, SUSPENSION, SUNPROOF.
23
3.3 Update Logging in the Update function, you can download the vehicle data and service function data, you can select all and one-click upgrade.
25
3.4 Data Manager Here can manage the screenshot pictures, record video, vehicle software, testing report, data playback and function list. 3.5 Quick Support Remote technical support via Teamviewer QuickSupport.
3.6 DTC Query The fault information corresponding to the fault code can be quickly retrieved to help the repairer locate the component fault.
3.7 Feedback This function allows you upload vehicle diagnostics problems encountered by users during the use of the software. It can help engineers repair software errors quickly.
3.8 Settings View or set the Run mode, unit, search engine, System Info, User Info, Version Update, Languages.
30
31
32
4 Product activation (1) Click the Update fucntion on the home page 33
(2) Please activate the product in the first login 34
(3) Fill in the activation information, and click ACTIVATION 35
(4) The activation request sent, your mailbox has received the activation link. (5) Log in to the mailbox where you just filled in the activation information and click the activation link to complete the activation. 5 Cleaning and maintenance and warranty 5.1 Cleaning and maintenance (1) Do not disassemble it, try to handle it gently to avoid impact.
temperature-friendly and dust-free place and avoid high temperature and humidity, excessive smoke, easy vibration, direct sunlight, and strong magnetic field storage environment. (3) If the vehicle test operation is not performed for a long time, please run the main machine regularly to avoid moisture. (4) Unplug the power plug when not in use to avoid aging of electrical components caused by long-term power. (5) When the host is dirty, please disconnect the power before cleaning.
and will not be eligible to obtain any warranty from IDUTEX . (1) Product acceptance When you receive the product, please be sure to open the package check. Please carefully check the product category and quantity according to the attached list. If there are any shortages, errors, damages and other unpredictable abnormal conditions, please keep all the documents of the product and notify us immediately. Otherwise it is considered a waiver of the claim.
A. Failures, defects or flaws not directly related to the quality of the IDUTEX products, including but not limited to failing to use the product according to the user manual’s instructions, crash, fall, disassemble by anyone other than a IDUTEX approved service person, connecting improper accessories, damage owing to impact because of improper transport or storage of the product, etc. B. Natural wear and tear of the product: including but not limited to cover, keypad, touch screen, accessories, etc. C.
name, model number, serial number and purchase date of the product should be clearly stated on the invoice. It is covered with the official seal of the dealer. (6) Over-warranty product maintenance regulations If the product needs to be repaired by our company after the maintenance period, we will charge the maintenance fee appropriately, and the freight will be borne by the user.
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
1