Installation Guide

Tools Required
Package Contents
Ⓐ Niō Floodlight
× 1
Guardian and Protector!
Ⓑ Mounting Plate
× 1
Back half of Niō Ⓐ
Ⓒ Protective LED Cover
× 2
Increases weather resistance
of the unit
Ⓓ Accessory Visor
× 1
(optional)
Shields the camera from the elements
and reduces glare
Ⓔ Gasket
× 1
(pre-installed) to prevent water intrusion.
NOT Weatherproof enclosure
Ⓕ Mounting Template
× 1
A paper template to help mount
the unit easily.
Hardware included
Ⓖ Junction Box Machine Screws
× 4
Used to install Mounting Plate Ⓑ
directly to junction box
Ⓗ Mounting Screw and Anchor Kit
× 6
Used to install Mounting Plate Ⓑ when
installing to a wall, and not directly to
the junction box
Nio1 Installation Guide
• Safety Glasses
• Ladder
• Wire Strippers
• Phillips-head Screwdriver
• Silicone Sealant
• Power Drill with metal drill bits*
This product is designed for use with the following types of electrical conduit:
Rigid Metal Conduit
RMC, GRC
Intermediate Metal Conduit
IMC
Electrical Metallic Tubing
EMT
Planning Your Installation
Before assembly, turn power off at the circuit breaker or fuse. Ensure
that all parts are present. Compare parts with the “Hardware
Included” and “Package Contents” sections. If any part is missing or
damaged, do not attempt to assemble, install, or operate this fixture.
* Typical drill bits needed are 5/32” for junction box screw clearance using the 8-32x1.5" screws provided,
3/16" for wall screw clearance, 1/4" for wall anchor inserts. Please check the sizes you need.
Safety Information
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body. Please read and understand this entire
manual before attempting to assemble, install, or operate this light fixture.
Power: This product requires a 100-277V power source.
Installation: This light fixture should be attached to a wall. The light fixture should be mounted approximately 14 ft (4.3m) above the ground. If the light fixture is mounted higher than
recommended, this may reduce the coverage area.
Privacy Laws: Many states regulate the use of security cameras and other recording devices. It is the purchaser’s sole responsibility to ensure compliance with all applicable laws and to
provide any legally required notices. Check local laws regulating the use of any recording devices and cameras prior to installation.
Warranty
Please visit idter.com for full warranty details.