User's Manual

ManualsBrandsIdeal Industries ManualsElectronicsDigital Transmission System

Product Manual

SCD1000 – Downlight/LED Smart Connector

ND 7943-1 07/2014 Users Manual – SCD1000 Downlight/LED Smart Connector Page 1

www.idealindustries.com

PRODUCT DESCRIPTION

The AC Smart Connector is a wireless device

which provides electrical connectivity

between the light fixture (load) and

120V/277V AC line power and provides

on/off power control and dimming signals

to the load. The information that tells the

connector to power on/off/dim the fixture

is acquired via wireless signals that

originate from a building automation

system or from room controls, based on

environmental conditions and/or

predetermined programs.

KEY FEATURES

FCC and IC approved

External fixture mounting

Small form factor

Integrated Wire Antenna

RoHS compliant

PRODUCT CONTENTS

The following items are included inside the

package:

Qty

Description

SCD1000 Smart Connector

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

All other trademarks are the property of their respective owners.

Summary of content (9 pages)

PAGE 1
Product Manual SCD1000 – Downlight/LED Smart Connector PRODUCT DESCRIPTION The AC Smart Connector is a wireless device which provides electrical connectivity between the light fixture (load) and 120V/277V AC line power and provides on/off power control and dimming signals to the load.
PAGE 2
Product Manual SCD1000 – Downlight/LED Smart Connector IDEAL Model SCD1000 Downlight/LED Smart Connector Installation Instructions WARNING: This is a current rated device. Use in applications involving amperage beyond its rating can be dangerous and cause electrical fires. Wiring must comply with all applicable electrical codes. Turn off power before removing or installing connector.
PAGE 3
Product Manual SCD1000 – Downlight/LED Smart Connector LOAD The LOAD(red) and Neutral(White) wire are 18 AWG solid copper conductors. 1. Strip wires to 1/2”. 2. Connect Smart Connector LOAD wire to the ballast hot line with appropriate sized wirenut or push-in connector if necessary. 3. Connect Smart Connector NEUTRAL Output to the ballast neutral with appropriately sized wirenut or push-in connector if necessary. 4. For feed-through (i.e.
PAGE 4
Product Manual SCD1000 – Downlight/LED Smart Connector PROGRAMMING Refer to the Audacy™ system configuration manual to associate smart connectors to other devices and to set up operating parameters for the Audacy™ lighting control system SPECIFICATIONS Item Radio Description 915 MHz External Antenna FCC Part 15 and Industry Canada Contains FCC ID: 2AAMXSDL1000 Regulatory Approvals Contains IC: 11250A-SDL1000 UL916 Transmit Range 300 ft.
PAGE 5
Product Manual SCD1000 – Downlight/LED Smart Connector *Dimensions in inches ND 7943-1 07/2014 Users Manual – SCD1000 Downlight/LED Smart Connector www.idealindustries.
PAGE 6
Product Manual SCD1000 – Downlight/LED Smart Connector SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: contactus@idealindustries.com ND 7943-1 07/2014 Users Manual – SCD1000 Downlight/LED Smart Connector www.idealindustries.
PAGE 7
Product Manual SCD1000 – Downlight/LED Smart Connector COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 8
Product Manual SCD1000 – Downlight/LED Smart Connector IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. IDEAL INDUSTRIES, INC. assumes no liability for misuse of this product.
PAGE 9
Product Manual SCD1000 – Downlight/LED Smart Connector WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of IDEAL.