PROXIMITY READER USER’s MANUAL Philips Mifare™ Compatible Proximity Reader
PROXIMITY READER CONTENTS IDTECK 1. Important Safety Instructions page 3 2. Introduction page 3 3. Features page 3 4. Identifying supplied parts page 4 5. Specification page 4 6. Installation page 4 7. Wire Color Table of the SR30 page 5 8. Output Format page 6 9. Wire Connection to Controller page 7 10. Operation page 7 11. FCC Registration Information page 8 12. Warranty and Service page 9 13.
PROXIMITY READER 1. Important Safety Instructions When using STAR SR30 Philips Mifare™ Compatible Proximity Reader, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons. In addition, the following should also be followed: 1. Read and understand all instructions of the User’s Manual. 2. Follow all warnings and instructions marked on the product. 3. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
PROXIMITY READER 4. Identifying Supplied Parts Please unpack and check the contents of the box. . Reader Module Top Cabinet User’s Manual 5. Specification Read Range Read Format Operating Frequency Compatibility Power : : : : : Output Format External Buzzer control Input LED/Buzzer Color Operating Environment Overall Size (WxHxD) : : : : : : Weight : Up to 4" (10cm) Philips Mifare™ Compatible Proximity Card Format 13.56MHz ISO14443A(Mifare A Type) DC 7V ~ 17V, Max.
PROXIMITY READER 6-4. To detach the top cabinet, hold both sides of the top cabinet and pull down the cabinet (force to down direction) then pull the down part of cabinet toward. 6-5. The maximum Wiegand cable length is 100 meter on a condition described below. - Controller : ICON100 V4.0 or greater - Cable : AWG #24 twisted pair 7.
PROXIMITY READER 8. Output Format 8.1 Wiegand Data format (34-bit/ 26-bit) Bit 1 Bit 2 to Bit33 Bit 34 / Bit 1 / Bit 2 to Bit25 / Bit 26 : Even parity from Bit 2 to Bit 17/ Bit 2 to Bit 13 : 4-byte ID number / 3-byte ID number : Odd parity from Bit 18 to Bit 33/ Bit 14 to Bit 25 Timing diagram 8.2 RS-232C(Optional) Data format START(0x02H) Baud rate DATA LRC IDTECK DATA(10 or 8 char’s) END(0x03H) LRC : 9600 : 10 characters for 4-byte output, 8 characters for 3-byte.
PROXIMITY READER 9. Wire Connection to Controller Access Controller Output Format Wiegand RS-232 STAR SR30 Power DC(+) Power DC(GND) TXD RXD Data-1 Data-0 3-byte/ 4-byte Selection Buzzer Controll Red Black Blue Orange White Green Yellow Brown 10. Operation 10-1. Once power is applied, you should hear two beeping sounds and one red LED is turned on indicating that the reader is in standby mode after a successful initialization and diagnostics. 10-2.
PROXIMITY READER 11. FCC REGISTRATION INFORMATION FCC REQUIREMENTS PART 15 Caution: Any changes or modifications in construction of this device which are not expressly approved by the manufacturer for compliance could void the user's authority to operate the equipment. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2.
PROXIMITY READER 12. Warranty and Service The following warranty and service information applies only to the United States of America and Republic of Korea. For the information in other countries, please contact your local distributor. To obtain in or out of warranty service, please prepay shipment and return the unit to the appropriate facility listed below. IN THE UNITED STATES RF LOGICS Inc. Service Center 3026 Scott Blvd., SANTA CLARA, CA95054 Tel.: (408) 980-0001 Fax.
PROXIMITY READER 13. RMA Request Form & A/S Request Form • RMA REQUEST FORM : ORIGINAL 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, 157-030, Korea TEL : +82-2-2659-0055, FAX ; +82-2-2659-0086, www.idteck.com RMA REQUEST FORM Send To RMA Control Center 5F, Ace Techno Tower B/D 684-1, Deungchon-Dong, Gangsuh-Gu Seoul, 157-030, Korea Sales Person In Charge Shipping Port : Air / Vessel : NO Model 1 2 3 4 5 Engineer Comment RMA No. & Date : Original Invoice No.
PROXIMITY READER • RMA REQUEST FORM : SAMPLE 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, 157-030, Korea TEL : +82-2-2659-0055, FAX ; +82-2-2659-0086, www.idteck.com RMA REQUEST FORM Send To RMA Control Center 5F, Ace Techno Tower B/D 684-1, Deungchon-Dong, Gangsuh-Gu Seoul, 157-030, Korea Sales Person In Charge Karina Kwak Shipping Port : Air / Vessel : NO Model SR30 1 Engineer Comment Narita Air 3 4 5 Requested From : Mr. Luis Castro ABC Company,… address….
PROXIMITY READER • A/S REQUEST FORM : ORIGINAL IDTECK -12- 20031125
PROXIMITY READER • A/S REQUEST FORM : SAMPLE IDTECK -13- 20031125
PROXIMITY READER MEMO IDTECK -14- 20031125
PROXIMITY READER MEMO IDTECK -15- 20031125
PROXIMITY READER The specification contained in this manual are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, 157-030, Korea Tel : (82) 2 2659-0055 Fax : (82) 2 2659-0086 E-mail : webmaster@idteck.com NOV. 2003 Copyright ©2003 IDTECK Co., Ltd.