iDevices SWITCH User Manual
iDevices Switch Table of Contents In the Box .............................................................................................................. X System Requirements ......................................................................................... X Getting Started ..................................................................................................... X Unit Set Up ................................................................................................
iDevices 1. Switch In the Box Inside your Switch box, you will find: • 1 Indoor US Switch • Quick Start Guide 2. System Requirements • • 3. iPhone 5 or higher with iOS 8 or higher iDevices Connected App version 2.0 or higher Getting Started 3.
iDevices Switch • • • • • • 4. Available devices will be shown at the top of the app.
iDevices Switch Think of a ‘Zone’ as a collection of rooms in your Home that you would want to control simultaneously. For example, you may want to shut off your ‘Upstairs’ Zone or maybe the ‘Kids Bedrooms’ Zone. Scene Set up customized ‘Scenes’ to control multiple products with a single command. This might be, “I’m Going To Bed” where your bedroom lights shut off and your fan turns on. ‘Scenes’ can be set to a reoccurring schedule or can be on-command actions. o 5.
iDevices Switch The following table summarizes the Switch modes and LED status states. Mode Pairing Pairing Expired Pairing Restart Pair Set Up Mode WiFi Link Up WiFi Link Down Lockout Factory Reset Identify Description The accessory is waiting for the handset to configure the accessory’s WiFi. The LEDs flash blue. Pairing mode has expired and the user must press the button (>3 seconds) to reenter Pairing mode. The LEDs slow flash blue.
iDevices 6. Switch Rating Information UL Rated to UL STD 244A & STD 498A Listing: E470483 Input: 125VAC, 60 Hz Output: 125VAC, 60 Hz Resistive: 1800W (15A) Tungsten: 600W (5A) Motor: 1/2HP For use in dry indoor locations only This product is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children should be supervised and instructed not to play with this product. 7.
iDevices Switch (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.