iShower 2 User Manual V1- 8/29/14 Table of Contents 1. In the Box ...............................................................................................................................
. Getting Started .................................................................................................................... 2 2.1 Battery Replacement ................................................................................................................ 2 2.2 Power On & Off ........................................................................................................................... 3 2.3 Pairing ..............................................................................
2.2 Power On & Off To power on the iShower2: • Press and hold the power button for 2 seconds until the display reads “HI”. You will see the iShower2 logo blinking. To power off the iShower2: • Press and hold the power button until the display reads “BYE”. 2.3 Pairing To Pair your iShower2 to your iPhone, iPad, iPod touch or Android device for the first time follow these steps: • • • • • • Go to your device settings and turn Bluetooth on.
• • • • • Hold the Bluetooth/Pair button for 5 seconds on the iShower2 to enter Setup Mode. Use the forward and back buttons to select the proper USE#. Press the Play/Pause button to select the displayed user for setup. The iShower2 will try to pair for 30 seconds. Select iShower2 in your Bluetooth settings. Your device will now complete the pair with the iShower2. Once the connection has been made, the iShower2 logo will stop blinking and turn solid blue. 2.
• • • Press Bluetooth/Pair button, this will enter User Select Mode. The iShower2 will display the last user connected. Use forward and back buttons to select USE#. The iShower2 will only display users that are paired. Press Play/Pause to select user. If a user is in range and Bluetooth is on, the iShower2 will connect and begin playing audio. If the iShower2 does not connect, it will display USE# Fail. Make sure your device is within range, on and ready for Bluetooth. Repeat steps to attempt connection.
• Press the clock button to set time. To Display Clock time: • Press the clock button to display the time. The time will display for 5 seconds. 3.5 Calls • • To receive calls from your iShower2 press the Backwards button. To ignore/end a call on your iShower2 press the Forward button. Note: You can only receive calls from the iShower2. 3.6 Reset • • • Hold the Play/Pause button and Bluetooth/Pair button at the same time for 10 seconds with the iShower2 powered on.
Q. Can the iShower2 be submerged in water? A. No. The iShower2 is water resistant, not water proof Q. Can I stream to multiple iShower2’s at once? A. No, due to limitations with Bluetooth you are only able to stream to one iShower2 at a time. Q. How many users can pair with the iShower2? A. You can pair up to 5 users per device Q. What is the battery life? A. The battery life is up to 15 hours. Q. What is the Bluetooth range? A. The Bluetooth range is up to 200ft. Q.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s).
