Department MIFCM – User manual Version 1.00 Internal 1 (8) User manual MIFCM Version V1.00 Date Author Description 11.03.2020 Tpa First version Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel +358 20 743 4175 | info@idesco.fi | www.idesco.
Department MIFCM – User manual Version 1.00 Internal 2 (8) Contents 1. Introduction .................................................................................................................................. 3 2. Technical Specification ................................................................................................................. 3 2.1. 2.2. 2.3. 2.4. 2.5. 2.6. 2.7. 2.8. 2.9. 3. Operating voltage, power, electrical interfaces................................................
Department MIFCM – User manual Version 1.00 Internal 3 (8) 1. Introduction MIFCM is a Radio Frequency Identification (RFID) -reader to automatically and uniquely identify and track inventory and assets. Transponders can be read without line of sight. Read range can be up to a several centimeters depending on transponder size and shape. 2. Technical Specification 2.1. Operating voltage, power, electrical interfaces Current consumption is 300 mA max. Operating voltage range are 11,4 – 12,6 VDC. 2.2.
Department MIFCM – User manual Version 1.00 Internal 4 (8) Communication speed Baud rates 9600, 19200, 57600, 115200 can be selected. Default is 19200 bauds.
Department MIFCM – User manual Version 1.00 Internal 5 (8) 2.7. Host Device MIFCM does not have power supply regulation on the module. It uses regulated 12V voltage supply which is supplied by I/O card of host device. The used I/O card model is either INOUT3R or INOUT3X 2.8. Antenna grounding The antenna must be grounded with the grounding wire to specific part of end-product. The grounding points are at RF-antenna holders (holder1 metal plate and holder 2 metal holder).
Department MIFCM – User manual Version 1.00 Internal 6 (8) Picture 2. Antenna holder 2. Grounding via metal holder Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel +358 20 743 4175 | info@idesco.fi | www.idesco.
Department MIFCM – User manual Version 1.00 Internal Picture 3. RF antenna holder 2. Grounding via metal holder and metal mounting block Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel +358 20 743 4175 | info@idesco.fi | www.idesco.
Department MIFCM – User manual Version 1.00 Internal 8 (8) 2.9. Installation MIFCM must be professionally installed. The only permitted type of antenna is IA013CM. Use of any other antenna is not permitted. Due to the unique market and function targeted by this product, this product needs a trained professional engineer to configure and integrate this product into the final host configuration. The product will not be sold via retail or directly to the general public or by mail order.
