User's Manual

ManualsBrandsIdeal Industries ManualsElectronicsDigital Transmission System

Product Manual

SCC1000 – Smart Connector

ND 7942-1 11/2014 Users Manual – SCC1000 Smart Connector Page 1

www.idealindustries.com

PRODUCT DESCRIPTION

The AC Smart Connector is a wireless device

which provides electrical connectivity

between the light fixture (load) and 347V

AC line power and provides on/off power

control and dimming signals to the load.

The information that tells the connector to

power on/off/dim the fixture is acquired via

wireless signals that originate from a

building automation system or from room

controls, based on environmental

conditions and/or predetermined

programs.

KEY FEATURES

FCC and IC approved

Flexible wall mounting options

Small form factor with internal antenna

RoHS compliant

PRODUCT CONTENTS

The following items are included inside the

package:

Qty

Description

SCC1000 Smart Connector

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

All other trademarks are the property of their respective owners.

Summary of content (11 pages)

PAGE 1
Product Manual SCC1000 – Smart Connector PRODUCT DESCRIPTION The AC Smart Connector is a wireless device which provides electrical connectivity between the light fixture (load) and 347V AC line power and provides on/off power control and dimming signals to the load. The information that tells the connector to power on/off/dim the fixture is acquired via wireless signals that originate from a building automation system or from room controls, based on environmental conditions and/or predetermined programs.
PAGE 2
Product Manual SCC1000 – Smart Connector IDEAL Model SCL1000 Smart Connector Installation Instructions WARNING: This is a current rated device. Use in applications involving amperage beyond its rating can be dangerous and cause electrical fires. Wiring must comply with all applicable electrical codes. Turn off power before removing or installing connector. LINE neutral & feed-through DIM Connector LINE hot & feed-through Antenna LOAD Connector LINE Connector LINE Connector Fig. 1 Fig.
PAGE 3
Product Manual SCC1000 – Smart Connector Fig. 2. 4. For feed-through (i.e., “daisy-chain”) installations, insert the LINE hot feed-through conductor into the other black line port. Insert the LINE neutral feed-through conductor into the other unmarked LINE port. See Fig. 2. 5. After LINE wire installation, the supply power can safely be disconnected and re-connected without re-installing the wires.
PAGE 4
Product Manual SCC1000 – Smart Connector Fig. 3 Negative/gray/- conductor Positive/purple/+ conductor INSTALLING THE SCL1000 SMART CONNECTOR IN THE FIXTURE 1. After properly installing all wires per the instructions on page 1, fully extend the antenna. See Fig. 1. 2. Remove the backing of the double-sided tape on the SCL1000, exposing the adhesive. 3.
PAGE 5
Product Manual SCC1000 – Smart Connector PROGRAMMING Refer to the Audacy™ system configuration manual to associate smart connectors to other devices and to set up operating parameters for the Audacy™ lighting control system SPECIFICATIONS Item Radio Description 915 MHz External Antenna FCC Part 15 and Industry Canada Contains FCC ID: 2AAMXSCC1000 Regulatory Approvals Contains IC: 11250A-SCC1000 UL916 Transmit Range 300 ft.
PAGE 6
Product Manual SCC1000 – Smart Connector *Dimensions in inches ND 7942-1 11/2014 Users Manual – SCC1000 Smart Connector www.idealindustries.
PAGE 7
Product Manual SCC1000 – Smart Connector SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: contactus@idealindustries.com ND 7942-1 11/2014 Users Manual – SCC1000 Smart Connector www.idealindustries.
PAGE 8
Product Manual SCC1000 – Smart Connector COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This device complies with part 15 of the FCC rules.
PAGE 9
Product Manual SCC1000 – Smart Connector appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ND 7942-1 11/2014 Users Manual – SCC1000 Smart Connector www.idealindustries.
PAGE 10
Product Manual SCC1000 – Smart Connector IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. IDEAL INDUSTRIES, INC. assumes no liability for misuse of this product.
PAGE 11
Product Manual SCC1000 – Smart Connector WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of IDEAL. Subject to the limitations herein, IDEAL warrants that transmitters, when delivered by IDEAL or its authorized distributor, for one (1) year following the delivery date, will be free from defects in material and workmanship and will substantially conform to IDEAL publicly available specifications for such products in effect at the time of delivery.