PROXIMITY READER USER’s MANUAL Philips Mifare™ Compatible Proximity Reader
PROXIMITY READER CONTENTS 1. Important Safety Instructions page 3 2. Product Introduction page 3 3. Features page 4 4. Identifying supplied parts page 4 5. Specification page 4 6. Installation page 5 7. Wire Color Table of the Reader page 5 8. Output Format page 6 9. Wire Connection to Controller page 7 10. Operation page 7 11. FCC Registration Information page 8 12. Warranty and Service page 9 13.
PROXIMITY READER 1. Important Safety Instructions When using STAR SR10/SR20 Philips Mifare™ Compatible Proximity Reader, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons. In addition, the following should also be followed: 1. Read and understand all instructions of the User’s Manual. 2. Follow all warnings and instructions marked on the product. 3. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
PROXIMITY READER 3. Features - Philips Mifare™ Compatible Proximity Reader Maximum 4" (10cm) reading range External LED and Buzzer control inputs 2-Color LED(Red and Green) Indicator and Buzzer sound Output format selectable between 34-bit/26-bit Wiegand Optional RS232 communication port Operating voltage from 7V to 17VDC 4. Identifying Supplied Parts Please unpack and check the contents of the box. Reader Module ea) SR10 Bezel (1 ea) or SR20 Bezel (1 ea) Instruction (1 ea) (1 5.
PROXIMITY READER 6. Installation 6-1. Mullion/Wall Mount Drill two 6-32 or M3 holes 3.3"(8.38cm) apart in vertical and drill one 1/2" hole for the reader cable 1.7"(4.31cm) apart from the top hole. (If you have installed electric gang box then skip this step.) 6-2. Put reader cable into the center hole and install the reader module by using two 6-32 or M3 screws. 6-3. Put bezel into the reader module then push bezel until you hear the locking sound. 7.
PROXIMITY READER 8. Output Format 8-1. Wiegand Output Format Data format (34-bit /26-bit) Bit 1 Bit 2 to Bit33 Bit 34 / Bit 1 / Bit 2 to Bit25 / Bit 26 : Even parity from Bit 2 to Bit 17/ Bit 2 to Bit 13 : 4-byte ID number / 3-byte ID number : Odd parity from Bit 18 to Bit 33/ Bit 14 to Bit 25 Timing diagram 8.2 RS-232C(Optional) Data format START(0x02H) Baud rate DATA LRC IDTECK DATA(10 or 8 char’s) END(0x03H) LRC : 9600 : 10 characters for 4-byte output, 8 characters for 3-byte.
PROXIMITY READER 9. Wire Connection to Controller The brown and the orange wire MUST be left unconnected. The violet wire is reserved for RS-232C output. Please be careful connecting the wires not to make a misconnection. 10. Operation 10-1. Apply power and you can see the red LED is on indicating the reader is on standby. 10-2.
PROXIMITY READER 11. FCC REGISTRATION INFORMATION FCC REQUIREMENTS PART 15 Caution: Any changes or modifications in construction of this device which are not expressly approved by the manufacturer for compliance could void the user's authority to operate the equipment. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2.
PROXIMITY READER 12. Warranty and Service STAR SR10/SR20 Philips Mifare™ Compatible Proximity Reader warranty is valid for 2 years from the shipping date. The following warranty and service information applies only to the United States of America and Republic of Korea. For the information in other countries, please contact your local distributor or suppliers. To obtain in or out of warranty service, please prepay shipment and return the unit to the facility listed below. IN THE UNITED STATES RF LOGICS Inc.
PROXIMITY READER 13. RMA Request Form & A/S Request Form • RMA REQUEST FORM : ORIGINAL 5F, Ace Techno Tower B/D, 684-1, Deungchon Dong, Gangsuh Gu, Seoul, 157-030, Korea TEL : +82-2-2659-0055, FAX ; +82-2-2659-0086, www.idteck.com RMA REQUEST FORM Send To RMA Control Center 5F, Ace Techno Tower B/D 684-1, Deungchon-Dong, Gangsuh-Gu Seoul, 157-030, Korea Sales Person In Charge Shipping Port : Air / Vessel : NO Model Serial Number 1 2 3 4 5 Engineer Comment RMA No. & Date : Original Invoice No.
PROXIMITY READER • RMA REQUEST FORM : SAMPLE 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, 157-030, Korea TEL : +82-2-2659-0055, FAX ; +82-2-2659-0086, www.idteck.com RMA REQUEST FORM Send To RMA Control Center 5F, Ace Techno Tower B/D 684-1, Deungchon-Dong, Gangsuh-Gu Seoul, 157-030, Korea Sales Person In Charge Karina Kwak Shipping Port : Air / Vessel : NO Model SR 10 1 Engineer Comment Narita Air 3 4 5 Requested From : Mr. Luis Castro ABC Company,… address….
PROXIMITY READER • A/S REQUEST FORM : ORIGINAL IDTECK -12- 20031125
PROXIMITY READER • A/S REQUEST FORM : SAMPLE IDTECK -13- 20031125
PROXIMITY READER MEMO IDTECK -14- 20031125
PROXIMITY READER MEMO IDTECK -15- 20031125
PROXIMITY READER The specification contained in this manual are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, 157-030, Korea Tel : (82) 2 2659-0055 Fax : (82) 2 2659-0086 E-mail : webmaster@idteck.com NOV. 2003 Copyright ©2003 IDTECK Co., Ltd.