INGEGNERIA DEI SISTEMI S.p.A. Rev. 1.
IDS Ingegneria Dei Sistemi S.p.A. - Document Evolution Revision Rev. 1.0 Date March 2011 Reason for modification First edition OUR CONTACTS IDS Ingegneria dei Sistemi S.p.A. – GeoRadar Division Via Enrica Calabresi, 24 56121 Montacchiello (PISA) - ITALIA Fax: +39.050.3124 205 inforis@ids-spa.it Customer Care department: customercare.gpr@ids-spa.it Tel.: +39.050.3124 355/356 Sales & Marketing department: sales.gpr@ids-spa.it Tel.: +39.050.
IDS Ingegneria Dei Sistemi S.p.A. - DISCLAIMER IDS WILL NOT BE HELD RESPONSIBLE FOR THE CONSEQUENCES OF AN IMPROPER USE OF THE EQUIPMENT AND/OR THE SOFTWARE. THIS SOFTWARE MAY INCLUDE AUTOMATED DATA PROCESSING AND ANALYSIS TOOLS.
IDS Ingegneria Dei Sistemi S.p.A. - CONFORMITY TO EUROPEAN REGULATIONS The equipment conforms to the following requirements set by EC regulations, including subsequent modifications, and to the legislation set by the member states that implement these regulations: 1999/05/EEC Radio Directive Warning: this equipment is destined for use in industrial environments (Class A apparatus).
IDS Ingegneria Dei Sistemi S.p.A. ! - CLEANING INFORMATION WARNING Before cleaning any external parts of the apparatus, make sure that all cables have been disconnected, including the power supply cable. If a damp cloth is used, make sure it is not too wet, to avoid any damage to the electrical components of the equipment. Wait until the equipment is totally dry before reconnecting the cables. The system should be cleaned periodically using a damp cloth. Do not use solvents or abrasive detergents.
IDS Ingegneria Dei Sistemi S.p.A. - BATTERIES REMOVAL INFORMATION Laptop Batteries: Manufacturer: PANASONIC Type: Li-ion Ni Characteristics: 10.65V 5.7Ah Removal instructions: 1. turn off the laptop; 2. open the drawer with the symbol of the batteries; 3. extract the battery pack pulling the tab. Radar batteries: Manufacturer: FIAMM FG21202 / SAFT MP176065 Type: rechargeable lead acid / rechargeable lithium-ion Characteristics: 12V & 12Ah / 15V & 6.8Ah Removal instructions: 1.
IDS Ingegneria Dei Sistemi S.p.A. - RECICLYING The crossed out wheeled bin symbol shown on the equipment indicates that the product must be recycled separately from other waste at the end of its useful life. Separate waste disposal of this product at the end of its useful life will be organized and managed by IDS. When you decide to dispose of the equipment, contact IDS and follow the system that IDS has set up to permit the separate collection of the apparatus at its life end.
IDS Ingegneria Dei Sistemi S.p.A. - WARRANTY CERTIFICATE CONDITIONS 1) IDS Ingegneria dei Sistemi S.p.
IDS Ingegneria Dei Sistemi S.p.A. - IMPORTANT NOTE FOR THE US CUSTOMERS FCC ID: UFW-HIBRIGHT This device complies with part 15 of the FCC Rules: Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2.
IDS Ingegneria Dei Sistemi S.p.A. - IMPORTANT NOTE FOR THE CANADIAN CUSTOMERS IC Certification Number: IC:8991A – HIBRIGHT This device complies with the requirements of IC Standard RSS-220 This Ground Penetrating Radar Device shall be operated only when in contact with or within 1 m of the ground.
IDS Ingegneria Dei Sistemi S.p.A. - INDEX 1. Hardware equipment of the Hi-Bright system ....................................................... 13 2. Mounting up the system ............................................................................................ 14 3. Cabling ....................................................................................................................... 17 4. The DAD Control Unit ...................................................................................
IDS Ingegneria Dei Sistemi S.p.A. - FIG. 5.5 – CONNECTING THE DAD CONTROL UNIT TO THE BATTERY PACK AND SWITCHING ON BUTTON (RED COLOR) .................................................26 FIG. 5.6 – WIRELESS PORT TO BE ACTIVATED ON CF-19 ....................................27 FIG. 5.7 – WIRELESS CONNECTION ON THE DAD ..................................................28 FIG. 5.8 – CONFIGURATION FILE FOR WIRELESS CONNECTION ....................... 28 FIG. 6.1 – MAIL SENT BY IDS TO THE CLIENT ................
IDS Ingegneria Dei Sistemi S.p.A. - 1. HARDWARE EQUIPMENT OF THE HI-BRIGHT SYSTEM This handbook shows you the equipment you will receive and guides you through the configuration of your Hi-Bright system. The system is composed of: A Trolley Fig. 1.
IDS Ingegneria Dei Sistemi S.p.A. - DAD units Power supply Cables Battery & Adapter Synchro cable Ethernet switch Antenna cables LAN cables Antenna Array Fig. 1.2 – Hi-Bright Equipment 2. MOUNTING UP THE SYSTEM First you have to link the antenna array to the trolley. To do this make the lower end of the trolley fit the upper junction of the array and fix them together with their dedicated plastic screws (Fig. 2.1).
IDS Ingegneria Dei Sistemi S.p.A. - Fig. 2.1 –Antenna junctions Fig. 2.
IDS Ingegneria Dei Sistemi S.p.A. - Place the battery in the lower black bag of the trolley and the two DAD control units in the upper one; this bag also has a pocket in which you can leave the Ethernet switch once connected. Battery Adapter Fig. 2.
IDS Ingegneria Dei Sistemi S.p.A. - 3. CABLING Take the two antenna cables: link connector 1 to the Ant.1 port of one of the DAD (Fig. 3.1), then do the same for connector 2 and the other DAD. Fig. 3.1 – Antenna cable connection Connect the wheel cable of the trolley with the wheel port of DAD n.1 (Fig. 3.2) Wheel cable Fig. 3.
IDS Ingegneria Dei Sistemi S.p.A. - Connect the two power supply cable from the Battery port of the DAD units to the battery plugs (Fig. 3.3), also the Ethernet switch must be supplied in this way (Fig. 3.4). Fig. 3.3 – Battery cable Fig. 3.4 – Ethernet switch power supply cable Connect the synchronization ports of the two DAD with the synchronization cable (Fig. 3.
IDS Ingegneria Dei Sistemi S.p.A. - Fig. 3.5 – Synchronization cable Link the waterproof LAN connectors from the LAN port of the DAD units to the port 1&2 of the Ethernet switch (Fig. 3.6), then take the other LAN cable that will connect port 3 of the switch to the acquisition laptop (Fig. 3.7). Fig. 3.
IDS Ingegneria Dei Sistemi S.p.A. - Fig. 3.7 – LAN cable from switch to laptop You can find more info about the DAD unit and its cable connectors in Chapter 2: The DAD control unit. You can also find more details regarding acquisition laptop in Chapter 4: The Notebook Computer.
IDS Ingegneria Dei Sistemi S.p.A. - 4. THE DAD CONTROL UNIT The DAD Control Unit is the control unit responsible for directing the antennas and digitalising the acquired radar data. The DAD Control Unit has the following ports Lan Port for a network connection to the Notebook Computer Battery Port to connect the battery Wheel Port to connect the position sensor wheel Ant.1/CHAINE - Ant.
IDS Ingegneria Dei Sistemi S.p.A. - Ant1 and Ant 2 Wheel Port Connectors Fig. 4.2 – –DAD side Fast Wave with connections to position sensor and antennae Considering the type of available antenna, the following combinations are possible: 1. Ant.1 (connector with 19 poles) This kind of connector may be connected to the following categories of radar antennae. Entire range of TR IDS antennae that has a 19 pole connector and foresee a cascade connection, Fig.
IDS Ingegneria Dei Sistemi S.p.A. - Entire range of TR IDS antennae that have an 11 pole connector, if supplied with an appropriate 19-11 pole adaptor (Fig. 4.4). Fig. 4.4 – 19-11 pole Adaptor 2. Ant.2 (11 pole connector) This kind of connector may have the following antenna radar categories connected Entire range of mono static TR IDS antennae with an 11 pole connector Entire range of TR IDS antennae with internal or external multiplex and an 11 pole connector 5.
IDS Ingegneria Dei Sistemi S.p.A. - Graphics/Video Memory: Intel 945GM video accelerator with up to 128MB shared video memory Wireless Networking: WLAN 802.11a/b/g, Bluetooth 2.0, Optional WWAN (EVDO, HSDPA) and GPS Ports: Two USB 2.0, Firewire, Ethernet, modem, headphone, mic, docking connector Card Slots: PC Card Type II, SD Card slot Weight: 5 pounds Size: 10.7 x 8.5 x 1.9 inches Warranty/Support: Three-year limited warranty, parts and labor lifetime toll-free 24/7.
IDS Ingegneria Dei Sistemi S.p.A. - Fig. 5.2 – Lan Cable Fig. 5.3 – Lan Cable connection between the Notebook Computer and the DAD Control Unit Connect the DAD Control Unit to the Battery using the Battery Cable (Fig. 5.4) as shown in (Fig. 5.5) Fig. 5.
IDS Ingegneria Dei Sistemi S.p.A. - Fig. 5.5 – Connecting the DAD Control Unit to the battery pack and switching on button (red color) Press the red button to switch on the DAD control unit (Fig. 5.5). This button has to be kept pressed until the blue on switch lights up. If the K2_FW software is not activated within 30 seconds, the indicator light will start to flash. As soon as the K2_FW software is activated the indicator light stops flashing and appears a constant blue light.
IDS Ingegneria Dei Sistemi S.p.A. - Here below you can see the requirements and steps to connect by wireless DAD to PC: 1) System requirement: wireless network board of PC must support network protocol type 802.11g. 2) Disconnect Lan cable from DAD and from PC. 3) Connect the wireless plug on LAN port of the DAD (Fig. 4.1 e Fig. 5.7). 4) Activate wireless network on PC choosing “ON” with the button on relative port shown in Fig. 5.6. 5) Set up wireless board on PC with the following IP address: 192.168.
IDS Ingegneria Dei Sistemi S.p.A. - Fig. 5.7 – Wireless connection on the DAD Fig. 5.
IDS Ingegneria Dei Sistemi S.p.A. - 6. ON LINE ASSISTANCE 6.1 Remote assistance using Webex Support Center Webex Support Center is a service that allows the activation of a two host session, making an application or the desktop available to the other user or letting you capture another remote desktop. It can be used to perform web conferences and presentations. It is easy to use thanks to its simple and intuitive interface.
IDS Ingegneria Dei Sistemi S.p.A. - Once you have clicked on the link sent by email, the following window will appear. Insert your data into the form (see Fig. 6.2). Fig. 6.2 – Client data insertion form Once you have clicked Submit, the following page will appear showing a downloading bar. The session starts as soon as the download is complete. (see Fig. 6.3). Fig. 6.
IDS Ingegneria Dei Sistemi S.p.A. - As you can see from the following screen, (Fig. 6.4) you are given a console, just containing the Chat, Video and Leave Session commands. Fig. 6.4 – Welcome to Webex Support Center window At this point, IDS Customer Care can perform a range of operations on your desktop: Request control of the desktop using the Request Control command. Give you control of the IDS desktop using the Share Control command. Request to display the remote desktop using Request View.
