PCSA CIRCUIT BOARD HOLDER ESD Safe in accordance with regulations IEC 61340-5-1:2016 and IEC 61340-2-3:2016
PCSA Circuit board holder Models PCSA-1 work surface: 280 mm x 220 mm PCSA-2 work surface: 510 mm x 220 mm PCSA-4 work surface: 510 mm x 350 mm Additional splint: BS-PCSS-1 Additional foam: PCSA-1.2 Additional splint: BS-PCSS-2-4 Additional foam: PCSA-2.2 Additional splint: BS-PCSS-2-4 Additional foam: PCSA-4.
PCSA Circuit board holder Models Important notes: 1. Do not force the closing of the top cover with your hands X 2.
PCSA Circuit board holder Combinations and work surface in mm PCSA-2 PCSA-4 FEATURE: • Circuit board holders of the PCSA series are the ideal tool for fitting circuit boards with components. The holder can easily be demounted in single parts and be reassembled in different combinations. • The standard models PCSA-1/2/4 are equipped with 1 removable middle bridge and 2 adjustable splints. Thus two work areas can be created.
PCSA Circuit board holder How to use PCSA detachable assembly jigs fo pc board PC Assembly jig with component-press lid closed screwed or clamped to work-top, in relation to the height of the components. Sliding rails may be positioned by means of self-locking sleeves. A system of springs makes it possible to insert and remove printed circuit boards without changing position of sleeves. Turn the knob to remove the middle bridge.
PCSA Circuit board holder Spare Parts PCSA-1 PCSA-2 / PCSA-4 BS-PCSS-1: Sliding rail PCSA-1.2: Foam S-PCSS-2-4: Sliding rail PCSA-2.2: Foam PCSA-4.
PCSA Circuit board holder Spare Parts PCSA-1 PCSA-2 PCSA-4 BS-PCSS-NBS: Sliding block MO-BS-PCSS: Spring SF-BS-PCSS: Ball diam.
PCSA Circuit board holder RIC-PCSA-N1 SR-PCSS replaced by AC-PCSA PCSA-1.2 PCSA-2.2 PCSA-4.
