PAC2111 Operation / Installation Manual Ver1.
PAC2111 Operation / Installation Manual Version History Date 16-Apr-12 05-June-12 Version 1.0 1.1 IDT.QM.P2.T1.DT Description of Changes Initial Added Industrial Canada – Class B statement VER1.
PAC2111 Operation / Installation Manual Contents 1.0 Introduction ........................................................................................................................... 4 2.0 Reader ................................................................................................................................... 4 2.1. Functionality ............................................................................................................................ 4 2.2 Top Casing ..........
PAC2111 Operation / Installation Manual 1.0 Introduction This document details the Physical Access Control Smart card reader PAC2111 and the installation procedures. 2.0 Reader 2.1. Functionality PAC2111 reader is a physical access control smart card reader that can read HF contactless cards, conform to the following standards: ISO 14443 A & B, ISO15693. The reader can interface with an access control system equipped with a Wiegand or RS485 serial interface The reader consists of the following parts. 2.
PAC2111 Operation / Installation Manual 2.3 Bottom Casing –Potted reader with Pigtail Cable Fig : Top side of Bottom casing Bottom side of Bottom casing 3.0 Product details Model Name : PAC2111 Device Type : RFID reader, 13.56MHz (HF) Physical Access control Reader (accessory equipment) Type of equipment : Outdoor use, potted reader, Wall mounted Cable Type : Pigtail Cable , 11 Core + Drain wire. Rating : 5-16V DC (Low voltage) ; Pk Current – 200mA.
PAC2111 Operation / Installation Manual 4.2 Recommended Infrastructure Wiegand cable ( 11 core** + Drain , 22AWG for 500Ft or 24AWG for 300Ft ) Linear DC power Supply 5-16 V, 1A min. ** Note: The number of cores on the cable can vary depending on the actual field requirement. On a minimum 6 Cores + Drain is recommended (Power 2, Wiegand outputs -2, Wiegand Inputs- 2) 4.
PAC2111 Operation / Installation Manual 4.5 Mounting the Reader a. Make two holes on the wall at a vertical distance 80 mm apart to match with the mounting holes on the Bottom casing. b. Insert the nylon screw plugs into the wall. c. Connect the wires on the pigtail cable to the corresponding wires in the cable from the wall. d. The Bottom casing which is potted is to be now secured onto the wall using the screws supplied.
PAC2111 Operation / Installation Manual 5.0 Certifications 5.1 CE Marking Identive hereby declares that the PAC2111 devices mentioned herein are in compliance with the essential requirements and other relevant portions of the Directive R&TTE 1999/5/EC. 5.2 IC Marking The Industry Canada device ID is IC : 7485A-PAC2111R2 This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s).
PAC2111 Operation / Installation Manual 6.0 Product label IDT.QM.P2.T1.DT VER1.
