I N S TA L L AT I O N & S E T U P G U I D E I N WA L L S O L U T I O N S 1
REQUIRES • Wi-Fi 2.4 GHz 802.11 b/g/n compatible network • Router Security Settings Supported: WPA, WPA2, or None • Free iDevices® Connected App • 120VAC “Line” and “Neutral” wires in each gang box • HomeKit requires an iPhone, iPad or iPod touch with iOS9 or later • Android™ 4.3+ devices with Bluetooth® Smart technology ® NOTE: 5 GHz networks are not compatible.
B E F O R E Y O U S TA RT • Read through this Installation Guide in its entirety before starting installation of your iDevices® Wall Outlet or removal of your old outlet. Incorrect installation can be dangerous and can damage your iDevices® Wall Outlet or your home. • Visit our YouTube channel for tips on installation and setup: www.youtube.com/user/iDevicesInc • Turn OFF the power to the circuit you are working on at your home’s breaker or fuse panel.
GETTING TO KNOW THE i D E V I C E S ® WA L L O U T L E T 1 2 3 6 Top Outlet On/Off. Pressing this button will turn the individual outlet On or Off. DEVICE RESET: Press and hold for 10 seconds until LED blinks red. PAIRING MODE: Press and hold for 3 seconds until LED is solid blue. Bottom Outlet On/Off. Pressing this button will turn the individual outlet On or Off. DEVICE RESET: Press and hold for 10 seconds until LED blinks red. PAIRING MODE: Press and hold for 3 seconds until LED is solid blue.
I N S TA L L AT I O N STEP 1 Take a photo of your existing wiring for future reference. Turn off the power to the circuit at your breaker or fuse panel. If you are replacing an existing outlet, verify that the outlet no longer has power before proceeding.* STEP 2 Wire the receptacle in place of an existing receptacle according to the adjacent diagram with the provided wire nuts. Ensure the wire nuts are fastened securely.
STEP 3 Secure the iDevices Wall Outlet back into the gang box. STEP 4 Turn the power back on at the breaker. If the outlet is connected properly, you should see the LED indicator rapidly flash blue to indicate the unit is ready to connect to the app. 10 LED will rapidly flash blue when it’s ready to connect to the app.
CONNECTING TO YOUR NETWORK 1 IDEVICES® CONNECTED APP Download the iDevices® Connected app and connect to your home’s Wi-fi® network. To proceed with setup please be sure both Wi-fi® and Bluetooth® are enabled on your device. n Icon 12 2 POWER ON OUTLET Ensure the Power/Breaker is turned back On and the LED on the iDevices® Wall Outlet is rapidly flashing blue.
CONNECT OUTLET HomeKit™ setup code is located on the pull out tab of the iDevices® Wall Outlet. Launch the iDevices® Connected app and you will be guided through the process of connecting your Wall Outlet. For iOS devices you will need the HomeKit™ setup code, located on the pull out tab. XXX-XX-XXX XXX-XX-XXX Connected App Icon Basic One Color Icon Pull out tab Optimized Small Versions 14 .75pt Additional .
R E F E R E N C E I N F O R M AT I O N LED COLOR CODES LED State Description Blue Flashing Solid Blue Slow Blue Flash Solid Blue 16 Wall Outlet is waiting for the handset to configure the accessory’s Wi-Fi®. The LED flashs blue. Wall Outlet is waiting for the handset to initiate and complete pair set up through either Wi-Fi® or BLE (Bluetooth Low Energy). The LED is solid blue.
S U P P O RT If at any time you require assistance, please contact our Customer Experience Team. T R O U B L E S H O O T I N G A N D S U P P O RT A DEVICE RESET CAN RESOLVE MOST ISSUES. Reset your Wall Outlet by holding either On/Off button down until the LED flashes red rapidly. Call: 888.313.7019 Email: Support@iDevicesinc.com Visit: iDevicesinc.
R E G U L AT O RY I N F O R M AT I O N Product Information: Manufacturer: iDevices LLC Model: IDEV0010 FCC: 2ABDJ-OUTLET IC: 11569A-OUTLET The iDevices® Wall Outlet IDEV0010 is certified to comply with applicable FCC and IC rules and regulations governing RF and EMI emissions. This device complies with Part 15 of the FCC Rules.
22 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician to help. • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment compromettre le fonctionnement.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. HomeKit is a trademark of Apple Inc. Controlling HomeKitenabled accessories away from home requires an Apple TV (3rd generation or later) with Apple TV software 7.0 or later and an iPhone, iPad, or iPod touch with iOS 9 or later. Amazon, Echo, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.