SCM Microsystems (India) OEM MANUAL PACT (Contact/Contact-less) Physical access control terminal OEM Manual – PACT-STC II Page 1 of 10
SCM Microsystems (India) Contents 1.0 1.1 1.2 2.0 Product Specification ................................................................................................................ 3 Overview................................................................................................................................... 3 Product Features ...................................................................................................................... 3 Hardware Specification ...................
SCM Microsystems (India) 1.0 1.1 Product Specification Overview The term PACT is the acronym for Physical Access Control Terminal. The PAT1241 has three user interfaces, the Contact, the contactless Smart Card and the Pin-pad and is intended for indoor use. Apart from this there is the Access granted/denied indication LED and Buzzer. The PAT1241 is based on the PACT STCII-B ASIC and is designed for indoor operation. The contact less interface is managed by the Mifare controller.
SCM Microsystems (India) 2.0 Hardware Specification 2.1 Power Supply +12V DC is taken from the input to the control panel and regulated to +5V DC and +3.3V DC on the PAT13X1 PCBs. Connect the Shield pin of the reader to the base-plate and the shield of the cable to the base-plate. Current Consumption is 110 -250 mA@12V for Device full operation. 2.2 • • • Clock Frequency STC-II chip internally running @22.
SCM Microsystems (India) 2.5.3 Buzzer • User feedback (beep) with different sounds. 2.5.4 Installation Fix the base-plate on the wall and then mount the reader with a switch for tamper evidence in between . Wires required for connection to the alarm needs to be connected to the switch, prior to mounting the reader. Connect the D0, D1, LED, BUZZER, RELAY lines from the reader to the control panel. Shown below is the bottom portion of the reader.
SCM Microsystems (India) OEM Manual – PACT-STC II Page 6 of 10
SCM Microsystems (India) 2.5.
SCM Microsystems (India) 3.0 3.1 Software Specifications Contact Card Parameters Some important smart card parameters, supported smart card types, maximum operable smart card frequencies, operating voltages etc., are detailed in the tables below. ICC Parameters Class A Smart Cards Class AB Smart Cards ISO-7816 compliant Smart card operating frequency Maximum supported card baud-rate 3.
SCM Microsystems (India) 4.0 Regulatory Compliance This section describes the product's compliance with U.S. and international safety and electromagnetic compatibility (EMC) regulations. 4.1 Safety Regulations Below Table mention the safety regulations the product complies with when correctly installed in a compatible host system. Regulation UL 60950 EN 60950:2000 4.
SCM Microsystems (India) The following information is provided to address worldwide product ecology concerns and regulations. 5.3.1 Disposal Considerations This product contains the following materials that may be regulated upon disposal: lead solder on the printed wiring board assembly. 5.3.2 Recycling Considerations SCM encourages its customers to recycle its products and their components (e.g., batteries, circuit boards, plastic enclosures, etc.) whenever possible. In the U.S.
