BMI BODY WEIGHT MONITOR MODEL : BWR102 USER'S MANUAL ADJUST THE SETTING OF THE REMOTE DISPLAY UNIT 1. enter the setting mode. 2. set the display format. 3. set the hour. 4, set the minute. 5. set the year 6. ser the date-month format. 7. set the month, 8. set the date.
ny 9. set the format of the ne. 0 ©/Q/Q RIL IR @® ACQUIRE WEIGHT FROM SCALE 1. select the display unit oa scale. 2. step an the scale. w . stand still tii reading is displayed. Note: Beep sound to indicate end of measurement. a step off the scale. Nate: Repeat steps 2 3 for next measurement.
STORE WEIGHT TO REMOTE DISPLAY UNIT 1. take measurement from scale. 2. activate receiving mode. Note: Beep sound indicates the activation of receiving mods. Receiving function will be activated for 30 see. | 3, weight received from scale. Note: Beep sound to indicate signal ls being received fom the scale. If height is not set, BMI will not be displayed. a . select the user. « . store the weight. Note: Beep sound to indicate the weight is stored to memory.
USER SETTING /MEMORY RECALL FROM THE REMOTE DISPLAY UNIT select the user. Notes mT If height Is not input, = it wilt not be displayed. TREE 1b. quit user mode. oO CED recall memory. ® ® 0/0/00 @ Gos “le BO 2b. set the height. o ® 030 ® 7] Bursae pes 4 CH03/2002, 8.
TIPS A. install the batteries into the unit. B. Whoa batteries are first installed 0 both the scale and remote display unit. B-1. acquire the weight on the scale. B-2. match the remote display unit with the scale. Not: beep sound indicates that the matching is activated. b) kook the reading on the scale and the remote display suit . <) if this fails, repeat step B-1 & B2. B-3. set the clock. C. after changing batteries of the scale, repeat steps B-1 & B-2. D.
1 IS BODY MASS INDEX (BMI) ? Body Mass index (BMI) is 2 measurement of your body height to weight ratio, BMI is an international standard that is used for evaluating obesity. It is expressed as your body weight in kilograms divided by the square of your body height in meters. BMI = body weight {kg} {body height {m)}t It can be used as an indication to estimate whether you are overweight or underweight.
TROUBLE SHOOTING Symptom Description Action 1 incorrect use of weight step off the spate and rr measurement is not stable. repeat the measurement, 2, seals overloaded check whether an excessive mass is put OL on the scale and thin repeat tie measurement. oem wr no height data is imputed for check the height and repeat the PA BMI or BML is out of range. measurement TER NOTES FOR THE USER A. maximum capacity: 150 kg / 330 Ib / 236t3lb graduation: height input range : 34.0 240.0 cm / 3°10" « ey D.
Bn Retribution pBS not load the scale when not in use LZ J. avoid on wet surfaces £ K. avoid from abrasive or corrosive leasing agent NOTE ON COMPLIANCE This device complies with Past 15 of the FCC Rules.
NOTE FOR THE USER * Please read the manual carefully before se. * The scale will calibrate automatically to provide so curate measurement whe the lease is placed cn the ground. Message: , well be displayed an the scale to Indicate the calibration is in process. Normally it will take 2-3 seconds only. Please leave tha scale alone when you see such massage. I BWT1O2AE.