MODEL : STAR RF10 PROXIMITY READER OWNER’S MANUAL Please read this instruction manual carefully
Contents 1. Important safety instructions 2. General 3. Specification 4. Connection 5. Operation 6. Block diagram 7. FCC Registration information 8.
-2IMPORTANT SAFETY INSTRUCTIONS When using your door access controller, basing safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product 3. Do not use liquid cleaners, or aerosol cleaners. Use a damp cloth for cleaning. if necessary, use a mild soap. 4.
-3STAR RF10 Proximity Reader 1. General The STAR RF10 is a new and an attractive 10cm read range Proximity Reader which can be used in various industrial applications.(Access control, Factory automation and extra) It supports Wiegand format and RS232C(option). This proximity reader will ensure you its successful operations even in harsh environments (vandal proof). The elegant looking reader case is designed to match any interior decoration of ultramodern buildings.
-4WIRE COLOR TABLE COLOR RED GREEN WHITE YELLOW FUNCTION +12V DATA0 DATA1 GND 4. Operation . Connect DC 12V and Wiegand data lines to STAR RF10 proximity reader. . Apply power and red LED of RF10 will lit. . Approach RF card to the reader then reader will beep and green LED will lit for a second then red LED lit again for next reading sequence. . Reader will send 26 bits Wiegnad data to access controller.
-5-
-6- FCC REGISTRATION INFORMATION FCC REQUIREMENTS PART 15 Caution: Any changes or modifications in construction of this device which are not expressly approved by the responsible for compliance cold void the user's authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
-7-
WARRANTY AND SERVICE The following warranty and service information applies only to the U.S. For information in other countries, please contact your local distributor. To obtain in or out of warranty service, please prepay shipment and return the unit to the appropriate facility listed below. IN THE UNITED STATES RF LOGICS, INC. Service center 3026 SCOTT BLVD, SANTA CLARA, CA 95054 Tel. : (408) 980-0001 Fax.: (408) 980-8060 Email: webmaster@rflogics.com Website : www.rflogics.