SCL 010/SC R331CL -NTTCom – USB Contact less reader OEM Manual
SCM Microsystems (India) Contents 1.0 1.1 1.2 1.3 2.0 2.1 2.2 3.0 3.1 3.2 3.3 4.0 4.1 4.2 4.3 5.0 5.1 5.2 Product Sp ecification ....................................................................................................... ......... 3 Overview................................................................................................................................... 3 Product Features ........................................................................................................
SCM Microsystems (India) 1.0 Product Specification 1.1 Overview The SCL010/ SCR331CL -NTTCom is based on the SCM Microsystems’ STC3 Micro Controller. The SCL010/ SCR331CL -NTTCom is the industry’s first to offer on-board flash. This enables future firmware and application enhancements that guarantee against obsolescence. The SCL010/ SCR331CL -NTTCom offers the best price/performance in the market. 1.2 Product Features PC/SC 2.
SCM Microsystems (India) 3.0 Software Specifications 3.1 Operating System Generic device firmware Vendor drivers for WIN98SE, WINME , WIN2000, WINXP, Windows Server 2003,Windows vista, Windows Server2008., 3. 2 PICC Parameters Some important PICC parameters, supported contact-less card types, maximum operable PICC frequencies, operating voltages etc., are detailed in the tables below.
SCM Microsystems (India) 4.0 Software Modules 4.1 Firmware Device firmware that supports USB interface is provided. On USB, the firmware implements CONTACT-LESS interface. 4.2 USB Drivers The driver gets loaded and it handles CONTACT-LESS operations. The reader is seen at the host level as below. 'SCR331CL-NTTCom' - for SCR331CL-NTTCom 'SCL010' - for SCL010 4.3 Utilities 4.3.1 Installation SCM provides Install Shield Installer for Windows to install the product.
SCM Microsystems (India) 5.0 Regulatory Compliance This section describes the product's compliance with U.S. and international safety and electromagnetic compatibility (EMC) regulations. 5.1 Safety Regulations Below Table the safety regulations the product complies with when correctly installed in a compatible host system.
SCM Microsystems (India) with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.