SDI 010 – USB Contact/ Contact less reader) OEM Manual
SCM Microsystems (India) Contents 1.0 1.1 1.2 1.3 2.0 2.1 2.2 2.3 3.0 3.1 3.2 3.3 3.4 4.0 4.1 4.2 4.3 5.0 5.1 5.2 Product Specification ................................................................................................................ 3 Overview................................................................................................................................... 3 Product Features ....................................................................................................
SCM Microsystems (India) 1.0 1.1 Product Specification Overview The SDI 010 is part of the SCRx31 product family based on the SCM Microsystems’ STC II Micro Controller. Taking advantage of existing products, this device adds contactless capability and makes it ideal for any application requiring both interfaces to coexist. In addition, the SDI 010 is the industry’s first to offer on-board flash. This enables future firmware and application enhancements that guarantee against obsolescence.
SCM Microsystems (India) 2.3 Smart card slot details • • • 3.0 3.1 Software Specifications Operating System • • 3.2 Single smart card slot implemented. Manual ejection mechanism Class A or AB cards ONLY; No support for B only cards Generic device firmware Vendor drivers for WIN98SE, WINME , WIN2000, WINXP, Windows Server 2003, Win CE ICC Parameters Some important smart card parameters, supported smart card types, maximum operable smart card frequencies, operating voltages etc.
SCM Microsystems (India) 3.4 USB Parameters USB Parameters USB Specification USB Speed Device Class 4.0 4.1 Value/Description USB 2.0 FS Device Full Speed Device (12Mbit/s) Vendor Software Modules Firmware Device firmware that supports USB interfaces is provided. On USB, the firmware implements dual slot architecture – one slot for the CONTACT interface and another for the CONTACT-LESS interface. 4.
SCM Microsystems (India) Operating System WIN98 WINME WIN2000 WINXP 5.0 Support Yes Yes Yes Yes Regulatory Compliance This section describes the product's compliance with U.S. and international safety and electromagnetic compatibility (EMC) regulations. 5.1 Safety Regulations Below Table the safety regulations the product complies with when correctly installed in a compatible host system. Regulation UL 60950 EN 60950:2000 5.
SCM Microsystems (India) with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
