User's Manual

ManualsBrandsIDT Technology ManualsElectronicsBell Push

PERSONAL RINGER

MODEL: BHDR619A

USER’S MANUAL

INTRODUCTION

Congratulations on your purchasing the BHDR619A personal ringer.

Sleek and elegant, this model is designed for ease of use. With security

coding system, interference to or from neighbouring Oregon Scientific

wireless products can be avoided.

No wiring is required between the Ringer and the Bell Push (BHDR229A).

Effective transmission range is up to 25 meters.

The standard package contains one Ringer and one Bell Push (BHDR229A).

You can acquire additional bell push from an authorized dealer.

FEATURES & KEY CONFIGURATION : RINGER

A. [ ] BUTTON

Changes the security system code from 1 to 16

B. [ VOLUME ] BUTTON

Selects high or low volume for the door chime

Summary of content (9 pages)

PAGE 1
MODEL: BHDR619A USER’S MANUAL INTRODUCTION Congratulations on your purchasing the BHDR619A personal ringer. Sleek and elegant, this model is designed for ease of use. With security coding system, interference to or from neighbouring Oregon Scientific wireless products can be avoided. No wiring is required between the Ringer and the Bell Push (BHDR229A). Effective transmission range is up to 25 meters. The standard package contains one Ringer and one Bell Push (BHDR229A).
PAGE 2
GB C. [ CODE ] BUTTON Press and hold to activate the security code setting mode D. [ RESET ] BUTTON Returns all settings to their original values E. LED INDICATOR Flashes when the door chime is sounding F. LOW-BATTERY INDICATOR Lights up when the batteries of the Ringer or Bell Push are running low G. LCD DISPLAY H. SPEAKER Emits the selected door chime I. BATTERY COMPARTMENT Accommodates two AA-size (UM-3) 1.5V batteries I FEATURES & KEY CONFIGURATION: BELL PUSH A.
PAGE 3
GB E D C BATTERY INSTALLATION & SETTING UP: BELL PUSH 1. Press the recessed door catch with a screwdriver to open the compartment. 1 2 3 2. Insert three AAA-size (UM4) 1.5V batteries. 3. Mount the compartment door on a wall using the two pieces of screws provided.
PAGE 4
GB 4. Assemble the front unit onto the compartment door. 3 2 4 1 BATTERY INSTALLATION: RINGER 1. Remove the screw on the bottom of the unit. 2. Pull out the battery door. 3. Insert two AA-size (UM-3) 1.5V batteries. 4. Close the battery door . 5. Replace the screw. AA AA 6. Hold down [ RESET ] with a blunt stylus. TABLE-STANDING OR WALL-MOUNTING Table-standing: Your unit comes with a stand connector for connecting it to other modular units in the same series.
PAGE 5
GB Wall-Mounting: Connector: Use wall-mount connector to align with other wall-mount bracket if neccessary. Assemble the front unit onto the compartment door on a wall using the two piece of screws provide. HOW TO SELECT THE DOOR CHIME The door chime is selected on the channel slide switch on the bell push. There are three chime patterns: Ding Dong (channel 1), Ding Ding (channel 2) and West Minister (channel 3). To select the channel, 1. Open the battery compartment door of the bell push. 2.
PAGE 6
GB HOW TO READ THE LOW BATTERY INDICATOR Replace the batteries when the low-battery indicator for the Ringer or bell push appears. Low battery indicator main Main unit ch.1 Channel 1 bell push ch. 2 Channel 2 bell push ch. 3 Channel 3 bell push HOW TO SET THE CHIME VOLUME Press [ VOLUME ] on the main unit to select between high and low volume. The volume level will be displayed.
PAGE 7
GB CODE 1 CODE 9 CODE 2 CODE 10 CODE 3 CODE 11 CODE 4 CODE 12 CODE 5 CODE 13 CODE 6 CODE 14 CODE 7 CODE 15 CODE 8 CODE 16 Note: These Oregon Scientific wireless models are compatible and will activate each other if the system codes are set to be the same. For example, if you install an additional Bell Push for your back door, make sure you adjust the system code of the additional Bell Push to be the same as your other Bell Push and your Ringer.
PAGE 8
GB 3. Do not subject the unit to snow or excessive force, shock, dust, temperature or humidity. 4. Do not tamper with the unit’s internal components. 5. Do not mix new and old batteries or batteries of different specifications. 6. No rechargeable batteries should be used in this product. Only use the type of battery as specified. SPECIFICATIONS General No. of system code combination : 16 No.
PAGE 9
Consult the dealer of an experienced radio/TV technician for help. Company Name: Oregon Scientific, Inc. Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA Telephone Number: (503)-639-8883 Website address: www.oregonscientific.com. Name and model number of the product: Personal ringer BHDR619A CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display.