USER’S MANUAL (IMPORTANT SAFETY INSTRUCTIONS & FCC NOTICE)
√ IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basis safety precautions should always be followed to reduce the risk of life electric shock, and injury to persons, including the following. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinctive change in performance. 13. Avoid using a TRANSIMITTER (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the TRANSIMITTER to report a gas leak in the vicinity of the leak.
√ SAFETY INFORMATIONS FOR ID2400 Your TRANSIMITTER contains a low power transmitter. When the Push-to Talk button is pushed it sends out radio frequency (RF) signals. This device is authorized to operate at a duty factor not to exceed 50% in August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices. CAUTION : To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and antenna at least 0.5 inches (1.
√ IMPORTANT Read this manual before attempting to setup or use this instrument. If contains important Information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. √ WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. If accidentally dropped into water, this product should immediately by unplugged from the AC outlet jack.
To reduce the risk of fire or injure to persons, read and follow these instructions: 1. Use only the following type and the size battery : 1200mAh, 3.6V (LI-ION 1200Ma/3.6V, or equivalent) 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. 4. Do not open or mutilate the battery. Released electrolyte is corrosive and may be toxic if swallowed.
Smart Channel Hopping - During operation, the ID2400TR constantly monitors the transmission for interference. If interference is detected, the phone automatically scans for and hops to the next clear channel. This hopping is instant and does not interrupt normal conversation. Maximum Security - The security code is changed every, selected from one of 2^24million different codes making interception virtually impossible.
4. Push the transmitter TALK button to confirm. If you do not get a lcd display, please refer to the Troubleshooting chart. OPERATION To Start a record (TALK MODE) 1. Press TALK button on the transmitter. The IN-USE indicator will light up solid when it finds a clear channel. 2. Check the recording indicator (after the recorder is working).
Range is limited ♦Raise or reposition the antenna on the docking station. Sign received flutters ♦The transmitter rechargeable Li-ion battery pack may need charging. or fades ♦You may be out of normal operating range. Move closer to the docking station. FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
- Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.