iConnect Premium Active User Manual Important Safety Instructions And Warnings 1. To prevent risk of fire, chemical burn, electrolyte leak, and/or injury from the unit’s internal Lithium-polymer battery: a. Do not attempt to remove the case back or exterior shell of the unit, or to remove its non-user-replaceable battery. b. Do not leave the unit exposed to a heat source or in a high-temperature location (such as in the sun or in an unattended vehicle).
c. Do not puncture or incinerate the unit. d. When storing the unit for an extended time, keep it in the 32°F to 77°F (0°C to 25°C) temperature range. e. Charge the unit only within the 50°F to 113°F (10°C to 45°C) temperature range. f. Do not operate the unit outside the -14 to 104°F (-10°C to 40°C) temperature range. g. Contact your local waste disposal department to properly recycle or dispose of the unit or its battery. 2. Use only the charging cable supplied with this product. 3.
(3) Turn on screen: When the watch is on, touch anywhere on the display area to light up screen. If the “Turn wrist to wake” feature is enabled in the app, the watch screen can be activated by turning the wrist. (4) Shutdown: Enter “Setting” of menu page and tap on “Shutdown”. Tap “OK” to shut down the watch. Or tap on “Shut down” icon in function list and tap “OK” to shutdown the watch. 3. Features and Functions 3.
.2 Connection and Synchronize Data 4.2.1 For Android: Open iConnect By Timex 2 - left slide menu bar – Pair my watch - select the corresponding device icon - search for the corresponding Bluetooth address pairing. Click OK and Click Pair to pair watch as below. 4.2.1.
There will be “Connected” and icon shown on the right of the Bluetooth name of the watch after connected successfully. 4.2.2 Synchronizing Data Pair your watch with " iConnect By Timex 2" App. Press " data will be shown on App accordingly. " to sync data.
Notice: Turning off the Bluetooth function on your phone will interrupt synchronization features between your phone and watch. Please keep Bluetooth turned on. It is recommended to allow the “Location Services” on your phone to the iConnect by Timex 2 App. This will enable the Weather feature as well other functions. 4.2.3 Step History In the App tap on the tile “Today’s Steps” or “Activity data” to enter the “Step History” page.
4.2.4 Adding Friends Add friends to compete in daily activity with each other. Enter the “My Friend” in the Navigation menu. Tap on the “add friend” icon at the top right corner to enter the “Add friend” page. Type the email address of desired friend and search. The users with the name you searched will be listed. Tap on the “Add friend” button to add the friend. 5 5.2.4 Leaderboard Shows the ranking among added friends by daily activity. 4.3 Main Features 4.3.
4.3.2 Heart rate (1) Heart rate measurement: The watch will measure the user's heart rate under the heart rate measurement interface. After the test is completed, the vibration will display the result. (2) Heart rate measurement: slide to the left on the main interface and click the heart rate static icon to switch to the heart rate measurement interface. Once the interface is entered, the measurement will start. "- -" is shown on screen when the watch starts the measurement.
by tapping on the “pause” icon at the bottom right corner of the screen. After pausing, you can resume the tracking by tapping on the “play” icon at the bottom right corner or stop the tracking by tapping on the “stop” icon at the bottom left corner. Please note that the watch supports 4 hours of workout tracking. Timer 4.3.6 Tap on the Timer icon to enter the stopwatch interface. For counting-up timer, ensure the correct icon on top side has been tapped.
4.3.7 Weather After connected to the iConnect By Timex 2, the watch will show local weather. The High and Low value of temperature will be displayed. 4.3.8 Relax Relax with iConnect Premium. Set the Relax mode to 1 or 2 minutes and the follow the instructions on the screen for guided breathing. 4.3.9 Music control Use this feature to Play, Pause or Skip music on your Phone from your watch. You must already have your music application open and running on your phone. 4.3.
5. Features in the iConnect By Timex 2 App 5.1 Sleep Monitor. Wearing the watch at night will allow you to monitor your sleep schedule and analyze the quality of your sleep according to your nocturnal movements. 5.2 Heart Rate Monitoring. The watch will automatically monitor your heart rate in 5 minute intervals and the measured HR value will be synced to the App automatically.
5.3 My Friends Add friends to compete on daily activity with each other. Enter the “My Friend” in the Navigation menu. Tap on the “add friend” icon at the top right corner to enter “Add friend” page. Type the email address of desired friend and search. The users with the name searched will be listed. Tap on the “Add friend” button to add the friend. 5.4 Leaderboard Show the ranking among added friends by daily activity. 5.
top right corner to check the real-time location tracking. Press the “Pause” icon to pause the workout. Then press and hold the “Stop” button for several seconds to end the workout. There will be a record of the workout stored on the Motion Record page. You can always check the workout details by taping on the record.
The Motion Record support sharing the workout record to Strava, Google fit, Apple Health and also third-party apps. = 5.6 Pair My Watch Pair the watch by following the steps shown on the App. After the watch is successfully paired the below features are available: Notification Settings After connecting the watch to the phone, enter “Pair my watch” -> “Notification Settings” to enable the watch to receive messages, caller ID and other notifications.
Sedentary alert After connecting the watch to the phone, enter “Pair my watch” -> “Sedentary alert”. Set the start time and end time of sedentary reminder. Push the Sedentary alert button to right to activate the feature. If user is not active for 1 hour, device will vibrate to remind you to get up and move. Drinking water reminder After connecting the watch to the phone, enter “Pair my watch” -> “Drink water reminder”. Set the start time and end time of the drink water reminder.
The watch will show a drink icon and vibrate to remind the user to drink every 30 minutes. Alarm Setting After connecting to the phone, enter the “Pair my watch” -> “Alarm setting”, add the new alarm; The watch will vibrate when the preset alarm time is reached. The alarm clock can be set daily or the day of a week, and you can create up to 5 alarm clocks. Remote Camera control After connecting to the phone, enter Pair my watch -> “Camera control” . The phone will enter camera UI automatically.
Left hand or right hand Choose which hand you will wear the watch. Turn wrist to wake Turn on this option to allow waking up the screen on by turning wrist. Daily heart rate monitoring Turn on this feature to enable the automatic heart rate monitoring in the “Routine” page of the Heart Rate Monitoring feature. Time display Set the time of data format to 12-hour or 24-hour. Reset Reset the watch in factory default. Please note all data on watch will be cleared. Unpair Unpair the watch from the phone.
5.9 Unit Set the unit of parameters shown on the watch and App to be Imperial or Metric. 5.9 Temperature Set the temperature shown on the watch and App to be Celsius or Fahrenheit. 5.9 Find Watch When the watch is connected successfully to the App, tap on the “Find Watch” in the App, the icon below will be shown on the watch as the indication of the connected watch. 5.10 STRAVA Authorize the App to upload Motion Record to STRAVA.
IP68 Water Resistance The watch is rated IP68 for dust and water resistance. The watch is resistant to submersion in fresh water up to a maximum depth of 1.5 meters for up to 30 minutes. Care should be taken to avoid over exposure to moisture and excessive submersion in water.
Medical Devices Operation of radio transmitting equipment, including wireless phones, may interfere with the function of inadequately shielded medical devices. Consult a physician or the medical device's manufacturer to determine if it is adequately shielded from external radio energy. To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 6 inches (15.3 centimeters) between a wireless device and the medical device.
Timex International Warranty www.timex.com/Warranty or www.timex.ca/Warranty FCC Notice (U.S.) / IC Notice (Canada) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
DECLARATION OF CONFORMITY Manufacturers Name: Timex Group USA, Inc. Manufacturers Address: 555 Christian Road Middlebury, CT 06762 United States of America declares that the product: Product Name: Model Numbers: iConnect Premium By Timex® M05L is in conformity with the relevant EU harmonized legislations.