Smart Golf User Guide
Click the attachment in the mail to download it. When the app is normally installed on the device, it opens the app. The SMARTGOLF logo appears and the app is launched.
Click the SETTING button on the main screen. Left : OFF Right : ON Turn on the power through the power switch on the back of the club. Click the Scan button to scan the active clubs around you.
Bluetooth Scan shows clubs that are powered on. You can click the club you want to connect to, and if the club is normally connected, the setting window turns off. If it is the first club, it will appear in New Club If you've connected to an existing club, it will appear in SubsCribe Club. ※If the club is connected to another device, the club does not appear. If the club is unable to connect, close the settings window and scan again.
Click the ANALYSIS button. Enter the ANALYSIS If the club moves on the screen while the count sound is heard from the device after pressing the address button , the connection is successful.
When the swing is finished, after the sound of the end of recording is heard, when the SWING INFO window appears, it means that the application connection with the club is complete and the swing is completed normally.
FCC compliance information THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions : (1) This device may not cause harmful interference , and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.